1. Introduction
Thank you for choosing the Midea Robot Aspirador VCR20B. This intelligent robot vacuum cleaner is designed to provide efficient and convenient cleaning for your home. Featuring smart navigation, multiple cleaning modes, powerful suction, and automatic charging, it is ideal for maintaining clean floors, especially for homes with pets. Please read this manual thoroughly before using the product to ensure safe and optimal operation.
2. Safety Information
- This appliance is for indoor use only. Do not use it outdoors or on wet surfaces.
- Do not allow children to operate the robot vacuum. Supervise children and pets when the robot is operating.
- Use only the original power adapter and charging station provided by the manufacturer.
- Ensure the power cord is not damaged or tangled. Keep it away from hot surfaces.
- Remove any loose cables, small objects, or fragile items from the floor before cleaning to prevent entanglement or damage.
- Do not use the robot vacuum to pick up large debris, liquids, burning or smoking objects (e.g., cigarettes, hot ashes).
- Do not sit on the robot vacuum or place heavy objects on it.
- Turn off the robot and unplug the charging station before performing any maintenance or cleaning.
3. Package Contents
Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, please contact customer support.
- Midea Robot Vacuum Cleaner
- Charging Station
- Power Adapter
- Remote Control
- Side Brushes (2 pairs)
- Mop Pad
- Virtual Wall Strip
- HEPA Filter (pre-installed or spare)

4. Product Overview
Familiarize yourself with the main parts of your Midea Robot Aspirador VCR20B.
4.1 Robot Vacuum Top View

- Power Button: Press to start/pause cleaning. Long press to turn on/off.
- Press for Brush Roll Release: Button to release the main brush roll for cleaning.
- Dust Cup Release: Button to detach the dust cup for emptying.
4.2 Robot Vacuum Side View

The robot's low profile (80mm height) allows it to easily clean under most furniture.
5. Setup
5.1 Install Side Brushes
Snap the side brushes onto the posts located on the bottom of the robot until they click into place. Ensure they are securely attached.
5.2 Place the Charging Station
- Place the charging station against a wall in an open, uncluttered area.
- Ensure there is at least 0.5 meters (1.6 feet) of clear space on either side of the charging station and 1.5 meters (5 feet) in front of it.
- Plug the power adapter into the charging station and then into a wall outlet.
5.3 Initial Charging
Place the robot vacuum onto the charging station. Ensure the charging contacts on the robot align with those on the station. The indicator light on the robot will show charging status. Fully charge the robot before its first use (approximately 4-5 hours).
5.4 Virtual Wall Setup
Use the provided virtual wall strip to create boundaries that the robot should not cross. Place the strip flat on the floor in areas you want to restrict, such as pet feeding areas or delicate furniture zones.
6. Operating Instructions
6.1 Starting/Pausing Cleaning
- To Start: Press the power button on the robot or the 'Start' button on the remote control. The robot will begin cleaning in its default mode.
- To Pause: Press the power button on the robot or the 'Pause' button on the remote control during operation.
6.2 Cleaning Modes
The Midea VCR20B offers 3 cleaning modes to suit different needs:
- Auto Cleaning: The robot intelligently navigates and cleans the entire floor area.
- Spot Cleaning: Focuses on a specific dirty area, cleaning in a spiral pattern.
- Edge Cleaning: Cleans along walls and furniture edges.
Select your desired mode using the remote control.

6.3 Automatic Charging
When the battery level is low, the robot will automatically return to its charging station. You can also send the robot back to the charging station manually by pressing the 'Home' button on the remote control.
6.4 Remote Control Usage
The remote control allows you to:
- Start/Pause cleaning.
- Select cleaning modes.
- Manually steer the robot.
- Send the robot back to the charging station.
- Adjust suction power (3 levels available).
6.5 Quiet Operation
The Midea VCR20B is designed for quiet operation, ensuring it does not disturb your peace, even when cleaning near sleeping areas.

7. Cleaning and Maintenance
Regular maintenance ensures your robot vacuum operates at peak performance.
7.1 Emptying the Dust Cup
The 'Easy Take & Easy-Empty' design allows for quick and hygienic disposal of collected debris. Press the dust cup release button, remove the dust cup, open its lid, and empty the contents into a trash bin. Rinse the dust cup with water if necessary, and ensure it is completely dry before re-installing.
7.2 Cleaning the HEPA Filter
Remove the HEPA filter from the dust cup. Tap it gently to remove dust. Do not wash the HEPA filter with water unless specified by the manufacturer, as it may damage the filter material. Replace the HEPA filter every 3-6 months, depending on usage.
7.3 Cleaning Side Brushes and Main Brush Roll
- Side Brushes: Pull the side brushes off their posts. Use a small brush or cloth to remove any hair or debris. Re-install them after cleaning.
- Main Brush Roll: Press the brush roll release button to remove the main brush cover and then the brush roll. Use the cleaning tool (if provided) to cut and remove tangled hair or debris. Re-install the brush roll and cover securely.
7.4 Cleaning Sensors
Wipe the cliff sensors (located on the bottom of the robot) and the bumper sensors (on the front bumper) with a clean, dry cloth to ensure they function correctly and prevent the robot from falling or bumping into obstacles.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on | Low battery; Power button not pressed correctly | Charge the robot; Long press the power button to turn on. |
| Robot does not charge | Charging contacts dirty; Charging station unplugged; Robot not aligned | Clean charging contacts; Ensure charging station is plugged in; Re-position robot on station. |
| Poor suction power | Dust cup full; Filter clogged; Main brush tangled | Empty dust cup; Clean/replace filter; Clean main brush. |
| Robot gets stuck frequently | Obstacles on floor; Cliff sensors dirty | Clear floor of clutter; Clean cliff sensors. |
| Robot does not follow virtual wall | Virtual wall strip misplaced or damaged | Ensure virtual wall strip is flat and correctly positioned. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | Midea |
| Model Name | VCR20B (M3S) |
| Color | Black |
| Special Feature | Wireless Charging Station (Auto-Return) |
| Filter Type | HEPA |
| Battery Life | Up to 100 Minutes |
| Power Source | Battery |
| Control Method | Remote Control |
| Form Factor | Round |
| Suction Power | 2000Pa |
| Battery Capacity | 2600mAh |
| Cleaning Modes | 3 |
| Height | 80mm |
10. User Tips
- For optimal pet hair removal, ensure the dustbin is emptied regularly and the main brush is free of tangles.
- If the robot frequently gets stuck, consider using the virtual wall strips to block off problematic areas or rearrange furniture.
- Schedule regular cleaning times using the remote control to maintain consistent floor cleanliness without daily intervention.
- Periodically check and clean all sensors to ensure the robot's navigation remains accurate.
11. Warranty and Support
Midea provides a limited warranty for this product. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact Midea customer service directly. Please have your model number (VCR20B) and purchase information ready when contacting support.