1. Introduction and Product Overview
The JK SMART BMS JK-B1A8S10P is an advanced Battery Management System designed for various battery types including LiFePO4, Li-ion, and LTO. It features active balancing, robust protection mechanisms, and smart monitoring capabilities via Bluetooth.

Product Advantages:
- Active balance for superior durability, long life, and stable performance.
- Real-time active energy transfer equalization using a supercapacitor (Patent number: ZL 2019 2 0479589.6).
- Single cell voltage range of 1V~5V with an equalization accuracy of ±5mV.
- Achieves 2-10A continuous balanced current to ensure battery consistency, improve cruising range, and extend battery life.
- Mobile phone Bluetooth communication with a dedicated APP for real-time battery status monitoring, compatible with Android and iOS.
- Supports balanced cascading for systems with more than 24 battery packs.
- Compatible with lithium iron phosphate, ternary lithium, lithium titanate, and other battery types.


Applications:
The JK SMART BMS is suitable for a wide range of applications, including:

2. Package Contents
The standard package includes the following items:
- 1 x BMS (with built-in Bluetooth module)
- 1 x Temperature sensor (40cm)
- 1 x Balance Wires (75cm)
- 1 x Active Switch (15cm)
- 2 x Screws
Optional (for BMS with Heat Function):
- 1 x Heating cable
Note:
- Due to different supported voltage ranges, accessories like RS485 and LCD for B1A8S20P/B2A8S20P models may not be interchangeable with other BMS models. The Power Board version is generally the same. Please verify compatibility before purchasing additional accessories.
- LCD and RS485 interfaces are configured by default.
3. Specifications
The JK SMART BMS JK-B1A8S10P offers robust features for battery management. Detailed specifications are provided below:
| Attribute | Value |
|---|---|
| Brand Name | JIKONG |
| Type | LIFEPO4 Battery BMS |
| Balance Function | Active Balanced BMS |
| Hardware or Smart | SMART BMS |
| Charge and Discharge Port | Common Port BMS |
| Charging Current | 100A |
| Battery series | 4S 5S 6S 7S 8S |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Over charge protection | YES |
| Over discharge voltage | YES |
| Short circuit protection | YES |
| Over current protection | YES |
| Dropout protection | YES |
| Over temperature protection | YES |
| Balance function | YES |
| Bluetooth | YES |
| RS-485 | YES |
| GPS | According to Customer need |
| CAN | According to Customer need |
| Accessory | Wire cable is free |
| Balance Mode | Active balance |
| Suitable for battery type | lithium iron phosphate, ternary lithium, lithium titanate and other battery types. |
| Single voltage range | 1V~5V |
| Certification | CE, RoHS |
| Origin | Mainland China |

4. Setup and Installation
4.1 Basic Wiring Diagram
Refer to the following diagram for the basic connection of the BMS to your battery pack, charger, and controller.

4.2 Detailed 5-Step Wiring Method
Follow these steps carefully for proper installation:

- Find the P-, B- position: Locate the P- and B- positions on the protection board as shown in the figure. The B- corresponds to the black row of wires. Ensure the cable is inserted correctly, paying attention to the front and back of the cable.
- Find the total negative terminal: Identify the total negative terminal of your battery pack. This is the first string of batteries. For example, with an 18650 Carp battery pack, different battery packs have different positive and negative positions. Use a multimeter to verify. Total Voltage = Number of Strings * Voltage of Single String Battery.
- Connect the first wire: Connect the first wire to the negative terminal of the battery, the second wire to the positive terminal of the first series of batteries, the third wire to the positive terminal of the second series of batteries, and so on. Wires must be connected in order; do not skip any string numbers.
- Measure voltage: In the head of the line from the first line, measure the voltage between each of the two lines. For ternary batteries (3V-4.2V) and iron batteries (2.5-3.6V), if the measurement of the voltage is outside the range, it indicates an incorrect connection. Double-check the line and ensure it is plugged into the correct position before connecting to the protection board. Incorrect wiring can damage the board.
- Final connection: After confirming all wires are correctly connected, connect B- to the total negative terminal of the battery (wire length within 15CM is good). Then insert the connected wires, measure the protection board B- and the total positive voltage. This should equal the total positive voltage of the P- and equal to the total positive voltage, representing that charging and discharging interface negative terminal and total positive terminal are correctly connected.
4.3 Parallel Operation
If you need to use multiple BMS units in parallel, a Fast Class T Fuse or a high-power discharge diode (selected according to load) must be added to each battery pack.

4.4 Connection Mode Examples
The BMS supports various series configurations. Refer to the diagrams below for examples of common connection modes.

