1. Introduction
Thank you for choosing the Hatteker 5-D Reciprocating Shaver. This electric shaver is designed to provide a close, comfortable, and efficient shaving experience for men. Featuring an advanced 5-blade system, a clear LCD digital display, and a fully washable design, it offers convenience and performance for both wet and dry shaving. Please read this manual thoroughly before first use to ensure proper operation and maintenance.
2. Product Overview
2.1 Package Contents
- Hatteker 5-D Reciprocating Shaver (Model HT-908)
- Protective Cover
- USB Charging Cable
- Cleaning Brush
- User Manual
2.2 Shaver Components
- 5-Blade Shaving Head: Consists of protective foils and straight razors for efficient stubble and long beard trimming.
- Pop-up Trimmer: Integrated trimmer for precise detailing and shaping.
- Power Button: Controls power on/off and speed modes.
- LCD Digital Display: Shows battery percentage, charging status, and speed mode.
- USB Type-C Charging Port: For convenient charging.
- Ergonomic Body: Heavy-duty full metal body with a slim design for comfortable grip.
3. Specifications
| Attribute | Detail |
|---|---|
| Model Number | HT-908 |
| Blade Material | Stainless steel |
| Razor Type | Mesh, Reciprocating 5-blade System |
| Functions | Wet shave, Dry shaving, Washing under water, Charging indication |
| Nozzle Type | Trimmer nozzle (Pop-up trimmer) |
| Number of Nozzles | 1 - 2 pcs |
| Material | ABS |
| Batteries Included | Yes (ICR18500 1400mAh Li-ion 3.7V) |
| Voltage | Global Universal (100-240V) |
| Rated Voltage | 5V |
| Rated Power | 5W |
| Charging Time | 2 Hours |
| Usage Time | 100 minutes |
| Charging Mode | USB Charging (Type-C) |
| Washing Mode | Whole body washing (IPX6 Waterproof) |
| Features | Five Blade, 2 Speed Modes (6500 RPM, 7000 RPM) |
| Certification | RoHs, CE |
4. Setup
4.1 Initial Charging
Before using your Hatteker Shaver for the first time, ensure it is fully charged. Connect the provided USB Type-C charging cable to the shaver's charging port and plug the other end into a compatible USB power adapter (not included) or a computer USB port. The LCD display will show the charging progress. A full charge takes approximately 2 hours and provides up to 100 minutes of usage time. The display will show "100" when fully charged.
5. Operating Instructions
5.1 Power On/Off and Speed Adjustment
Press the power button once to turn the shaver on. The LCD display will illuminate, showing the current battery level and speed mode. Press the power button again to cycle through the two available speed modes (6500 RPM and 7000 RPM). Press and hold the power button for a few seconds to turn the shaver off.
5.2 Shaving Techniques
The Hatteker Shaver supports both wet and dry shaving. For best results:
- Dry Shaving: Ensure your face is clean and dry. Hold the shaver at a right angle to your skin and move it against the direction of hair growth.
- Wet Shaving: Apply shaving foam or gel to your face. The shaver is IPX6 waterproof, allowing for comfortable use in the shower or with water.
- Gentle on Skin: The shaver is designed with a protective skin guard and flexible blades to minimize pulling, scratches, and irritation.
5.3 Using the Pop-up Trimmer
Slide the trimmer release button (usually located on the back or side of the shaver head) upwards to engage the pop-up trimmer. Use the trimmer for precise shaping of sideburns, mustaches, or for pre-trimming longer hairs before shaving.
6. Maintenance
6.1 Cleaning the Shaver
To maintain optimal performance and hygiene, clean your shaver regularly. The Hatteker Shaver is IPX6 waterproof and can be rinsed directly under running water.
- After each use, turn off the shaver and remove the protective cover.
- Rinse the shaving head thoroughly under warm running water.
- For a more thorough cleaning, you can detach the shaving head (if applicable, refer to specific head removal instructions if provided with your model) and use the included cleaning brush to remove any trapped hairs.
- Allow the shaver head to air dry completely before reattaching the protective cover.
- Do not use abrasive cleaners or harsh chemicals, as these can damage the shaver.
6.2 Blade Replacement
For continued optimal shaving performance, it is recommended to replace the shaving head and blades every 12-18 months, depending on usage. Replacement parts can be purchased from authorized Hatteker retailers.
7. Troubleshooting
- Shaver not turning on:
- Ensure the shaver is fully charged. The LCD display will show "00" and stop discharging when the battery is depleted.
- Check if the power button is being pressed correctly.
- Poor shaving performance / pulling hair:
- Ensure the shaver is fully charged.
- Clean the shaving head thoroughly to remove any trapped hairs or debris.
- Consider replacing the shaving head if it has been in use for an extended period (12-18 months).
- Ensure you are shaving against the direction of hair growth.
- LCD display flashing "10":
- This indicates a low battery level. Recharge the shaver immediately.
8. User Tips
- For a closer shave, stretch your skin slightly with your free hand while shaving.
- If you have sensitive skin, consider using the shaver with shaving cream or gel for a smoother, more comfortable wet shave.
- Always store the shaver with its protective cover on to prevent damage to the foils.
- Regularly clean the shaver after each use to maintain hygiene and prolong its lifespan.
9. Warranty and Support
The Hatteker 5-D Reciprocating Shaver comes with a standard manufacturer's warranty. For detailed warranty information, product support, or to purchase replacement parts, please contact your retailer or visit the official Hatteker website. Keep your proof of purchase for warranty claims.