1. Introduction
The KAIWEETS KEMF-1 is a portable, high-precision EMF (Electromagnetic Field) radiation detector designed to measure electric fields (EF), magnetic fields (MF), and radio frequency (RF) radiation simultaneously. Featuring a clear LED display, Type-C charging, and an intelligent alarm system, it provides real-time monitoring of electromagnetic radiation levels in your environment. This manual provides detailed instructions for the safe and effective use of your KEMF-1 detector.
2. Package Contents
Upon opening the package, please verify that all the following items are included:
- 1 x KAIWEETS KEMF-1 EMF Radiation Detector
- 1 x USB Type-C Charging Cable
- 1 x User Manual (this document)
- 1 x Carrying Case (as shown in product images)
3. Device Overview and Controls
Familiarize yourself with the KEMF-1's display and control buttons:
- Sensor Area: Top part of the device where sensors are located.
- ⏻ Power Button: Press and hold to turn the device ON/OFF.
- HOLD uT/mG Button: Press to hold the current reading on the display. Press again to release. Also used to switch between µT and mG units for magnetic field measurement.
- FUNC Button: Used to cycle through different display modes or functions.
- PEAK MAX Button: Press to display the peak or maximum measured value. Press again to return to real-time readings.
- 🔊/🔇 Button: Toggles the sound alarm ON/OFF.
- LED Display: Shows EF, MF, and RF values, battery status, alarm indicators, and trend graphs.
4. Setup and Charging
4.1 Initial Charging
Before first use, or when the battery indicator shows low power, charge the device using the provided Type-C USB cable.
- Connect the Type-C end of the charging cable to the charging port on the side of the KEMF-1 detector.
- Connect the USB-A end of the cable to a standard USB power adapter (5V/1A recommended) or a computer USB port.
- The battery icon on the display will indicate charging status.
- A full charge typically takes a few hours. The device is ready for use once fully charged.
4.2 Powering On/Off
Press and hold the ⏻ Power Button for approximately 2-3 seconds to turn the device ON or OFF.
5. Operating Instructions
5.1 3-in-1 Measurement
The KEMF-1 simultaneously measures and displays three types of electromagnetic radiation:
- EF (Electric Field): Measured in Volts per meter (V/m).
- MF (Magnetic Field): Measured in microteslas (µT) or milligauss (mG).
- RF (Radio Frequency): Measured in milliwatts per square meter (mW/m²).
5.2 Display Interpretation
The LED display provides real-time readings and visual indicators:
- Numerical Values: Direct readings for EF, MF, and RF.
- Trend Graphs: Visual representation of radiation levels, often color-coded (e.g., green for safe, yellow for caution, red for over-limit).
- Battery Indicator: Shows current battery level.
- Alarm Indicator: A bell icon or similar symbol indicates if the sound alarm is active.
- Unit Indicators: Displays the current units for each measurement (V/m, µT/mG, mW/m²).
5.3 Taking Measurements
To get accurate readings, position the detector appropriately:
- Electric Field (EF) & Radio Frequency (RF): These measurements are uniaxial. Point the top "Sensor Area" of the device directly towards the source you wish to measure for the most precise data.
- Magnetic Field (MF): This measurement is triaxial, meaning it can detect magnetic fields from any direction. You do not need to orient the device in a specific way for MF readings.
Examples of common measurement scenarios:
- EF (Electric Field): Measure near laptops, power lines, or electrical outlets.
- MF (Magnetic Field): Measure near microwave ovens, washing machines, refrigerators, or other large appliances.
- RF (Radio Frequency): Measure near Wi-Fi routers, cell phones, smart meters, or broadcast antennas.
5.4 Using Control Buttons
- HOLD uT/mG:
- Short press: Freezes the current readings on the display. Press again to resume live readings.
- Long press: Switches the magnetic field unit between microteslas (µT) and milligauss (mG).
- FUNC: Press this button to cycle through different display modes or to access specific functions if available (refer to the on-screen prompts).
- PEAK MAX: Press to capture and display the highest (peak/maximum) radiation value detected since the last reset or power-on. Press again to return to real-time measurement.
