1. Introduction
This manual provides detailed instructions for the safe and efficient operation and maintenance of your Skycut F4560 or F6090 Flatbed Cutting Plotter. These machines are designed for high-accuracy auto contour cutting of various materials, featuring a powerful 2000g cutting force, dual heads, and vacuum adsorption for stable material handling.

Figure 1: Skycut F4560 Flatbed Cutter (front view)
2. Safety Information
- Always ensure the machine is placed on a stable, level surface.
- Keep hands and loose clothing away from moving parts during operation.
- Use the emergency button to immediately stop the machine in case of any malfunction or hazard.
- Ensure proper ventilation in the work area.
- Do not operate the machine with damaged power cords or connectors.
- Only use the specified voltage (110V/220V) for power supply.
- Minimize dust incursion by regularly cleaning the dustproof brush and surrounding areas.

Figure 2: Emergency Button and Dustproof Brush
3. Package Contents
Upon unpacking, please verify that all the following items are included in your package:
- Fittings box - 1 pc
- Power cable - 1 pc
- USB Cable - 1 pc
- 30° Blade - 1 pc
- 45° Blade - 2 pcs
- Blade Holder - 1 pc
- Plot Pen - 1 pc
- Pencil Lead - 2 pcs
- Creasing tool - 1 pc

Figure 3: Standard Parts for Flatbed Cutting Plotter F4560
4. Setup
4.1 Unpacking and Placement
- Carefully remove the plotter from its packaging.
- Place the plotter on a sturdy, level surface capable of supporting its weight (180KG for F4560, 200KG for F6090).
- Ensure adequate space around the machine for operation and maintenance.
4.2 Power Connection
- Connect the provided power cable to the plotter and a suitable power outlet (110V/220V).
- Ensure the power switch is in the OFF position before connecting.
4.3 Interface Connection
The plotter supports multiple connection interfaces:
- USB: Connect the USB cable from the plotter to your computer.
- WiFi: Configure WiFi settings via the touch screen control panel.
- Ethernet: Connect an Ethernet cable for network connectivity.

Figure 4: Connector Interfaces (USB, WiFi, Ethernet)
4.4 Tool Installation
- Insert the desired blade (30° or 45°) into the blade holder.
- Securely place the blade holder or creasing tool into one of the dual heads on the gantry system.
- Ensure tools are properly seated to prevent damage during operation.
5. Operation
5.1 Powering On and Control Panel
- Turn on the main power switch.
- The touch screen control panel will activate, providing access to various functions and settings.

Figure 5: Touch Screen Control Panel
5.2 Material Loading and Vacuum Adsorption
- Place the material (paper, card, synthetics, films, labels, etc.) onto the vacuum table.
- Activate the vacuum adsorption system via the control panel. The 1500W vacuum pump will securely fix the media, preventing lifting during operation.

Figure 6: Vacuum Table and Adsorption System
5.3 Auto Contour Cutting with Camera
- The built-in CCD camera enables automatic contour cutting.
- Place printed materials with registration marks on the cutting mat.
- The camera will scan the marks for precise alignment, allowing for fast, smart, and accurate cuts on reflective, colored, transparent, and various other materials.

Figure 7: CCD Camera for Auto Contour Cut
5.4 Cutting Process
- Prepare your design in compatible software and send it to the plotter via USB, WiFi, or Ethernet.
- Select the appropriate cutting parameters (force, speed, tool type) on the touch screen. The machine supports up to 2000g force.
- Initiate the cutting process. The dual heads can perform half cuts, full cuts, and creasing.
Video 1: Demonstration of the flatbed cutter performing contour cutting on printed material.
6. Maintenance
- Dustproof Brush: Regularly inspect and clean the dustproof brush to minimize dust accumulation and ensure smooth operation.
- General Cleaning: Keep the cutting table and gantry system clean from debris and material scraps.
- Blade Replacement: Replace blades when they become dull to maintain cutting precision.
- Software Updates: Check the manufacturer's website for any available software or firmware updates.
7. Troubleshooting
7.1 Common Issues
- Poor Cutting Quality:
- Check blade sharpness and replace if dull.
- Verify cutting force and speed settings are appropriate for the material.
- Ensure material is securely held by the vacuum adsorption.
- Contour Cutting Inaccuracy:
- Ensure registration marks are clear and properly printed.
- Clean the CCD camera lens if it appears dirty.
- Recalibrate the camera if necessary (refer to software instructions).
- Machine Not Responding:
- Check power connection and ensure the machine is turned on.
- Verify USB, WiFi, or Ethernet connection to the computer.
- Restart the machine and computer.
- Vacuum Adsorption Weak:
- Ensure the vacuum table is clean and free of obstructions.
- Check for any leaks in the vacuum system.
8. Specifications

Figure 8: Physical Dimensions of F4560 and F6090 Models
| Feature | F4560 | F6090 |
|---|---|---|
| Max cutting size | 600*450mm | 600*900mm |
| Contour cutting size | 600*450mm | 600*900mm |
| Working pattern | Vacuum adsorption | Vacuum adsorption |
| Auto contour cut | Camera | Camera |
| Control panel | Touch screen | Touch screen |
| Max force | 2000g | 2000g |
| Number of heads | 2 | 2 |
| Tool type | 45°/ 60° | 45°/ 60° |
| Cutting precision | +/-0.01mm | +/-0.01mm |
| Repeat precision | 0.05mm | 0.05 mm |
| Max moving speed | 800mm/s | 800mm/s |
| Max cutting speed | 7000mm/S | 7000mm/S |
| Connector interface | USB/WIFl//Ethernet | USB/WIFl//Ethernet |
| Working environment | +5°C-+35°C | +5°C-+35°C |
| Packing size | 1050*900*1020mm | 1370*1090*1020mm |
| Gross weight | 180KG | 200KG |
9. User Tips
- For optimal performance, ensure your work environment temperature is within the recommended range of +5°C to +35°C.
- When cutting intricate designs, consider performing a test cut on a scrap piece of the same material to fine-tune force and speed settings.
- Regularly check for and clear any small material scraps that might interfere with the vacuum adsorption or cutter movement.
10. Warranty and Support
The Skycut Flatbed Cutter comes with a 1-year warranty. For technical support, inquiries, or assistance, please use the contact information below:
- WeChat: 008613260171721
- WhatsApp: 008613260171721
- Email: info@jcprintssigns.com

Figure 9: Contact Information