1. Introduction
Thank you for purchasing the Sailwin SW-B5 Professional Portable DJ Equipment. This 2-piece Gig Bar Kit is designed for DJs and disco enthusiasts, offering vibrant RGBW 4-in-1 LED lighting for various events. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.
2. Safety Instructions
- Always connect the unit to a grounded circuit to avoid the risk of electrocution.
- Ensure the power supply matches the voltage requirements of the device (AC100-240V 50/60Hz).
- Do not expose the unit to rain or moisture to prevent fire or shock hazards.
- Keep the unit away from flammable materials and ensure adequate ventilation.
- Avoid direct eye exposure to the light source, as it can cause eye damage.
- Only qualified personnel should perform installation and servicing.
- Disconnect from power before cleaning or servicing.
3. Package Contents
The Sailwin SW-B5 Gig Bar Kit typically includes:
- 2 x LED Par Bar Stage Lighting Units
- 1 x Tripod Stand
- 1 x Carry Bag (for transport and storage)
- Power Cable(s)
- User Manual (this document)
4. Setup
4.1 Unpacking
Carefully unpack all components and inspect them for any damage. If any damage is found, contact your supplier immediately.
4.2 Assembling the Stand
- Extend the legs of the tripod stand to a stable position.
- Adjust the height of the stand to your desired level, ensuring it is securely locked.
4.3 Mounting the Lighting Bar
- Attach the lighting bar securely to the top of the tripod stand using the provided mounting hardware.
- Ensure all connections are tight and the bar is balanced.
4.4 Connecting Power and Control
- Connect the power cable to the AC IN socket on the rear of the lighting bar.
- Plug the power cable into a suitable power outlet (AC100-240V 50/60Hz).
- For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the lighting bar. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next.
5. Operation
The SW-B5 lighting kit offers multiple control methods and dynamic lighting effects.
5.1 Control Methods
- DMX512: For professional control, connect to a DMX controller. The unit supports 16CH, 35CH, and 65CH DMX modes, allowing precise control over individual lights, colors, patterns, and strobe effects.
- Sound Active: The unit can react to music and sound, creating dynamic light shows automatically.
- Auto Mode: Pre-programmed light shows run automatically.
- Master/Slave: Link multiple units together, with one acting as the master to control the others.
5.2 Light Effects
The unit features 6x5W RGBW 4-in-1 LED Par lights, moving heads with 7 patterns + white, 7 colors + white, a light belt with 12x5050 RGB 0.2W beads, and 4x10W white strobe light beads. These components combine to produce a wide array of vibrant and dynamic lighting effects.
6. Maintenance
6.1 Cleaning
- Regularly clean the lenses and housing with a soft, lint-free cloth to maintain optimal light output and prevent overheating.
- Do not use abrasive cleaners or solvents.
6.2 Inspection
- Periodically check all cables and connections for wear or damage.
- Ensure all mounting hardware is secure.
7. Troubleshooting
- No Power: Check the power cable connection and the power outlet. Ensure the unit is switched on.
- No Light Output: Verify power, check DMX connections if in DMX mode, or ensure sound active mode is receiving audio input.
- Incorrect DMX Behavior: Confirm DMX address settings and channel modes on both the lighting unit and the DMX controller. Check DMX cable integrity.
- Overheating: Ensure proper ventilation around the unit. Clean any dust or debris from cooling vents.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Gig Bar 2pcs 6x5W RGBW 4in1 LED Par Bar Stage Lighting With Stand |
| Brand | Sailwin |
| Model Number | SW-B5 |
| Voltage | AC100-240V 50/60Hz |
| Total Power | 300W |
| Light Source | LED Total power: 300W, Light source: 30W with 2 white beads |
| Emitting Color | RGBW (4-in-1) |
| Patterns | 7 patterns + white |
| Colors | 7 colors + white |
| Light Belt | 12x5050 beads RGB 0.2W |
| Strobe Light Beads | 4x10W white Butterfly light |
| Par Light | 2x10W 4-in-1 Par light: 2pcs 6x5W 4-in-1 |
| Control Method | DMX512/SOUND ACTIVE |
| DMX Channels | 16CH, 35CH, 65CH |
| Material | ABS |
| Net Weight | 15.5 kgs |
| Application | Events, Party, Club, Disco, Mobile DJ, Wedding, etc. |
| Certification | CE, ROHS EMC, LVD |
9. User Tips
- For the most precise and dynamic light shows, it is highly recommended to connect the unit to a DMX controller.
- The portable design and included stand make this kit ideal for mobile DJs and various event setups.
- Experiment with different sound active modes to find the best synchronization with your music.
- Regular cleaning of the lenses will ensure maximum brightness and clarity of the light effects.
10. Warranty & Support
This product comes with a 1-year warranty from the date of purchase. Please refer to the sticker date on the machine for warranty validation.
In case of any issues, please contact customer service. Providing pictures or videos of the problem will help expedite the support process. The manufacturer offers 24/7 online service to assist with product-related inquiries.
11. Frequently Asked Questions
- Q: Does this product have any certifications?
- A: Yes, our products have CE, ROHS EMC, and LVD certifications. Please contact customer service if you require other specific certifications.