Vexilar Cleanova W11

Contents

Instruction Manual: Cleanova W11 Robot Vacuum Mop Pads and Dust Bags

Essential guide for the maintenance and replacement of your Cleanova W11 Self-Emptying Robot Vacuum accessories.

Product Overview

This kit provides essential replacement accessories for your Cleanova W11 Self-Emptying Robot Vacuum, ensuring continued optimal cleaning performance. It includes 5 microfiber mop pads and 6 high-capacity dust bags, designed for efficient dirt collection and floor mopping.

Five microfiber mop pads and six white dust bags

Figure 1: Complete set of 5 mop pads and 6 dust bags.

Video 1: Product showcase of the mop pads and dust bags.

Setup and Installation

These replacement components are designed for direct and effortless installation, requiring no professional assistance or additional tools. Always ensure your robot vacuum is powered off before attempting any installation or replacement.

Installing Dust Bags

  1. Locate the dustbin compartment on your Cleanova W11 Self-Emptying Robot Vacuum. Refer to your robot vacuum's main instruction manual for specific dustbin access instructions.
  2. Open the dustbin compartment and carefully remove the old, full dust bag.
  3. Unfold a new dust bag and align its opening with the dustbin's intake port. The robust seal on the dust bag ensures a secure fit, preventing dust from escaping.
  4. Gently push the new dust bag into place until it is fully seated.
  5. Close the dustbin compartment securely.
Six individual dust bags

Figure 2: Individual dust bags ready for installation.

Installing Mop Pads

  1. Locate the mopping module or mop pad attachment area on your Cleanova W11 Self-Emptying Robot Vacuum.
  2. Remove the used mop pad.
  3. Attach a clean microfiber mop pad to the designated area. The mop pads are designed to attach seamlessly, typically using a hook-and-loop (Velcro) system.
  4. Ensure the mop pad is securely fastened and lies flat against the mopping module.
A single microfiber mop pad, top view

Figure 3: A single microfiber mop pad.

Operating Instructions

Once the dust bags and mop pads are correctly installed, your Cleanova W11 robot vacuum is ready to operate with enhanced cleaning capabilities.

  • Dust Collection: The clog-free design of the dust bags ensures consistent airflow, allowing your vacuum to efficiently collect dust, dirt, and debris without performance degradation, even as the bag fills.
  • Mopping Function: The microfiber mop pads enable effective and convenient mopping, leaving your floors sparkling clean. For optimal results, ensure the water tank (if applicable to your robot vacuum model) is filled according to your robot vacuum's instructions.

Maintenance

Regular maintenance of your robot vacuum's accessories is crucial for maintaining its cleaning efficiency and extending the lifespan of the components.

Mop Pads

  • After each mopping cycle, remove the mop pad from the robot vacuum.
  • Hand wash or machine wash the microfiber mop pads with mild detergent. Avoid using bleach or harsh chemicals.
  • Air dry the mop pads completely before reattaching them to the vacuum or storing them.
  • Replace mop pads if they show signs of significant wear, tear, or reduced cleaning effectiveness.

Dust Bags

  • Monitor the dust bag level indicator on your robot vacuum (if available) or visually inspect the bag regularly.
  • Replace the dust bag when it is full to maintain optimal suction power and prevent odors.
  • Dispose of used dust bags responsibly. These are single-use items and are not designed for emptying and reuse.
Close-up of mop pad texture and dust bag opening

Figure 4: Detailed view of mop pad and dust bag features.

Troubleshooting

If you experience issues with your robot vacuum's cleaning performance after replacing accessories, consider the following:

  • Reduced Suction: Ensure the dust bag is correctly installed and not overfilled. Check for any blockages in the vacuum's intake path.
  • Ineffective Mopping: Verify the mop pad is clean and securely attached. Ensure the robot vacuum's water tank is filled and dispensing water correctly.
  • Unusual Noises: Double-check that all components, including the dust bag and mop pad, are properly seated and not interfering with moving parts.

For persistent issues, consult your Cleanova W11 Self-Emptying Robot Vacuum's main instruction manual or contact customer support.

Specifications

FeatureDetail
Product NameMop Cloth + Dust Bags Kit
MaterialMicrofiber (mop pads), Cloth (dust bags)
CompatibilityVexilar Cleanova W11 Self-Emptying Robot Vacuum
Mop Pad DimensionsApprox. 285mm (length) x 115mm (width)
Quantity5 Mop Pads, 6 Dust Bags
Package Weight0.25 kg
Package Dimensions10 cm (length) x 5 cm (width) x 3 cm (height)
Mop pad with dimensions 285mm length and 115mm width

Figure 5: Mop pad dimensions.

User Tips

  • For homes with pets or high traffic, consider more frequent replacement of dust bags and washing of mop pads to maintain optimal air quality and cleaning performance.
  • Always have spare dust bags and mop pads on hand to avoid interruptions in your cleaning schedule.
  • Ensure the mop pads are slightly damp (not soaking wet) when starting a mopping cycle for best results on hard floors.

Warranty and Support

For any questions regarding the compatibility, installation, or performance of these replacement parts, please contact the seller directly through your purchase platform. Refer to your original Cleanova W11 Self-Emptying Robot Vacuum manual for warranty information pertaining to the main device.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.