1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your Camecho Car Radio Multimedia Player, designed specifically for Ford Ecosport models from 2013 to 2017. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Camecho Car Radio Multimedia Player installed in a Ford Ecosport dashboard.
2. Safety Information
- Ensure the vehicle's ignition is off and the battery is disconnected before installation to prevent electrical shorts and damage.
- Professional installation is recommended for optimal performance and safety.
- Do not operate the device in a way that distracts you from driving.
- Keep the device away from water and extreme temperatures.
- Only use accessories specified by the manufacturer.
3. Package Contents
Verify that all items are present in the package:
Image: Components included in the package.
- Main Unit (Machine)
- Installation Frame
- Power Cable
- RCA Cable
- GPS Antenna
- 4G Module (Only for S6 Version)
- USB Cable (Double USB interface)
- Rear Camera Input Cable
- Installation Tool
- Canbus Decoder (if applicable for your vehicle model)
4. Setup and Installation
4.1 Pre-Installation Checks
Before proceeding with installation, please confirm the following:
- Vehicle Compatibility: This car radio is designed for Ford Ecosport models from 2013 to 2017.
- Original System:
- The wiring harness provided may not work with vehicles equipped with premium factory sound systems (e.g., BOSE, amplified sound systems, Onstar). Verify your vehicle's original sound system specifications.
- If your car connector has been refitted, or if you have a factory camera or amplifier, contact the seller before purchasing/installing.
- SYNC Function:
Image: Wiring for SYNC function connection.
- If the original vehicle is equipped with the SYNC function, the dedicated SYNC interface needs to be connected.
- If the original vehicle does not have the SYNC function, the separate power interface does not need to be connected as it has no other function or purpose.
4.2 Installation Steps
Professional installation is highly recommended. The general steps are as follows:
- Disconnect Battery: Turn off the vehicle and disconnect the negative terminal of the car battery.
- Remove Original Radio: Carefully remove the original car radio and dashboard trim. Refer to your vehicle's service manual for specific instructions.
- Install Frame: Mount the new installation frame into the dashboard opening.
- Connect Wiring:
- Connect the power cable, RCA cable, GPS antenna, and other necessary cables to the main unit.
- Connect the Canbus decoder (if included and required for your vehicle) to integrate with vehicle controls.
- Connect the 4G module if you have the S6 version and intend to use 4G connectivity.
- Connect the rear camera input cable if you are installing a reversing camera.
- Pay close attention to the SYNC function wiring as described in section 4.1.
- Mount Main Unit: Securely install the Camecho main unit into the frame.
- Test Connections: Before fully reassembling the dashboard, reconnect the car battery and perform a basic function test (power on, radio, touch screen response).
- Reassemble Dashboard: Once confirmed working, reassemble the dashboard trim.
Image: Visual comparison of the dashboard before and after the Camecho Car Radio installation.
4.3 Product Dimensions
Ensure the product dimensions are compatible with your vehicle's dashboard opening.
Image: Product dimensions for the 9-inch unit and frame.
5. Operating Instructions
5.1 Basic Operation
- Power On/Off: Press and hold the power button (usually on the left side of the unit) to turn the device on or off.
- Touch Screen: The 9-inch HD touch screen (1024*600 or 1280*720 resolution) allows for intuitive control. Tap icons to open applications, swipe to navigate.
- Home Screen: Customize your home page by selecting which apps to display and rearranging icons.
5.2 Key Features
5.2.1 Android System
The device runs on an Android operating system, providing access to a wide range of applications and features. Navigate through the interface similar to an Android tablet.
Image: Examples of UI interfaces across different models.
5.2.2 Wireless CarPlay & Android Auto
Connect your iPhone or Android smartphone wirelessly to access navigation, music, messages, and more directly on the car radio display. Use voice commands for hands-free operation.
Image: Wireless CarPlay and Android Auto interfaces.
5.2.3 Mirror Link
Project your smartphone's screen onto the car radio display. iOS supports one-way projection, while Android supports two-way connection, allowing control from the car radio.
Image: Mirror Link connection for iOS and Android devices.
5.2.4 GPS Navigation
Utilize the built-in GPS module for accurate navigation. Supports online and offline maps (requires internet for data download). Compatible with popular navigation apps like Waze, Navitel, IGO, Amap, Yandex, and Sygic.
Image: GPS Navigation interface with supported apps.
5.2.5 FM/RDS Radio
Access FM radio stations with clear sound quality. RDS (Radio Data System) provides additional information like station name and song title where available.
Image: FM/RDS Radio interface.
5.2.6 Bluetooth 5.0
Pair your smartphone or other Bluetooth-enabled devices for hands-free calling, contact synchronization, call recording, and wireless music streaming.
Image: Bluetooth interface for calls and music.
5.2.7 Built-in WIFI & 4G Network (S6 Version)
Connect to the internet via Wi-Fi hotspot or, for S6 versions, insert a 4G SIM card for direct cellular data access. This enables web browsing, online content streaming, and app downloads.
Image: Wi-Fi and 4G network capabilities, including SIM card slot for S6.
5.2.8 Split Screen Function
Run two applications simultaneously on the screen. You can adjust the size and position of each app and switch between them with a swipe gesture.
Image: Split screen functionality displaying two applications.
5.2.9 Steering Wheel Control
The device supports learning functions for your original car's steering wheel buttons, allowing you to control various functions conveniently without taking your hands off the wheel.
Image: Steering wheel control setup interface.
