1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Runxin F67Q1 55504 and F67Q3 55604 automatic filter valve controllers. These controllers are designed to automate the filtration and regeneration processes in various water treatment systems, ensuring optimal performance and longevity of your filter media. This product falls under the category of Electrical DIY Supplies.
The F67Q1 and F67Q3 models feature an integrated main control board and display, a four-digit digital tube display, interlock and signal output functions, and power-off data memory, making them reliable and user-friendly for household and industrial applications.
Video: Overview of the Runxin Automatic Filter Valve Controller.
2. Key Features
- Integrated Design: Main control board and display board are combined into a single unit for streamlined operation.
- Digital Display: Features a clear four-digit digital tube display for easy monitoring of operational status and parameters.
- Interlock & Signal Output: Equipped with interlock and signal output functions for enhanced system integration and safety.
- Power-off Memory: Retains data and settings even during power outages, ensuring continuous operation without reprogramming.
- Versatile Application: Suitable for household filtration systems, activated carbon filters for reverse osmosis pretreatment, and various sand filters.
Image: Detailed table of product features and technical parameters.
3. Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 55504 (F67Q1) |
| Flow Type Model | 55604 (F67Q3) |
| Installation Method | Top-mounted |
| Inlet/Outlet Port | 1"F (Female Thread) |
| Drain Port | 1"F (Female Thread) |
| Installation Direction | Right in, Left out |
| Base Connection | 2.5"-8NPSM (Tank Opening) |
| Central Pipe | 1.05" OD (Outer Diameter) |
| Water Production Capacity | 4 m³/h |
| Applicable Tank Size | 6"-12" |
| Working Pressure | 0.15-0.6 MPa |
| Inlet Water Temperature | 5-50°C |
| Inlet Water Turbidity | <20 FTU |
| Adapter Power Supply | Input AC100~240V/50~60Hz, Output DC12V/1.5A |
Note: F-Female thread, M-Male thread, OD-Outer diameter, D-GB represents national standard nominal diameter.
Image: Side view of the valve controller.
Image: Bottom view of the valve controller, highlighting connection threads.
4. Installation and Setup
The Runxin automatic filter valve controller is designed for top-mounted installation on compatible filter tanks. Ensure all connections are secure and watertight before operation.
4.1 Pre-installation Checks
- Verify that the filter tank opening matches the 2.5"-8NPSM base connection of the valve.
- Ensure the central pipe has a 1.05" outer diameter.
- Confirm that the inlet/outlet and drain ports are compatible with 1"F connections.
- Check the power supply requirements: Input AC100~240V/50~60Hz, Output DC12V/1.5A.
4.2 Installation Steps
- Carefully mount the valve controller onto the top of the filter tank, ensuring the central pipe aligns correctly.
- Secure the base connection firmly to prevent leaks.
- Connect the water inlet to the right-side port and the water outlet to the left-side port, following the "Right in, Left out" direction.
- Connect the drain line to the designated drain port.
- Ensure all plumbing connections are sealed properly using appropriate thread sealant.
- Connect the DC12V/1.5A power adapter to the controller and then to a suitable AC power source.
Image: Side view of the valve controller, illustrating connection points.
5. Operating Instructions
The control panel allows you to monitor the system status and adjust parameters. Refer to the control panel diagram for button identification and display indicators.
Image: Control panel diagram with translated labels for F67Q1 and F67Q3 models.
5.1 Control Panel Overview
- Digital Display: Shows current time, regeneration time, or running days.
- Indicators:
- Flashing: Current Time
- Steady: Regeneration Time (F68Q1/F116Q1) or Query Status (F67Q1)
- Flashing: Key Locked
- Buttons:
- Menu/Confirm (菜单 确认): Used to navigate menus and confirm selections.
- Manual/Return (手动 返回): Used for manual operations or returning to previous screens.
- Down (向下): Decreases values or moves down in menus.
- Up (向上): Increases values or moves up in menus.
5.2 Display Modes (F68Q1 / F116Q1)
- 1 - Display Running (表示运行): Indicates normal operation.
- 2 - Display Backwash (表示反洗): Indicates the backwash cycle.
- 3 - Display Brine Suction (表示吸盐): Indicates the brine suction cycle.
- 4 - Display Refill (表示补水): Indicates the refill cycle.
- 5 - Display Rinse (表示正洗): Indicates the rinse cycle.
5.3 Display Modes (F67Q1)
- 1 - Display Running (表示运行): Indicates normal operation.
- 2 - Display Backwash (表示反洗): Indicates the backwash cycle.
- 3 - Display Rinse (表示正洗): Indicates the rinse cycle.
5.4 Unlocking and Parameter Setting
- To unlock the keys, press the Up (▲) and Down (▼) buttons simultaneously for 5 seconds.
- After unlocking, press the Menu/Confirm (确认) button to enter the query status mode.
- Press the Menu/Confirm (确认) button again to enter the parameter setting status mode. Use the Up and Down buttons to adjust values and Confirm to save.
The display also shows "Running Days" (运行天数) on the right side, indicating the number of days the system has been operational since the last reset or regeneration.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Runxin automatic filter valve controller.
6.1 Routine Checks
- Periodically inspect all plumbing connections for leaks.
- Ensure the power adapter and cable are in good condition and free from damage.
- Check the filter media according to its specific maintenance schedule.
- Keep the control panel clean and free from dust and moisture.
6.2 Cleaning
- Wipe the exterior of the controller with a soft, damp cloth.
- Do not use abrasive cleaners or solvents, as they may damage the plastic housing or display.
6.3 Power-off Data Memory
The controller features power-off data memory, meaning your settings will be retained even if power is interrupted. However, for extended periods of non-use, it is advisable to disconnect the power supply.
7. Troubleshooting
This section addresses common issues you might encounter with your Runxin automatic filter valve controller.
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller not powering on | No power supply; faulty adapter; loose connection. | Check power outlet, adapter, and connections. Ensure DC12V/1.5A adapter is used. |
| Display is blank or erratic | Power issue; internal fault. | Verify power. If problem persists, contact support. |
| Keys are unresponsive (flashing indicator) | Keypad is locked. | Press Up (▲) and Down (▼) buttons simultaneously for 5 seconds to unlock. |
| Valve not regenerating or cycling correctly | Incorrect programming; mechanical obstruction; low water pressure. | Check programmed settings. Inspect valve for debris. Ensure adequate water pressure (0.15-0.6 MPa). |
| Water leakage from connections | Loose fittings; damaged seals; improper thread sealant. | Tighten connections. Inspect and replace seals if necessary. Reapply thread sealant. |
8. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase records for any warranty claims.
Ensure to provide the product model (F67Q1 55504 or F67Q3 55604) and a detailed description of the issue when seeking support.