Estardyn Dual USB 5V 1A 2.1A Mobile Power Bank Module (H913-A V2.0)

Contents

EstarDyn Dual USB Mobile Power Bank Module User Manual

Model: Dual USB 5V 1A 2.1A Mobile Power Bank Module (H913-A V2.0)

1. Product Overview

The EstarDyn Dual USB Mobile Power Bank Module is a circuit board designed for DIY power bank projects. It allows users to create their own portable charging solutions using 18650 liquid lithium-ion batteries. The module integrates charging, discharging, and protection functions, along with an intelligent digital display to show the charging status and battery percentage.

EstarDyn Power Bank Module, top and bottom view with LCD display

Figure 1: EstarDyn Dual USB Mobile Power Bank Module (Top and Bottom View)

Animated GIF of the LCD display showing percentage and IN/OUT status

Figure 2: Animated LCD Display showing charge status

2. Specifications

FeatureDetail
Micro USB Input5V 1A
USB Output5V 2.1A / 5V 1A (Dual USB interface)
Charging DisplayIntelligent Digital Display (LCD)
Compatible Batteries18650 Liquid Lithium-ion Batteries
Product Dimensions57mm x 28mm
Screen Dimensions27mm x 17mm
Operating Temperature-40°C to +85°C
Protection FunctionsOvercharge, Over-discharge, Overcurrent
Package TypeSMD
High-concerned chemicalNone
Typical Package Weight0.02 kg
Typical Package Size12cm x 8cm x 2cm

3. Setup and Installation

This module is intended for users with basic electronic assembly knowledge. Incorrect wiring can damage the module or connected components.

3.1 Battery Connection

  1. Identify the battery connection points on the circuit board: B- for the negative terminal and B+ for the positive terminal.
  2. Connect your 18650 liquid lithium-ion batteries in parallel to these points. Ensure correct polarity: connect the battery negative to B- and the battery positive to B+.
  3. WARNING: Connecting the battery with reversed polarity (B- to positive, B+ to negative) will permanently damage the circuit board.
  4. When welding or assembling, ensure proper insulation between the battery terminals and the circuit board. Battery leads must not touch any other part of the circuit board to prevent short circuits.
Detailed connection diagram for the module, showing B+, B-, LED, USB ports, and switch

Figure 3: Module Connection Diagram

3.2 Initial Power-Up

After connecting the batteries, the intelligent digital display (LCD) should activate, showing the current battery percentage. If it does not, double-check your battery connections and polarity.

4. Operating Instructions

4.1 Charging the Power Bank Module

  • Connect a 5V 1A Micro USB power adapter to the Micro USB input port on the module.
  • The LCD display will show the charging status, typically indicating 'IN' and the increasing battery percentage.
  • The module features overcharge protection and will automatically stop charging once the batteries are full, preventing damage.

4.2 Discharging (Charging External Devices)

  • Connect your external device (e.g., smartphone, tablet) to one of the two USB output ports using a compatible USB cable.
  • The module provides dual USB output: one port delivers 5V 2.1A, and the other delivers 5V 1A. Choose the appropriate port for your device's charging requirements.
  • The LCD display will show the discharging status, typically indicating 'OUT' and the decreasing battery percentage.
  • The output voltage and current are stable, designed not to harm connected devices.

5. Maintenance and Care

  • Ensure the module is kept in a dry environment, away from moisture and extreme temperatures. The operating temperature range is -40°C to +85°C.
  • Regularly inspect battery connections for any signs of wear or loose contacts.
  • Always maintain proper insulation between battery components and the circuit board to prevent short circuits.
  • Avoid physical impact or dropping the module, as this can damage sensitive electronic components.
  • Clean the module gently with a dry, soft cloth if necessary. Do not use liquids or harsh chemicals.

6. Troubleshooting

  • Module does not power on / LCD is blank:
    - Check battery connections and ensure correct polarity (B+ to positive, B- to negative). Reversed polarity will burn the board.
    - Ensure batteries are charged.
  • Device not charging from USB output:
    - Verify the power bank module itself is charged.
    - Try a different USB cable and/or device.
    - Ensure the device is connected to the correct USB output port (1A or 2.1A).
  • Module gets excessively hot:
    - Disconnect all power sources and devices immediately.
    - This could indicate a short circuit or an overloaded condition. Recheck all wiring and ensure proper insulation.
  • LCD display shows incorrect percentage:
    - This may occur if batteries are not properly balanced or are faulty. Consider testing individual batteries.

7. User Tips

  • Battery Selection: Use high-quality, matched 18650 batteries for optimal performance and longevity of your DIY power bank.
  • Enclosure Design: When designing an enclosure for your power bank, ensure adequate ventilation for the module and batteries, and provide easy access to the Micro USB input and Dual USB output ports.
  • Insulation is Key: Always prioritize proper insulation for all connections, especially around the battery terminals, to prevent accidental short circuits.
  • Testing: Before final assembly, thoroughly test all connections and functionalities to ensure safe and correct operation.

8. Warranty and Support

For warranty information or technical support regarding your EstarDyn Mobile Power Bank Module, please contact the seller or manufacturer directly. Keep your purchase records for reference.

9. Compliance and Safety Information

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Always handle electronic components with care and follow all safety guidelines for DIY electronics projects.

© 2024 EstarDyn. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.