Dooya DM35R 10/17

Contents

Dooya Tubular Motor DM35R 10/17 Instruction Manual

Model: DM35R 10/17

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dooya Tubular Motor DM35R 10/17. This motor is designed for various types of motorized roller blinds and features RF433mhz remote control capabilities. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Dooya Tubular Motor DM35R-10/17 with two remote controllers

Figure 1: Dooya Tubular Motor DM35R-10/17 with included remote controllers.

Setup and Installation

The Dooya DM35R 10/17 tubular motor is designed for integration into roller blind systems. Proper installation is crucial for optimal performance and safety.

1. Package Contents

Dooya DM35R-10/17 motor and accessories including brackets and adjustment tool

Figure 2: Contents of the DM35R-10/17 package, including the motor, mounting accessories, and adjustment tool.

2. Tube Compatibility

Ensure the motor is compatible with your roller blind tube. The DM35R motor is suitable for 45mm double grooved tubes, 50mm grooved tubes, and 50mm round tubes. Please verify your tube type before installation to ensure the correct crown and driving adapter are used.

Diagram showing various tube types for roller blinds, including 38mm, 40mm, 45mm, 47mm grooved, 50mm round, 50mm grooved, 55mm, 63mm, and 83mm

Figure 3: Examples of various tube types for roller blinds.

3. Installation Overview

The motor integrates into the roller blind tube. The system typically includes the tubular motor, drive adapter, one pair of brackets, tail plug, driving tube, fabric, bottom beam, and a remote controller.

Diagram illustrating the components of a motorized roller blind system, including the tubular motor, drive adapter, brackets, tube, fabric, bottom beam, and remote controller.

Figure 4: Solution for Motorized Roller Blinds - Component Diagram.

4. Wiring

The motor uses a three-wire connection for power and control. Refer to the wiring diagram for correct connections. The wires are typically colored blue (Neutral), yellow/green (Earth), and brown (Live).

Close-up of the motor's power cable showing blue, yellow/green, and brown wires.

Figure 5: Motor wiring detail.

Technical data table and wiring diagrams for 230V/50Hz and 120V/60Hz motors. The 230V/50Hz diagram shows Blue = Neutral, Green/Yellow = Earth, Brown = Live. The 120V/60Hz diagram shows White = Neutral, Green = Earth, Black = Live.

Figure 6: Detailed wiring diagrams for 230V/50Hz and 120V/60Hz models.

5. Limit Adjustment

The motor features limit adjustment screws on the motor head to set the upper and lower travel limits of the blind. Use the provided adjustment tool to precisely set these limits. The video below demonstrates the product and its features, including limit adjustment.

Video 1: Product overview and demonstration of the Dooya Tubular Motor DM35R 10/17, including limit adjustment.

Operating Instructions

The DM35R 10/17 motor is controlled via a 433RF remote controller. Ensure your remote controller is a rolling code version compatible with the motor.

1. Remote Control Pairing

For new rolling code motors, it is essential to correctly pair the motor with a compatible rolling code remote control. Refer to the remote control's specific instructions for pairing procedures.

2. Basic Operation

Use the remote control to raise, lower, and stop the roller blinds. The specific buttons for these functions will be indicated on your remote controller (e.g., up arrow for raising, down arrow for lowering, stop button).

A hand holding a remote controller, operating roller blinds in a living room setting.

Figure 7: Example of operating roller blinds with a remote controller.

Three different Dooya remote controller models: DC2700AC, DC2760AC, and DC2702.

Figure 8: Various compatible Dooya remote controller models.

Maintenance

The Dooya DM35R 10/17 tubular motor is designed for long-term, maintenance-free operation. However, regular checks can help ensure its longevity:

  • Keep the motor and surrounding areas free from dust and debris.
  • Periodically check the power cable for any signs of damage or wear.
  • Ensure the roller blind fabric moves smoothly and is not obstructed.

No user-serviceable parts are inside the motor housing. Do not attempt to open or repair the motor yourself.

Troubleshooting

If you encounter issues with your Dooya Tubular Motor, consider the following common troubleshooting steps:

  • Motor not responding: Check power supply. Ensure the remote control batteries are not depleted and that the remote is correctly paired with the motor.
  • Blinds not moving to set limits: Re-check and adjust the upper and lower limit settings using the adjustment tool.
  • Unusual noises during operation: Inspect the roller blind mechanism for any obstructions or misalignments. Ensure the motor is securely mounted.
  • Intermittent operation: Check for any potential RF interference or ensure the remote control is within range.

If problems persist after these steps, please contact customer support for assistance.

Specifications

FeatureSpecification
Model NumberDM35R 10/17
Brand NameDooya (BIAONU)
Voltage220V/230V
Frequency50/60HZ
Rated Torque (RL)10Nm
Rated Speed17r/min
Rated Power121W
Rated Current0.53A
Capacitor4uF/450V
Protection DegreeIP44
Max Load24kg
Built-in Receiver433mhz
Compatible RemoteDooya 433mhz remote controller
Product Weight1.68kg
Package Dimensions (L x W x H)70cm x 11cm x 10cm
OriginMainland China
Close-up of the Dooya DM35R-10N/17 motor label showing detailed specifications.

Figure 9: Motor label with detailed specifications.

User Tips

  • Tube Type Verification: Always confirm the type and dimensions of your roller blind tube (e.g., 45mm double grooved, 50mm grooved, 50mm round) before purchasing and installing the motor to ensure proper fit and function.
  • Remote Control Compatibility: If you are purchasing a new motor, ensure that any remote controls you intend to use are specifically designed for rolling code motors and operate on the 433mhz frequency for seamless pairing and operation.
  • Electronic Manual: An electronic version of the instruction manual can be downloaded by scanning the QR code found on the product packaging. This may provide additional detailed instructions and diagrams.

Warranty and Support

For any warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt and product model information handy when seeking support.

An electronic version of the user manual may be available by scanning the QR code on the product packaging.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.