Ligghig E27 Radar Induction Lamp Holder

Contents

E27 Radar Induction Lamp Holder User Manual

Model: E27 Radar Induction Lamp Holder | Brand: Ligghig

1. Product Overview

The E27 Radar Induction Lamp Holder is a compact and convenient device designed to automate lighting in various spaces. It features advanced radar sensing technology to detect motion, automatically turning lights on when movement is detected and off when the area is vacated. This eliminates the need for manual switches and complex wiring, offering an energy-efficient lighting solution.

Key features include:

  • Compact and portable design.
  • Automatic light activation upon entry and deactivation upon exit.
  • Easy and fast installation without the need for wiring or networking.
  • Sensitive response with a wide sensing angle.
  • Compatibility with various E27 bulb types.
E27 Radar Sensor Light Head components
The E27 Radar Sensor Light Head, highlighting its wire-free induction switch light functionality, no internet or cranking required.

2. Installation Guide

Installation of the radar induction lamp holder is straightforward and requires no special tools or wiring. Ensure the power to the lamp holder is OFF before beginning installation.

  1. Remove Existing Bulb: Carefully unscrew the existing E27 light bulb from its lamp holder.
  2. Install Radar Sensor: Screw the E27 Radar Induction Lamp Holder into the existing E27 lamp base.
  3. Install Light Bulb: Screw your E27 light bulb (LED or energy-saving, up to 100W) into the radar induction lamp holder.
  4. Restore Power: Turn the power back ON. The light should now operate automatically based on motion detection.
E27 Radar Induction Lamp Holder in use with a bulb
The lamp holder in operation, demonstrating automatic light activation, 0.1-second response, and auto-sensing delayed shut-off within a 1-7 meter range.
Video demonstrating the installation process and motion sensing capabilities of the E27 Radar Induction Lamp Holder, including a test of its detection range and automatic shut-off function.

3. Operating Instructions

The E27 Radar Induction Lamp Holder operates automatically based on motion detection. Once installed, it requires no further interaction.

  • Automatic Activation: When motion is detected within the sensing range, the connected E27 bulb will illuminate instantly (approximately 0.1-second response).
  • Automatic Deactivation: After motion ceases, the light will remain on for a short delay (approximately 30 seconds, as observed in testing) before automatically turning off.
  • Sensing Range: The effective sensing distance is approximately 3-8 meters, with a 360-degree sensing angle.
Radar Sensing Conversion Head E27 in action
Illustration of the radar sensing conversion head, showing it is not networked, has an induction range of 4-8 meters, is compatible with multiple lights, and automatically turns lights on when people come and off when they leave.

4. Maintenance

To ensure optimal performance and longevity of your E27 Radar Induction Lamp Holder, follow these simple maintenance guidelines:

  • Cleaning: Periodically wipe the surface of the lamp holder with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
  • Inspection: Regularly check for any visible damage or loose connections. If any issues are found, discontinue use and consult a qualified electrician.
  • Environment: Ensure the lamp holder is used within its specified working temperature range (-20~40℃) and in a dry environment to prevent damage.

5. Troubleshooting

If you encounter any issues with your E27 Radar Induction Lamp Holder, please refer to the following common troubleshooting steps:

  • Light does not turn on:
    • Check if the power supply is active.
    • Ensure the bulb is correctly screwed into the lamp holder and is not faulty.
    • Verify that the lamp holder is securely screwed into the main lamp base.
    • Confirm that there is motion within the sensing range.
  • Light stays on continuously:
    • Check for continuous motion within the sensing area.
    • Ensure there are no heat sources or air currents (e.g., from vents) that might trigger the sensor.
    • Verify that the ambient light conditions are not too low, which might keep the sensor active.
  • Light turns off too quickly/slowly:
    • The delay time is fixed (approximately 30 seconds after motion ceases). This is a characteristic of the product.

6. Specifications

Parameter Value
Product Name Radar sensor light head
Model Number E27 Radar Induction Lamp Holder
Input Voltage AC85-265V
Output Voltage AC85-265V
Output Power ≤100W
Standby Power Approximately 0.3W
Sensing Distance 3-8 meters
Sensing Angle 360°
Working Temperature -20~40℃
Supported Bulb Types LED≤100W, Energy-saving lamp≤100W
Lamp Port Model E27
Base Material ABS
Certification CE
Dimensions (Length x Width) 90mm (3.54in) x 60mm (2.36in)
Dimensions and specifications of the radar sensor light head
Detailed dimensions and key specifications of the E27 Radar Induction Lamp Holder.
Compatibility with various E27 bulb types
Diagram illustrating the compatibility of the E27 Radar Induction Lamp Holder with different E27 bulb types, including incandescent, corn, LED, energy-saving, ball, and saucer lamps.

7. Warranty and Support

This product is covered by a standard warranty for the E27 Radar Induction Lamp Holder. For detailed warranty information or technical support, please refer to the official product documentation or contact the seller.

A comprehensive user manual in PDF format may be available for further reference: View User Manual (PDF)

8. User Tips

  • The automatic shut-off delay is fixed at approximately 30 seconds. This is generally sufficient for most common uses like hallways or closets.
  • For optimal performance, install the lamp holder in areas where its 360-degree sensing angle can cover the desired space without significant obstructions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.