1. Introduction
The Tera P90 Plus Terahertz Electromagnetic Foot Health Device is designed to promote overall well-being through the application of terahertz electromagnetic energy. This device aims to supplement energy, improve microcirculation, and activate immunity. It utilizes biological radiofrequency magnetic energy technology to stimulate the body's natural energy flow, enhancing circulation and cellular metabolism.
Key benefits include promoting microcirculation, improving lymphatic function, aiding detoxification and metabolism, regulating human body functions, stimulating cell vitality, activating gonads, improving obesity through internal heat and fat burning, clearing impurities, relieving muscle strain, alleviating joint inflammations, promoting collagen regeneration, and smoothing wrinkles.


2. Setup
- Unpack the Device: Carefully remove the Tera P90 Plus device and all accessories from its packaging.
- Placement: Place the device on a stable, flat surface in a comfortable area where you can sit or stand comfortably during use.
- Connect Power: Locate the power input port on the back of the device. Connect the provided power adapter to the device and then plug it into a suitable electrical outlet.
- Power On: Flip the main power switch located on the back of the device to the 'ON' position. The display on the device should illuminate.

3. Operating Instructions
- Initiate Session: Once the device is powered on, place both your feet (or hands, if preferred) flat and firmly on the metal pads. The device will detect contact and begin operation.
- Adjust Time: The default session time is 30 minutes. You can adjust this using the controls on the device or the remote control.
- Adjust Energy Level: The device typically starts at a low energy level (e.g., '01'). Use the 'Energy+' and 'Energy-' buttons on the device's control panel or the remote control (buttons A and B) to increase or decrease the intensity to your comfort level. The display will show the current energy level.
- Remote Control Functions: The remote control provides convenient access to adjust energy levels (A for Energy+, B for Energy-). Buttons C (MV) and D (MH) may offer additional modes or settings, refer to the device's display for specific indications.
- End Session: The device will automatically turn off after the set time. You can also manually end a session by pressing the 'Start/TBD' button or by removing your feet/hands from the pads.


4. Important Usage Notes
- Ensure full and continuous contact with the metal pads during operation.
- Avoid touching the non-conductive parts or edges of the device's energy boards with your hands or feet during a session.
- For optimal and consistent results, keep both feet (or hands) on the pads throughout the entire session.

5. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth after each use. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from children and pets.
- Inspection: Regularly check the power cord and plug for any signs of damage. If any damage is found, discontinue use and contact customer support.
6. Troubleshooting
- Device Not Turning On: Ensure the power adapter is securely plugged into both the device and a working electrical outlet. Check that the main power switch on the back of the device is in the 'ON' position.
- No Sensation During Use: Ensure your feet (or hands) are making full and firm contact with both metal pads. Increase the energy level gradually using the controls.
- Remote Control Not Working: Check if the remote control's battery needs replacement. Ensure there are no obstructions between the remote and the device's sensor.
- Unusual Noise or Smell: Immediately turn off the device, unplug it from the power outlet, and contact customer support. Do not attempt to repair the device yourself.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Terahertz Megameter/P90 PLUS+ |
| Model Number | P90 Plus |
| Usage Mode | Electric |
| Application | Foot |
| Rated Voltage | 110V / 220V (depending on plug type) |
| Rated Power | 300W / 50HZ |
| Product Dimensions (L x W x H) | 46 cm x 45 cm x 19 cm |
| Product Weight | 4.839 kg |
| Origin | Mainland China |
| Plug Type Options | US Plug, EU Plug, UK Plug, AU Plug |
| Special Features | Rotating magnetic function |

8. User Tips
- Start Gradually: Begin with the lowest energy setting and gradually increase it to find your comfortable and effective level.
- Consistency is Key: Regular use, as recommended, can lead to better results over time.
- Hydration: Ensure you are well-hydrated before and after using the device.
- Comfortable Posture: Sit or stand in a relaxed and comfortable position to maximize the benefits of the session.
Note: No specific user reviews or Q&A were provided for this manual. Tips are based on general best practices for similar devices.
9. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.