1. Introduction
The XINJE TG765G series is a robust 7-inch Human Machine Interface (HMI) display screen designed for industrial control and automation applications. It provides an intuitive touch-based interface for monitoring and controlling various processes and equipment. This manual provides essential information for the safe and effective installation, operation, and maintenance of your TG765G HMI device.

2. Setup and Installation
2.1 Safety Precautions
- Ensure all power is disconnected before installation or wiring.
- Only qualified personnel should perform installation and wiring.
- Avoid installing the HMI in environments with excessive dust, moisture, or extreme temperatures.
- Ground the device properly to prevent electrical hazards.
2.2 Unpacking and Inspection
Carefully unpack the HMI and inspect it for any signs of damage during transit. Verify that all components listed in the packing list are present. If any damage or missing parts are found, contact your supplier immediately.
2.3 Mounting
The TG765G HMI is designed for panel mounting. Cut an opening in the control panel according to the dimensions provided in the product specifications. Insert the HMI into the opening and secure it using the provided mounting clips. Ensure a snug fit to prevent dust and moisture ingress.
2.4 Wiring Connections
Connect the necessary cables to the HMI's ports as described below. Refer to Figure 2 for port identification.

- Power Supply: Connect a stable DC power source (typically 24V DC) to the designated power input terminals. Observe correct polarity.
- USB Ports: Use the USB host port for connecting USB flash drives for project transfer or data logging. The USB device port is typically used for connecting to a PC for programming.
- Ethernet Port: Connect an Ethernet cable for network communication with PLCs, other HMIs, or a PC.
- Serial Ports (RS232/RS485): Connect serial communication cables to PLCs or other devices using the appropriate serial protocol.
2.5 Initial Power On
After all connections are securely made, apply power to the HMI. The device should power on and display the boot screen. Follow any on-screen prompts for initial setup, such as language selection or calibration.
3. Operating Instructions
3.1 Touch Interface
The TG765G HMI features a resistive or capacitive touch screen for user interaction. Use your finger or a stylus to navigate menus, press buttons, and input data. Ensure the screen is clean for optimal touch response.
3.2 Navigating Screens and Menus
The HMI's interface is typically organized into multiple screens and menus, designed by the application developer. Tap on buttons or navigation elements to move between different views, access settings, or control processes. Common navigation elements include home buttons, back buttons, and tabbed interfaces.
3.3 Loading HMI Projects
HMI projects, created using XINJE's programming software, are loaded onto the device to define its functionality. This can typically be done via:
- USB Flash Drive: Copy the project file to a USB drive, insert it into the HMI's USB host port, and follow the on-screen instructions or use the system menu to import the project.
- Ethernet/Serial Connection: Connect the HMI to a PC running the programming software via Ethernet or serial cable, and use the software's download function.
3.4 Basic Functions
Once a project is loaded, the HMI will display the configured interface. Users can:
- Monitor real-time data from connected PLCs or devices.
- Input setpoints or commands to control equipment.
- View alarms and event logs.
- Access historical data and trends.
4. Maintenance
4.1 Cleaning
Regularly clean the HMI screen and casing with a soft, lint-free cloth dampened with a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials, as they can damage the screen or casing. Ensure no liquid enters the device.
4.2 Software and Firmware Updates
Periodically check the XINJE official website for software and firmware updates. Updates can provide new features, performance improvements, or bug fixes. Follow the provided instructions carefully when performing updates to avoid damaging the device.
4.3 Project Data Backup
It is highly recommended to regularly back up your HMI project files to an external storage device (e.g., USB flash drive or network drive). This ensures that your configurations and data are protected in case of device malfunction or accidental data loss.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| HMI does not power on | No power supply; incorrect wiring; faulty power adapter | Check power cable connection; verify power supply voltage; ensure correct polarity; test with a different power adapter if available. |
| Screen is unresponsive to touch | Screen calibration issue; software freeze; physical damage | Restart the HMI; perform screen calibration (if accessible via physical buttons); contact support if physical damage is suspected. |
| Communication error with PLC/device | Incorrect cable; wrong communication settings; device offline | Verify communication cable type and connection; check HMI and PLC communication parameters (e.g., baud rate, protocol, IP address); ensure the connected device is powered on and functioning. |
| Display issues (e.g., dim, flickering) | Brightness settings; faulty backlight; environmental factors | Adjust brightness/contrast settings in the HMI system menu; ensure adequate ventilation to prevent overheating; contact support if the issue persists. |
6. Specifications
| Feature | Detail |
|---|---|
| Product Type | Human Machine Interface (HMI) Display Screen |
| Model Series | TG765G (TG765G-MT, TG765G-XT, TG765G-UT, TG765G-ZT, TG765G-ET) |
| Screen Size | 7 Inch |
| Origin | Mainland China |
| Certification | CE |
| Package Length | 18 cm |
| Package Width | 15 cm |
| Package Height | 4 cm |
| Package Weight | 0.5 kg |
7. User Tips
- For detailed information on creating and managing HMI projects, refer to the comprehensive software manual provided by XINJE for their HMI programming environment.
- Always save your project frequently during development to prevent data loss.
- Consider using a screen protector to extend the life of the touch panel in harsh industrial environments.
8. Warranty and Support
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your seller directly. Technical support can be obtained by reaching out to the manufacturer or your authorized distributor. Ensure you have your product model and serial number ready when seeking support.