FEKER JJK84

Contents

FEKER JJK84 84-Key Wireless Mechanical Keyboard Barebones Kit User Manual

Model: JJK84

1. Introduction

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your FEKER JJK84 84-Key Wireless Mechanical Keyboard Barebones Kit. Please read this manual carefully before use to ensure optimal performance and longevity of your device.

2. Package Contents

The FEKER JJK84 Barebones Kit typically includes:

  • FEKER JJK84 Keyboard Barebones (case, PCB, plate, stabilizers)
  • USB-C Cable
  • 2.4GHz USB Receiver (for wireless models)
  • Switch Puller (may vary)
  • Keycap Puller (may vary)

Please inspect the package contents upon receipt to ensure all items are present and undamaged.

3. Product Overview

Angled view of the FEKER JJK84 barebones kit
Angled view of the FEKER JJK84 barebones kit, showcasing the 84-key layout.
Close-up of the PCB and switch sockets
Close-up of the PCB and hot-swappable switch sockets.
Side view showing the USB-C port
Side view of the keyboard barebones kit, highlighting the USB Type-C port for wired connection and charging.
Top-down view of the barebones kit with USB dongle
Top-down view of the barebones kit, showing the layout and a separate 2.4GHz USB receiver for wireless connectivity.

4. Setup Instructions

This barebones kit requires switches and keycaps to be installed before use.

  1. Prepare Switches: Ensure your mechanical switches are compatible with hot-swappable PCBs (3-pin or 5-pin).
  2. Install Switches:
    • Align the pins of each switch with the holes on the PCB.
    • Gently push the switch into the socket until it clicks into place. Ensure pins are straight to avoid bending.
    • Repeat for all 84 keys.
  3. Install Keycaps:
    • Align the keycap stem with the cross-shaped mount on the switch.
    • Press down firmly until the keycap is securely attached.
    • Repeat for all keycaps, paying attention to the correct layout.
  4. Connect to Computer:
    • Wired Mode: Connect the provided USB-C cable to the keyboard's USB-C port and the other end to your computer's USB port.
    • 2.4GHz Wireless Mode: Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard should automatically connect.
    • Bluetooth Mode (if applicable): Refer to the operating instructions for Bluetooth pairing.
  5. Initial Test: Open a text editor and test all keys to ensure they are functioning correctly.

5. Operating Instructions

5.1 Connectivity Modes

  • Wired (USB-C): Connect the USB-C cable. The keyboard will operate in wired mode and charge simultaneously.
  • 2.4GHz Wireless: Ensure the 2.4GHz USB receiver is plugged into your computer. Switch the keyboard to 2.4GHz mode (usually via a switch on the back or a key combination).
  • Bluetooth (if supported):
    1. Switch the keyboard to Bluetooth mode.
    2. On your computer or device, search for Bluetooth devices.
    3. Select "FEKER JJK84" (or similar name) from the list to pair.
    4. The keyboard may support multiple Bluetooth profiles (e.g., BT1, BT2, BT3) for connecting to different devices. Refer to specific key combinations for switching between profiles.

5.2 Backlighting Control (RGB)

The FEKER JJK84 features RGB backlighting. Use the following key combinations to control it:

  • Fn + \ |: Cycle through backlight effects.
  • Fn + { [: Decrease backlight brightness.
  • Fn + } ]: Increase backlight brightness.
  • Fn + ; :: Decrease backlight speed.
  • Fn + ' ": Increase backlight speed.
  • Fn + . >: Cycle through backlight colors (for static modes).

5.3 Multimedia and Function Keys

The 84-key layout often utilizes the Fn key for accessing multimedia and other functions. Common combinations include:

  • Fn + F1-F12: Standard function keys (e.g., volume, media playback, brightness). Specific functions may be printed on the keycaps or require software configuration.
  • Fn + Win: Lock/Unlock Windows key.

Refer to the specific keycap legends or software for a complete list of function key combinations.

6. Maintenance

6.1 Cleaning

  • Keycaps: Use a keycap puller to remove keycaps. Clean them with mild soap and water, then dry thoroughly before reattaching.
  • Switches/PCB: Use compressed air to remove dust and debris from between switches. A soft brush can also be used. Avoid spraying liquids directly onto the PCB.
  • Case: Wipe the keyboard case with a soft, damp cloth. Avoid harsh chemicals.

6.2 Switch Replacement

The JJK84 is hot-swappable, allowing for easy switch replacement without soldering.

  1. Use a switch puller to carefully grip the top and bottom clips of the switch.
  2. Gently pull the switch straight up to remove it from the PCB.
  3. To install a new switch, align its pins with the sockets on the PCB and push down firmly until it clicks into place. Ensure pins are not bent.

Caution: Applying excessive force or misaligning pins can damage the switch sockets.

7. Troubleshooting

  • Keyboard not responding:
    • Check USB-C cable connection or 2.4GHz receiver.
    • Ensure the keyboard is switched to the correct mode (wired, 2.4GHz, or Bluetooth).
    • Recharge the keyboard if using wireless modes.
    • Try connecting to a different USB port or computer.
  • Keys not registering:
    • Ensure switches are fully seated in their sockets.
    • Remove and re-insert the affected switch.
    • Test with a different switch to rule out a faulty switch.
  • Backlight not working:
    • Check backlight brightness settings (Fn + { [ / } ]).
    • Ensure the keyboard is not in a low-power mode.
  • Wireless connectivity issues:
    • For 2.4GHz, ensure the receiver is close to the keyboard and there's no interference.
    • For Bluetooth, ensure the keyboard is in pairing mode and your device's Bluetooth is enabled. Try re-pairing.
    • Avoid placing large metal objects between the keyboard and receiver/device.

8. Specifications

FeatureDetail
ModelJJK84
Keyboard Standard84 Keys
TypeWired / Wireless (2.4GHz, Bluetooth if supported)
Interface TypeUSB Type-C
MechanicalYes
Hot-swappableYes (implied by barebones kit)
BacklightRGB
ProgrammableYes
Anti-ghostingMulti Keys
Wrist SupportNo
OriginMainland China

9. User Tips

  • Stabilizer Lubrication: For a smoother typing experience, consider lubricating the stabilizers (especially for the spacebar, shift, and enter keys) before installing keycaps.
  • Custom Firmware: Explore custom firmware options (if available for JJK84) to remap keys or create advanced macros for enhanced productivity or gaming.
  • Switch Variety: Experiment with different switch types (linear, tactile, clicky) to find your preferred typing feel, taking advantage of the hot-swappable PCB.
  • Keycap Profiles: Different keycap profiles (e.g., Cherry, OEM, DSA, XDA) can significantly alter the feel and aesthetics of your keyboard.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.