- Sound Alarm ON/OFF: Press the 🔊/🔇 button to toggle the audible alarm. When radiation levels exceed the preset safety threshold, the device will emit a sound if the alarm is enabled.
5.5 Intelligent Alarm Reminder
The KEMF-1 features an intelligent alarm system. When detected radiation levels for any of the three fields (EF, MF, RF) exceed the built-in safety thresholds, the device will:
- Emit an audible alarm (if enabled).
- Provide a visual alert on the LED display, often by changing the color of the trend graph or displaying an "OVER" indicator.
This helps you quickly identify areas with potentially high radiation exposure.
5.6 Auto Power Off
To conserve battery life, the KEMF-1 detector will automatically power off after approximately 15 minutes of inactivity.
6. Maintenance
6.1 Cleaning
To maintain the accuracy and longevity of your device:
- Wipe the exterior of the detector with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or corrosive chemicals.
- Avoid getting moisture into the device's openings.
6.2 Storage
When not in use for extended periods:
- Store the device in its carrying case to protect it from dust and physical damage.
- Keep it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the battery is partially charged (around 50%) before long-term storage to preserve battery health.
7. Troubleshooting
- Device does not turn on:
- Ensure the battery is sufficiently charged. Connect the device to a power source using the Type-C cable and try again after a few minutes.
- Confirm you are pressing and holding the power button for 2-3 seconds.
- Inaccurate or fluctuating readings:
- Ensure there are no strong electromagnetic sources directly interfering with the device during measurement (e.g., holding it too close to a powerful magnet or high-voltage line).
- Verify the device is held correctly, especially for uniaxial EF and RF measurements (top sensor area pointed at the source).
- Check the operating environment conditions (temperature, humidity) are within specified limits.
- Alarm sounds frequently:
- This indicates high radiation levels. Move away from the source or investigate the source of the radiation.
- If you wish to disable the audible alarm, press the 🔊/🔇 button.
8. Specifications
| Category | Detail |
|---|---|
| General |
Brand: KAIWEETS Type: EMF Radiation Detector Model: KEMF-1 Color: Black |
| Magnetic Field (MF) |
Measuring range: 0.01 - 200.0 µT / 0.1 - 2000 mG Range: 20 µT / 200 µT, 200 mG / 2000 mG Resolution: 0.01 / 0.1 µT, 0.1 / 1 mG Frequency range: 30 - 1000 Hz Accuracy: ±5% |
| Electric Field (EF) |
Measuring range: 1 - 2000 V/m Range: 2000 V/m Resolution: 1 V/m Frequency range: 30 - 1000 Hz Accuracy: ±10% |
| Radio Frequency (RF) |
Measuring range: 0.001 - 200.0 mW/m² Range: 2 / 20 / 200 mW/m² Resolution: 0.001 / 0.01 / 0.1 mW/m² Frequency range: 50 MHz - 3.5 GHz Accuracy: ±20% |
| Alarm | Sound and light alarm exceeding the built-in threshold |
| Auto Power Off | Approx. 15 minutes of inactivity |
| Use Environment | 0 - 40°C / 40 - 80% RH |
| Power | 3.7V Lithium battery |
| Charging | Type-C / 5V / 1A |
| Product Weight | 0.3 kg |
| Package Size (L x W x H) | 17.5 x 9.8 x 5.5 cm |
9. User Tips
- Optimal Positioning: For EF and RF measurements, remember to point the top sensor area directly at the suspected source for the most accurate readings. Magnetic fields are triaxial, so orientation is less critical for MF.
- Environmental Awareness: Be aware that common household appliances and electronic devices emit varying levels of EMF. Use the detector to identify and understand these sources in your environment.
- "Ghost Hunting" Use: While primarily a scientific instrument, the KEMF-1 can be used for recreational "ghost hunting" activities, as electromagnetic anomalies are sometimes associated with paranormal claims.
- Regular Charging: Although the device has a 15-minute auto-off feature, it's good practice to charge it regularly, especially before extended use, to ensure consistent performance.
10. Warranty and Support
For warranty information, technical support, or any inquiries regarding your KAIWEETS KEMF-1 detector, please refer to the contact information provided by your retailer or visit the official KAIWEETS website. Keep your purchase receipt as proof of purchase for warranty claims.