Introduction
The TKLBLS P4 is a versatile 4-channel professional portable mixer designed for various audio applications, including live broadcasts, computer audio mixing, and general entertainment. It features USB lossless playback, OTG direct connection to mobile phones, Bluetooth 5.0 connectivity, and 99 DSP digital effects. This manual provides detailed instructions for setting up, operating, and maintaining your P4 mixer to ensure optimal performance and longevity.
Product Overview and Controls
Familiarize yourself with the various inputs, outputs, and controls on your TKLBLS P4 mixer.

Figure 1: Product Panel Annotations - A detailed diagram labeling all controls and interfaces on the mixer, including Input Interface, Mobile Phone Interface, Main Output, Headphone Jack, 48V Phantom Power, Reverb Adjustment, Gain Adjustment, Treble Adjustment, Midrange Adjustment, Bass Adjustment, Balance Adjustment, Multi-function Screen, Effect Selection, Reverb Effect, Volume Fader, Power Button, and Power Interface.
Key Controls and Interfaces:
- Input Interface (MIC/LINE): For connecting microphones and line-level instruments.
- Mobile Phone Interface: For direct connection to mobile devices.
- Main Output (MAIN OUT): XLR and 6.5mm outputs for connecting to main speakers or amplifiers.
- Headphone Jack (PHONES): 6.5mm output for monitoring audio.
- 48V Phantom Power: Independent switches for channels 1 and 2, providing power for condenser microphones.
- PAD (20dB): Attenuation switch for high-level input signals.
- GAIN Adjustment: Controls the input sensitivity for each channel.
- HPF (High-Pass Filter): Reduces low-frequency rumble.
- EQ Controls (HIGH, MID, LOW): Treble, Midrange, and Bass adjustments for each channel.
- FX Adjustment: Controls the amount of effect sent from each channel.
- PAN/BAL Adjustment: Adjusts the stereo position of the channel signal.
- Multi-function Screen: Displays current mode (USB, Bluetooth, DSP effect number).
- MODE Button: Toggles between USB, Bluetooth, and other modes.
- Effect Selection (PROGRAM): Rotary knob to select DSP effects.
- Reverb Effect (FX): Controls the overall level of the selected effect.
- Volume Fader (MAIN): Controls the overall output volume.
- Power Button (ON/OFF): Turns the mixer on or off.
- Power Interface (DC 12V): Connects to the 12V power supply.
Setup Instructions
Follow these steps to set up your TKLBLS P4 mixer.
1. Power Connection
- Ensure the mixer's power button is in the OFF position.
- Connect the provided 12V power supply to the DC 12V power interface on the mixer.
- Plug the power adapter into a suitable AC power outlet (US Plug type).
2. Connecting Audio Devices
The mixer supports various input and output devices. Refer to the connection diagram below for guidance.

Figure 2: Mixer Connection Diagram - An illustrative guide showing how to connect various devices to the mixer, including wireless microphones, corded microphones, guitar, USB flash drive, computer, cell phone, condenser microphone, active speaker, power amplifier, speaker box, and 12V power supply.
- Microphones:
- For dynamic microphones, connect using a Canon male mono input (XLR) or 6.5mm mono input cable to the MIC/LINE jacks.
- For condenser microphones, connect via Canon male mono input (XLR) and activate the +48V PHANTOM power switch for the respective channel. Ensure the switch is independent for each channel.
- Instruments (e.g., Guitar): Connect using a 6.5mm mono input cable to the MIC/LINE jacks.
- USB Devices: Insert a USB flash drive into the USB port for playback. Connect a computer via the USB 2.0 port for audio interface functionality.
- Mobile Phones: Use an OTG direct connection cable to the USB port for mobile phone audio input/output.
- Output Devices: Connect active speakers or a power amplifier with speaker boxes to the MAIN OUT (XLR or 6.5mm) ports.
- Headphones: Plug headphones into the 6.5mm PHONES jack for monitoring.

Figure 3: Input Section Detail - Detailed view of the mixer's input section, highlighting 48V Phantom power with independent switches, Canon male mono input, and 6.5mm mono input.
Operating Instructions
1. Basic Operation
- After connecting all devices, turn on the mixer using the power button.
- Adjust the GAIN knob for each input channel to an appropriate level. Avoid clipping (distortion).
- Use the HIGH, MID, and LOW EQ knobs to shape the tone of each channel.
- Adjust the channel faders and the MAIN fader to control the overall mix volume.
2. Bluetooth Connection
The P4 mixer features Wireless Bluetooth 5.0 for stable, lossless music streaming.

Figure 4: Bluetooth Connection Guide - Instructions for Wireless Bluetooth 5.0 connection, showing how to press MODE until 'BLUE' appears on the screen, then connect via phone's Bluetooth. Includes an image of a phone connected via Bluetooth.
- Press the MODE button on the mixer until the multi-function screen displays "BLUE".
- On your mobile device, enable Bluetooth and search for available devices.
- Select "TKLBLS P4" (or similar name) from the list to pair and connect.
- Once connected, you can stream audio wirelessly to the mixer.
3. USB Playback and Recording
The mixer supports USB lossless playback and direct OTG connection for mobile phones.

