Estardyn 2.8 inch TFT LCD Display ST7789V

Contents

Estardyn 2.8 inch TFT LCD Display User Manual

Model: 2.8 inch TFT LCD Display ST7789V

Brand: Estardyn

1. Introduction

This manual provides comprehensive instructions for the Estardyn 2.8 inch TFT LCD Display module. This module features a 240x320 pixel resolution, driven by the ST7789V controller, and offers flexible connectivity options including SPI and 8/16-bit parallel port interfaces. It is designed for integration into various embedded systems and microcontroller projects, such as those based on Arduino platforms.

Front view of the Estardyn 2.8 inch TFT LCD Display module showing a colorful landscape image.
Figure 1: Front view of the 2.8 inch TFT LCD Display module.

2. Package Contents

The package typically includes:

  • 1 x Estardyn 2.8 inch TFT LCD Display Module

No additional accessories are typically included unless specified by the seller.

3. Specifications

FeatureDescription
Brand NameEstardyn
Model Number2.8 inch display oled (Note: Product is TFT, not OLED)
TypeTFT LCD
Display Mode1
Resolution240*320 (RGB)
Driver ICST7789V
InterfaceSPI, 8-bit Parallel, 16-bit Parallel
Viewing DirectionIPS/ALL Viewing
Module Dimensions (W x H)48.43 mm x 77.15 mm
LCD Area (W x H)47.2 mm x 66.2 mm
Active Area (W x H)43.2 mm x 57.6 mm
PCB Thickness1.20 mm
Technical drawing of the 2.8 inch TFT LCD module with dimensions and pinout details.
Figure 2: Technical drawing with dimensions and pinout.

4. Setup and Connection

This display module supports multiple interfaces. Ensure your microcontroller is compatible with the chosen interface (SPI or 8/16-bit parallel).

4.1 Pinout Description

The module features two connectors. The top connector (10 pins) is primarily used for SPI communication and control signals. The bottom connector (18 pins) is used for parallel interface data lines.

Back view of the 2.8 inch TFT LCD module showing pin labels for the top connector and interface selection pins.
Figure 3: Back view of the module with pin labels.
Pin NameDescription
SDA-0SPI Data / Parallel Data Line
SCL-1SPI Clock / Parallel Data Line
CS-2Chip Select
DC-3Data/Command Select
RST-4Reset Pin
BL-5Backlight Control
GNDGround
VCCPower Supply (typically 3.3V)
IM0Interface Mode Select Bit 0
IM1Interface Mode Select Bit 1
IM2Interface Mode Select Bit 2 (typically 0 for common modes)

4.2 Interface Mode Selection

The IM0, IM1, and IM2 pins determine the communication interface. Connect these pins to VCC (logic high) or GND (logic low) according to the desired mode:

ModeIM0IM1IM2
SPIGND (0)GND (0)GND (0)
8080-8P (8-bit Parallel)VCC (1)GND (0)GND (0)
8080-16P (16-bit Parallel)GND (0)VCC (1)GND (0)

4.3 General Connection Steps (Example for SPI with Arduino)

  1. Power Supply: Connect the VCC pin to your microcontroller's 3.3V output and GND to ground.
  2. SPI Connections:
    • Connect SDA-0 (MOSI) to your microcontroller's MOSI pin.
    • Connect SCL-1 (SCK) to your microcontroller's SCK pin.
    • Connect CS-2 (Chip Select) to a digital output pin on your microcontroller.
    • Connect DC-3 (Data/Command) to a digital output pin on your microcontroller.
    • Connect RST-4 (Reset) to a digital output pin on your microcontroller (or directly to 3.3V if not using software reset).
  3. Backlight: Connect BL-5 to a digital output pin for backlight control, or directly to 3.3V for constant backlight.
  4. Interface Mode: Ensure IM0, IM1, and IM2 are set correctly for SPI mode (all connected to GND).
  5. Software Setup: Install the appropriate display library (e.g., Adafruit GFX Library and Adafruit ST7789 Library for Arduino) and configure it with the correct pin assignments.

Refer to your specific microcontroller's documentation and the display library examples for detailed wiring diagrams and code examples.

5. Operation

Once connected and powered, the display module is controlled via software on your microcontroller. The ST7789V driver IC handles the low-level display operations.

5.1 Basic Display Functions

  • Initialization: The display requires an initialization sequence sent via the chosen interface (SPI or parallel) to configure the driver IC. This is typically handled by the display library.
  • Drawing Graphics: Use library functions to draw pixels, lines, rectangles, circles, text, and images.
  • Color Depth: The display supports various color depths. Configure your library to match the desired color format (e.g., 16-bit RGB565).
  • Orientation: The display orientation (portrait or landscape) can usually be set in software.
  • Backlight Control: If BL-5 is connected to a PWM-capable pin, you can control the backlight brightness.

Consult the documentation of your chosen display library for specific function calls and examples.

6. Maintenance

  • Cleaning: Use a soft, lint-free cloth, slightly dampened with water or a mild screen cleaner, to gently wipe the display surface. Avoid harsh chemicals or abrasive materials.
  • Handling: Handle the module by its edges to avoid touching the display surface or the delicate flex cables.
  • Storage: Store the module in an anti-static bag in a cool, dry place away from direct sunlight and extreme temperatures.
  • Power: Always ensure correct voltage (VCC) is applied. Over-voltage can permanently damage the module.

7. Troubleshooting

  • Display Not Lighting Up:
    • Check power connections (VCC and GND).
    • Ensure the backlight pin (BL-5) is correctly connected and receiving power.
    • Verify the initialization sequence in your code.
  • Garbled or No Display Output:
    • Double-check all data and control line connections (SDA, SCL, CS, DC, RST for SPI; data lines for parallel).
    • Confirm the correct interface mode is selected via IM0, IM1, IM2 pins.
    • Verify that the correct display driver (ST7789V) is selected in your software library.
    • Ensure your microcontroller's logic levels are compatible with the display module (typically 3.3V).
  • Incorrect Colors:
    • Check the color depth and format settings in your display library (e.g., RGB565).
  • Display Flickering:
    • Ensure stable power supply.
    • Check for loose connections.

8. User Tips

  • When using with Arduino, consider using a dedicated library like Adafruit_GFX and Adafruit_ST7789 for easier integration and example code.
  • Always verify the voltage requirements of the display module and your microcontroller to prevent damage.
  • For parallel interface, ensure all data lines are connected correctly and in the right order.

9. Warranty and Support

This product is typically covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, technical support, or assistance with troubleshooting, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.