4.5 Interface Descriptions
The BMS features several interfaces for various functions:

- ① Temperature sensor: Used to detect battery temperature.
- ② RS485 interface: All JK BMS models are configured with RS485 function by default.
- ③ LCD interface: All JK BMS models (except JK-BD4A17S4P) are configured with an LCD interface by default.
- ④ Heat Function interface: Heating function can be customized.
- ⑤ CANBUS interface: Requires customization.
5. Operating Instructions
5.1 Mobile APP Usage
The JK BMS can be monitored and controlled via a mobile application. Follow these steps to get started:

- Download the specified Bluetooth application:
- iOS: Search for "JIKONG BMS" in the APP STORE.
- Android: Download from https://www.pgyer.com/Cfq3.
- Hardware connection: Ensure the BMS is correctly wired to the battery pack.
- Startup: Activate the BMS.
- Open the APP and connect the device: Turn on your mobile device's Bluetooth, open the JIKONG BMS app, and search for the relevant serial number to connect. The default password for first-time setup is 123456.
- Check the battery status: Once connected, you can view real-time battery status, cell voltages, current, and other data.
5.2 Smart Energy Working Modes
The BMS supports different working modes to optimize battery usage and protection:

- Storage Mode: In transportation, storage, offline, or wireless transmission off mode, the BMS does not consume battery pack current.
- Normal Working Mode: When the charger is inserted in Storage Mode and off mode, the BMS immediately returns to Normal Working Mode, and all protection functions, equalization functions, and communication functions return to normal working.
- Shutdown: To prevent power wastage during long periods of disuse and to protect the battery pack, the BMS automatically shuts down when a cell falls below the shutdown voltage.
- Standby Mode: When the battery pack is in a static state (no charge and discharge current and no equilibrium current), the BMS will automatically enter Standby Mode after the set time (1-30 days can be set) is exceeded.
6. Maintenance
Heating Function (if applicable):
For BMS models with the heating function, the green 5PIN cable of the heating cable needs to be linked to the heating pad. The remaining black and red cables are linked to the smart charger. After the smart charger links the BMS, it detects the battery temperature through the BMS, which automatically monitors the charging status of the battery.
Description of heating function: If the battery temperature is below the low-temperature charge protection threshold, charging will be turned off, and heating will be activated. The cryogenic charge protection is a parameter that can be set within the APP. The heating power depends on the battery voltage and the resistance value of the heating film.
Security Protection Features:
The BMS is equipped with six security protection features to ensure battery safety and longevity:

- Overcharge Protection: Prevents over-charging, which can affect battery life.
- Short Circuit Protection: Automatic protection when a short circuit occurs.
- Over Discharge Protection: Prevents the battery from running out completely.
- Overcurrent Protection: Prevents the current from exceeding the battery's safe range.
- ALL-IN Protection: Prevents issues from cable drop or poor contact.
- Over Temperature Protection: Prevents the battery from overheating.
7. Troubleshooting
Common Faults and Solutions:
If you encounter any issues with your JK SMART BMS, refer to the following troubleshooting guide:
No Power On:
- Ensure that the last "B+" line has been connected to the battery's total positive pole.
- For charge activation, ensure the charger voltage is more than 4V above the battery pack voltage to activate the BMS.
- Check whether the charger has voltage output.
Voltage Inaccuracy:
Measure the actual total voltage of the battery pack with a multimeter. Then, input this actual total voltage into the "Voltage Calibration" setting within the mobile APP.
Current Inaccuracy:
- Ensure that both BMS B- and P- terminals are connected using two 7AWG wires in parallel. Failure to do so will lead to current errors.
- Use a clamp meter to measure the actual current of the battery pack. Input this actual current into the "Current Calibration" setting within the mobile APP. A larger actual current measurement will result in higher calibration accuracy.
Capacity Inaccuracy:
- Set the battery capacity in the APP. For example, if your battery capacity is 100AH, you can set it to 120AH or 150AH.
- Discharge the battery using an electric instrument until the protection board triggers single cell undervoltage protection.
- Charge the battery without interruption until the BMS prompts single cell over-voltage protection.
After completing these steps, the capacity will automatically update in the APP, showing the actual battery capacity and accurate State of Charge (SOC).
The number of designed strings does not match the actual number of strings:
- Check if the "number of single unit" parameter is set correctly within the APP settings.
- If there is no voltage in the middle of a 2S or more string configuration, check whether the collection line is disconnected or faulty.
8. User Tips
While no specific user reviews or Q&A were provided, general tips for BMS users include:
- Always double-check all wiring connections before powering on the system to prevent damage.
- Regularly monitor battery parameters via the mobile app to ensure optimal performance and identify potential issues early.
- Keep the BMS firmware updated to benefit from the latest features and bug fixes.
- Ensure your charger is compatible with your battery type (e.g., LiFePO4 charger for LiFePO4 batteries) to avoid overcharging or damage.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Keep your purchase receipt and product serial number handy for faster service.