To set up steering wheel controls:
- Access the "Steering Wheel Control" settings in the device menu.
- Follow the on-screen instructions to map your vehicle's steering wheel buttons to the desired functions (e.g., volume up/down, next/previous track, answer/hang up call).
- Press "Save" once all desired functions are mapped.
5.2.10 Vehicle Dedicated DSP & EQ
The powerful DSP chip supports EQ adjustments, allowing you to fine-tune sound frequencies for an optimal audio experience. Features include 3D optimized, 5.1 Panorama, and HiFi scene settings.
Image: DSP and EQ adjustment interface.
5.2.11 Optional Accessories
- Reversing Camera (AHD/CVBS): Connect a rear view camera to display the rear view on the screen when reversing, aiding in safe parking.
- Driving Recorder (ADAS DVR): Supports ADAS DVR with built-in assisted driving technologies. Insert a TF memory card to record video.
- External Microphone: Improve voice quality during calls.
- OBD II / DAB+: Additional optional accessories for enhanced functionality.
Image: ADAS DVR features.
Image: AHD Rear View Camera functionality.
6. Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to clean the touch screen. Do not use abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can usually be found in the system settings or on the manufacturer's website.
- General Care: Keep the unit free from dust and debris. Avoid exposing it to direct sunlight for extended periods or extreme temperatures.
7. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Loose power connection, blown fuse, vehicle battery issue. | Check power cable connections. Inspect vehicle fuses. Ensure car battery is charged. |
| No sound. | Volume too low, mute activated, incorrect audio output settings, speaker wiring issue. | Increase volume. Check if mute is on. Verify audio settings. Inspect speaker wiring. |
| Touch screen unresponsive. | Software glitch, screen damage. | Restart the device. If problem persists, contact support. |
| GPS not acquiring signal. | GPS antenna not properly connected or obstructed. | Ensure GPS antenna is securely connected and has a clear view of the sky. |
| Bluetooth connection issues. | Device not in pairing mode, incorrect pairing code, interference. | Ensure both devices are in pairing mode. Re-enter pairing code. Move closer to the device. |
| CarPlay/Android Auto not connecting. | Phone compatibility, incorrect settings, cable issue (if wired). | Ensure your phone is compatible. Check settings on both phone and car radio. Try restarting both devices. |
8. Specifications
The Camecho Car Radio Multimedia Player comes in several configurations. Please refer to the table below for detailed specifications based on the model variant (S1, S2, S3/S5, S4, S6).
Image: Model comparison and specifications table.
| Feature | S1 | S2 | S3/S5 | S4 | S6 |
|---|---|---|---|---|---|
| Chipset | MT8163 | RK3326S | 8257 | SM4250 Qualcomm Snapdragon | 8581 |
| Core | 4Core 1.3GHz | 4Core 1.5GHz | 4Core+4Core 2.0GHz | 8Core 1.8GHz | 8Core 1.8GHz |
| RAM & ROM | 2GB+64GB | 4GB+64GB | 4GB+64GB / 6GB+128GB | 4GB+64GB | 4GB+64GB |
| Cooling Fan | No | No | No | Yes | No |
| Internet | WiFi | WiFi | WiFi | WiFi | 4G (SIM Card) |
| CarPlay | Wireless | Wireless | Wired/Wireless | Wireless | Wireless |
| Android Auto | Wireless | Wireless | Wired/Wireless | Wireless | Wireless |
| Mirrorlink | Yes | Yes | Yes | Yes | Yes |
| Resolution | 1024*600 | 1280*720 | 1280*720 | 1280*720 | 1280*720 |
| RDS | Yes | Yes | Yes | Yes | Yes |
| 360° Camera | No | No | No | No | No |
| Reversing Input | AHD720&CVBS | AHD720&CVBS | AHD720&CVBS | AHD720&CVBS | AHD720&CVBS |
| Radio Chip Amplifier | 7388 | 7388 | 7388 | 7315 | 7388 |
| Split Screen | Yes | Yes | Yes | Yes | Yes |
| AV-OUT | No | No | No | No | No |
| Support Optional | OBD II / DVR / External Mic / DAB+ / Rear Camera | ||||
General Specifications:
- System: Android
- Power Output: 4*45W
- Bluetooth Version: 5.0
- Work Temperature: -20℃ to 75℃
- Steering Wheel Control Function: Support
- Radio Band: FM/RDS
- External Microphone: Support
- Maps: Built-in offline maps (requires internet to download data)
- WIFI: Support
- USB: Double USB interface
- Audio Format Support: APE/FLAC/WAV/MP3/WMA etc.
- Video Format Support: MKV/RMVB/AVI/MP4/MDV etc.
- Picture Format Support: PNG/JPEG/JPG/GIF/WBMP/BNP etc.
- Voltage: 12 V
- Item Weight: 1.65 kg
- Certification: CE
- OSD Language: Irish, Bulgarian, Polish, Danish, German, French, Dutch, Czech, Romanian, Portuguese, Swedish, Slovenian, Spanish, Hungarian, English
9. User Tips
- Optimize Performance: Close unused applications to free up RAM and improve overall system responsiveness.
- Offline Maps: Download offline maps for your frequently traveled areas to ensure navigation even without an internet connection.
- Customization: Explore the various settings to customize the UI, sound profiles (DSP/EQ), and app display to suit your preferences.
- Regular Cleaning: Wipe the screen regularly with a soft cloth to maintain touch sensitivity and clarity.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
The product is CE certified.
