kankeirr 6870C-0805A

Contents

TCON Board for LG TV (Model 6870C-0805A)

Model: 6870C-0805A | Brand: kankeirr

1. Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of the 6870C-0805A V19_UHD_TM120_V0.3 TCON (Timing Controller) board. This board is a critical component responsible for processing video signals and sending them to the display panel, ensuring correct image display on your LG TV.

The TCON board is designed as a replacement part for compatible LG TV models. Please read this manual thoroughly before attempting any installation or repair.

Front view of the 6870C-0805A TCON board, showing its green circuit board, various chips, and connectors. Text on the image indicates '6870C-0805A' and 'For :55"65"'.
Figure 1.1: Front view of the 6870C-0805A TCON Board, compatible with 55" and 65" displays.

2. Specifications

FeatureDetail
Model Number6870C-0805A
Compatible Equipment StyleDisplay Equipment (LG TV)
Compatible Display Sizes55 inch, 65 inch
Board DescriptionV19_UHD_TM120_V0.3
Part Number (P/N)6870C-0805A
Design Date18.05.21
Brand Namekankeirr
OriginMainland China
Approximate Package Dimensions (L x W x H)18 cm x 11 cm x 3 cm
Approximate Package Weight0.1 kg
Back view of the 6870C-0805A TCON board, showing the green circuit board with various solder points and traces.
Figure 2.1: Back view of the TCON Board.

3. Safety Precautions

Working with electronic components, especially inside a television, carries risks. Please observe the following safety guidelines:

  • Disconnect Power: Always ensure the television is unplugged from the power outlet before opening the casing or handling any internal components.
  • Static Electricity: Electronic components are sensitive to electrostatic discharge (ESD). Use an anti-static wrist strap or touch a grounded metal object frequently to discharge static electricity from your body.
  • Professional Installation: Installation of this TCON board should ideally be performed by a qualified technician to prevent damage to the TV or injury.
  • Handle with Care: Avoid touching the surface of the chips and connectors directly. Hold the board by its edges.
  • No Liquids: Keep the board and TV away from liquids and moisture.

4. Installation Guide

This section outlines the general steps for replacing a TCON board. Specific TV models may have variations.

4.1 Pre-installation Checks

  • Verify Compatibility: Before starting, ensure that the model number of this replacement board (6870C-0805A) exactly matches the model number of your original TCON board. Discrepancies can lead to malfunction or damage.
  • Power Off: Unplug the TV from the main power supply.
  • Discharge: Allow the TV to sit for a few minutes after unplugging to ensure all residual power is discharged.
  • Documentation: Take photos of the original board's connections and placement before removal for reference during reassembly.

4.2 Installation Steps

  1. Access the TCON Board: Carefully remove the back panel of your television to expose the internal components. The TCON board is typically located at the top or bottom center of the display panel, often covered by a metal shield.
  2. Disconnect Cables: Gently disconnect all ribbon cables (LVDS cables) and any power connectors attached to the old TCON board. Note their orientation and connection points.
  3. Remove Old Board: Unscrew and carefully remove the faulty TCON board from its mounting points.
  4. Install New Board: Place the new 6870C-0805A TCON board into position, ensuring it aligns correctly with the mounting holes. Secure it with the screws removed earlier.
  5. Connect Ribbon Cables: Reconnect the ribbon cables to the new TCON board. Ensure they are inserted fully and correctly into their respective connectors. Pay close attention to any specific markings or features on the cables or board, such as the 'R125 has resistance + Cable' indication, which may denote a specific cable type or connection requirement.
Close-up of the 6870C-0805A TCON board with two ribbon cables connected. A red circle highlights a component near the R125 marking, and text states 'R125 has resistance + Cable'.
Figure 4.1: TCON Board with ribbon cables, noting 'R125 has resistance + Cable' detail for proper connection.
  1. Connect Power: Reconnect any power cables to the TCON board.
  2. Reassemble TV: Carefully replace the TV's back panel and secure it with screws.
Close-up of the main chip and connectors on the TCON board, showing detailed circuitry and part numbers like 'P/N: 6870C-0805A'.
Figure 4.2: Detailed view of the main chip and connectors on the TCON board.

5. Operating Instructions

After successful installation of the TCON board:

  1. Power On: Plug the television back into the power outlet.
  2. Test Display: Turn on the TV and check for normal display functionality. Verify that the picture is clear, free of distortions, and colors are accurate.
  3. Source Input: Connect a video source (e.g., cable box, DVD player) to confirm proper signal processing.

6. Maintenance

The TCON board itself requires minimal maintenance once installed. To ensure its longevity and optimal performance:

  • Keep Clean: Ensure the interior of the TV remains free of dust and debris, which can accumulate on electronic components and lead to overheating.
  • Avoid Impact: Protect the TV from physical shocks or impacts that could damage internal components.
  • Ventilation: Ensure the TV has adequate ventilation to prevent overheating, which can stress electronic parts.

7. Troubleshooting

If you encounter issues after installing the TCON board, consider the following:

  • No Display or Incorrect Display:
    • Double-check all ribbon cable connections to ensure they are fully seated and correctly oriented.
    • Verify that all power connectors are securely attached.
    • Confirm that the replacement TCON board model matches your original board exactly.
  • Horizontal Stripes on Screen:
    • This issue often indicates a problem with the ribbon cable connections to the display panel or the TCON board itself. Re-seat these cables carefully.
    • Ensure the cables are not damaged or pinched.
    • If the issue persists, it may indicate a deeper compatibility problem or a faulty panel, requiring professional diagnosis.
  • Intermittent Picture: Check for loose connections or signs of overheating on the board.

If troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a professional TV repair technician.

8. User Tips

  • Always verify the model number of your existing TCON board against the replacement board before purchase and installation.
  • Take clear photos of your original board and its connections before removal to serve as a guide during the installation of the new board.
  • Ensure all ribbon cables are securely and correctly connected. Pay particular attention to any specific markings or instructions, such as the 'R125 has resistance + Cable' detail, which can be crucial for proper functionality.
  • Many users have reported that this TCON board works great and correctly when installed properly, leading to satisfactory repairs.

9. Warranty and Support

This product comes with a three-month warranty covering quality problems. If you experience any quality-related issues with the TCON board within this period, please contact the seller for support and assistance.

The seller tests all products before shipment to ensure functionality. If the product is damaged during transportation, please inform the seller immediately upon receipt.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.