MOULD KING 27005 Sport Speed Racing Car Model Building Kit

Introduction

Thank you for choosing the MOULD KING Sport Speed Racing Car Model building kit. This manual provides comprehensive instructions for assembling your model, along with important safety information, care guidelines, and troubleshooting tips. Please read this manual carefully before beginning assembly to ensure a smooth and enjoyable building experience.

Image: Overview of various MOULD KING racing car models and display box options.

Safety Information

⚠ WARNING: CHOKING HAZARD - Small Parts

• This product contains small parts that may present a choking hazard if swallowed.
• Not suitable for children under 3 years old.
• Adult supervision is strongly recommended during assembly, especially for younger builders.

Age Recommendation: 8+

California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Your MOULD KING building kit typically includes:

• Building blocks (number varies by model, e.g., Model 27005: 330+ pieces, Model 27006: 329+ pieces, Model 27007: 398+ pieces)
• Numbered bags containing sorted parts
• Paper instruction manual
• Exquisite stickers (for detailing)
• Optional: Acrylic display box (may be included or sold separately)

Image: Red racing car model with text indicating detailed instructions for easy assembly.

Assembly Instructions

STEP 1 - UNBOX & INSPECT

Check All Components Before Building

1. Carefully open the package and remove all contents.
2. Verify that all numbered bags are present.
3. Check that no parts are missing or damaged.
4. Sort the bags according to their numbers for easier assembly.

Electronic Components Inspection (If applicable)

If your set includes motors, battery boxes, lights, or other electronic parts:

• ✓ Install the batteries according to the instructions.
• ✓ Connect each motor to the power supply.
• ✓ Test all motors and electronic components before assembly.
• ✓ Ensure all functions operate normally.

Important: If any electronic component does not work properly, please contact customer support before proceeding with assembly.

Building Tips

• Assemble on a clean, flat, and well-lit surface.
• Keep small parts organized in trays or containers.
• Keep all packaging materials until assembly is completed.
• Adult supervision is recommended for younger builders.

STEP 2 - FOLLOW THE INSTRUCTIONS

Build in Numerical Order

1. Open the instruction manual.
2. Begin with Bag No. 1 and follow each step carefully.
3. Complete all steps from Bag No. 1 before opening the next bag.
4. Continue with Bag No. 2.
5. Then proceed to Bag No. 3.
6. Continue in numerical order until the model is fully assembled.

During Assembly

• ✓ Carefully compare your build with the illustrations.
• ✓ Ensure parts are installed in the correct orientation.
• ✓ Press pieces together firmly, but do not use excessive force.
• ✓ Double-check completed sections before moving to the next step.
• ✓ Follow wiring diagrams carefully when connecting electronic components (if applicable).

Helpful Advice

• Take your time and enjoy the building experience.
• If a mistake is discovered, carefully disassemble only the affected section.
• Keep spare parts in a safe place throughout the build.

STEP 3 - COMPLETE & ENJOY

Final Inspection

Once assembly is complete:

• ✓ Check that all parts are securely connected.
• ✓ Verify that moving functions operate smoothly.
• ✓ Test motors, lights, and remote-control functions (if included).
• ✓ Ensure no parts remain unused except designated spare pieces.

Capture the Moment

Congratulations on completing your model! Take photos or videos of your finished creation and share your building experience with friends, family, and fellow building enthusiasts. Display your model proudly and enjoy the results of your hard work.

Image: Red racing car model displayed inside an acrylic display box (L:19.5cm W:9.5cm H:8.5cm).

Image: Empty acrylic display box with base studs for securing the model.

Operating Instructions

Once assembled, your MOULD KING racing car model is designed for display and interactive play. Many models feature an inertial driving mechanism, allowing for smooth gliding motion.

Image: Red racing car model demonstrating inertial driving feature with arrows indicating forward motion.

Specific interactive features may include:

• Steering Wheel: May be turnable.
• Rear Cover: May be openable.
• Rearview Mirrors: May be rotatable.
• Tail/Tail Wing: May be swingable or adjustable.

Image: Detailed features of the red 488 GTB car (Model 27006), including steerable wheel, exquisite stickers, openable rear cover, and rotatable rearview mirror.

Image: Detailed features of the blue 918 RSR car, including artificial glass, swingable tail, simulation tail lights, and rotatable rearview mirror.

Image: Detailed features of the grey VENENO car (Model 27007), including artificial glass, swingable tail wing, and rotatable rearview mirror.

Care & Maintenance

• Keep the model away from excessive heat, moisture, and direct sunlight to prevent deformation or discoloration of the plastic blocks.
• Remove batteries during long-term storage (if electronic components are included).
• Clean dust regularly using a soft brush or microfiber cloth. Avoid harsh chemicals or abrasive materials.
• Store spare parts and instructions in a safe place for future reference.

Troubleshooting

• Missing or Damaged Parts: If you discover any missing or damaged parts during inspection or assembly, please contact customer support for assistance.
• Assembly Difficulties: Refer to the detailed instruction manual and ensure all steps are followed in numerical order. Double-check connections and orientations.
• Electronic Components Not Functioning: If your set includes electronic parts and they are not working, ensure batteries are correctly installed and charged, and all connections are secure. If the issue persists, contact customer support.
• Model Instability: Ensure all blocks are pressed firmly together. Review the assembly steps for any missed connections.

Specifications

Model Specifics:

• Model 27005 (918 RSR): 330+ pieces. Dimensions: Length 15.7cm, Width 7.5cm, Height 4.5cm.
• Model 27006 (488 GTB): 329+ pieces. Dimensions: Length 15.4cm, Width 8.6cm, Height 4.3cm.
• Model 27007 (VENENO): 398+ pieces. Dimensions: Length 16.4cm, Width 8cm, Height 4.5cm.

Image: Dimensions for Model 27005 (918 RSR) - Length 15.7cm, Width 7.5cm, Height 4.5cm, with 330+ pieces.

Image: Dimensions for Model 27006 (488 GTB) - Length 15.4cm, Width 8.6cm, Height 4.3cm, with 329+ pieces.

Image: Dimensions for Model 27007 (VENENO) - Length 16.4cm, Width 8cm, Height 4.5cm, with 398+ pieces.

User Tips

• Organize Parts: Before starting, sort all pieces by color and type into separate containers or trays. This significantly speeds up the building process.
• Follow Instructions Closely: The instruction manual is designed for sequential building. Do not skip steps or open bags out of order unless explicitly instructed.
• Check Connections: Ensure each block is firmly connected to avoid loose sections in the final model.
• Display with Pride: Consider purchasing an acrylic display case to protect your finished model from dust and damage, while showcasing its intricate details.

Image: Icons representing key features such as simulation model, taxiing vehicle, tight stitching, puzzle assembly, and gift collection.

Warranty & Support

For any questions, missing parts, or issues with your MOULD KING building kit, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase.

A digital version of the user manual (PDF) can be found here: MOULD KING Building Blocks User Manual (PDF).

We hope you enjoy every step of the building journey and create unforgettable memories with your completed model. Happy Building!