Figure 5: USB Playback/OTG Connection - Diagram showing USB lossless playback and OTG direct connection to mobile phone, with icons for USB flash drive, computer, and cell phone.
- USB Flash Drive: Insert a USB flash drive with audio files into the USB port. Use the playback controls (play/pause, skip) on the mixer to manage audio.
- Computer Connection: Connect the mixer to a computer via the USB 2.0 port. The mixer will function as an audio interface, allowing you to play audio from your computer or record the mixer's output.
- Mobile Phone OTG: Connect your mobile phone directly to the USB port using an OTG cable for direct audio input/output.
4. Digital Signal Processing (DSP) Effects
The P4 mixer includes 99 DSP digital effects to enhance your sound.

Figure 6: DSP Digital Effects - Illustration of 99 DSP Digital Effects available, with instructions to rotate a knob to select effect type and press to confirm. A list of effect categories (HALL, ROOM, DELAY, PING PONG, ECHO, REVERB, KARAOKE, PITCH, CHORUS, TREMOLO, FLANGE, AUTO TUNE) is provided.
- Rotate the PROGRAM knob to browse through the available effect types (00-99).
- Once you find the desired effect, press the PROGRAM knob to confirm your selection.
- Use the FX knob on each channel to send a portion of that channel's signal to the effect processor.
- Adjust the main FX knob to control the overall level of the applied effect.
5. Headphones Monitoring
Monitor your mix with headphones for precise audio control.

Figure 7: Headphones Monitoring - Diagram showing Headphones Lossless Monitoring, indicating a 6.5mm input and volume adjustment knob. An image of headphones connected to the mixer is shown.
- Plug your 6.5mm headphones into the PHONES jack.
- Adjust the dedicated PHONES volume knob to set your monitoring level.
6. Single Channel Reverb Adjustment
Fine-tune the reverb for individual channels to create a balanced stage monitor mix.

Figure 8: Single Channel Reverb Adjustment - Image demonstrating Single Channel Reverb Adjustment, explaining that these knobs adjust a portion of each channel's signal to set up a monitor mix feeding stage monitors, independent of the main mix. Adjust these controls on each channel until the desired stage monitor mix is achieved.
- The MON SEND knobs on each channel allow you to tap a portion of that channel's signal.
- Adjust these controls to create a separate monitor mix, often used for stage monitors, independent of the main output mix.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your mixer.
- Cleaning: Regularly wipe the mixer's surface with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents.
- Storage: When not in use, store the mixer in a cool, dry place away from direct sunlight, extreme temperatures, and excessive dust.
- Cable Management: Ensure all cables are connected securely and are not strained or tangled. Avoid bending cables sharply.
- Ventilation: Do not block the ventilation openings on the mixer to prevent overheating.
- Power Off: Always power off the mixer and disconnect it from the power source when not in use for extended periods or during electrical storms.
Troubleshooting
If you encounter issues with your TKLBLS P4 mixer, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power outlet faulty; Mixer power switch off. | Check power cable connection; Try a different power outlet; Ensure power switch is ON. |
| No sound output | Main output cables disconnected; Main fader or channel faders too low; Connected speakers/amplifier off or faulty. | Check all output connections; Increase MAIN and channel faders; Verify external audio equipment. |
| No microphone input | Microphone not connected; GAIN knob too low; 48V Phantom power not enabled for condenser mics. | Ensure microphone is connected correctly; Increase GAIN; Activate 48V Phantom power if using a condenser mic. |
| Bluetooth not connecting | Mixer not in Bluetooth mode; Device Bluetooth off; Interference. | Press MODE until 'BLUE' is displayed; Ensure Bluetooth is enabled on your device; Try pairing again. |
| Distorted audio | GAIN levels too high; Input signal too strong (PAD needed); Faulty cable. | Reduce GAIN levels; Engage PAD switch for high-level inputs; Try a different cable. |
Specifications
Detailed technical specifications for the TKLBLS P4 mixer.
| Feature | Specification |
|---|---|
| Model Number | P4 |
| Type | Mixers |
| Channels | 4 |
| Frequency Range | 530Mhz-580MHz |
| Power Source | AC (12V DC input) |
| Inbox Adaptor | Yes |
| Plug Type | US Plug |
| Built-in Battery | No |
| Certification | CE |
| Dimensions (L x W x H) | 23.5cm x 19.5cm x 5cm |
| Product Weight | 1.313 kg |
| Package Dimensions (L x W x H) | 36cm x 26cm x 8cm |

Figure 9: Mixer Dimensions - Dimensions of the TKLBLS P4 Mixer: Top view showing length (23.5cm) and width (19.5cm), and side view showing height (5cm).
User Tips
- Easy Bluetooth Pairing: For quick wireless audio, remember to press the 'MODE' button until 'BLUE' appears on the screen before attempting to pair with your mobile device. This ensures the mixer is in discoverable mode.
- Phantom Power for Condenser Mics: Always remember to activate the +48V PHANTOM switch for the specific channel when using a condenser microphone. Dynamic microphones do not require phantom power.
- Gain Staging: Set your GAIN knobs carefully. Start with them low and gradually increase until you get a strong signal without peaking (indicated by the PEAK LED). This prevents distortion and ensures a clean sound.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific terms and conditions or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.