FALCAM T00A4903 C141K-301

Contents

FALCAM T00A4903 C141K-301 TreeRoot Quicklock Travel Tripod Instruction Manual

Model: T00A4903 C141K-301

Introduction

Thank you for choosing the FALCAM T00A4903 C141K-301 TreeRoot Quicklock Travel Tripod. This carbon fiber tripod is designed for professional photography, offering ultra-stable, ultra-swift, and ultra-light performance. This manual provides essential information for the proper setup, operation, and maintenance of your tripod to ensure optimal performance and longevity.

Specifications

Tripod Model: C141K-301

FeatureDetail
MaterialAluminum Alloy + Carbon Fiber
Net WeightAbout 1.3kg
Leg Tube DiameterØ26mm, Ø22mm, Ø17.9mm, Ø13.8mm
Sections4
Folded LengthAbout 472mm
Max Working HeightAbout 1530mm
Min Working HeightAbout 185mm
Leg Load CapacityAbout 40kg
Center Column Load Capacity10kg (extended) - 20kg (retracted)
Ball Head Diameter30mm
Ball Head Load Capacity3kg

Ball Head Model: 301

FeatureDetail
MaterialAluminum Alloy
Maximum External DimensionsApprox. Ø57 X 62.8mm
Net WeightAbout 0.14kg
Ball Head Locking Force4 N.m
Panoramic Direction Locking Force4 N.m
FALCAM TreeRoot Tripod and Ball Head Model 301 specifications
Detailed specifications for the FALCAM TreeRoot Tripod (C141K-301) and Ball Head (301).

Setup

1. Unpacking and Initial Inspection

Carefully remove all components from the packaging. Verify that all parts are present: tripod, ball head (if separate), tripod bag, and adjustment wrench.

2. Attaching the Ball Head

If the ball head is not pre-attached, securely screw it onto the tripod's mounting plate. Use the included wrench with its magnetic tip for precise installation and to adjust leg tension as needed. Ensure it is tightened firmly to prevent wobbling.

Wrench for tripod head installation and leg tension adjustment
The included wrench with a magnetic tip facilitates tripod head installation and leg tension adjustment.

3. Extending Tripod Legs

The TreeRoot tripod features an innovative 1/3 limited quick-lock design. To extend a leg section, twist the leg collar about 1/3 turn with one hand. This action instantly releases all leg sections, allowing for smooth and rapid setup. Extend the legs to your desired height and twist the collar back to lock them securely.

Quick lock mechanism for tripod legs
The 1/3 turn quick-lock design allows for rapid leg extension and retraction.

4. Adjusting Leg Angles

Each leg features an auto-reset angle lock. Press the angle lock button to adjust the leg to different spread angles for stability on uneven terrain or for low-angle shots. Ensure the lock engages firmly after adjustment.

5. Mounting Your Camera (F38 Quick Release)

The F38 Quick Release system allows for rapid camera attachment. Attach the F38 plate to your camera's tripod mount. To mount the camera onto the ball head, slide the F38 plate into the receiver on the ball head until it clicks into place. For secure locking, align your camera lens with the ball head's directional indicator during use.

F38 Quick Release system for camera mounting
The F38 Quick Release system enables fast and secure camera attachment.

Operating Instructions

1. Adjusting Tripod Height

The tripod offers a maximum working height of approximately 153cm and a minimum working height of approximately 18cm. Adjust the leg sections using the quick-lock mechanism to achieve your desired height. The center column can also be extended or removed for maximum flexibility, including very low-angle shots.

Tripod in use showing maximum and minimum working heights
The tripod supports a wide range of working heights, from 18cm to 153cm.

2. Ball Head Operation (Model 301)

The F38 Quick Release Trigger Upright Ball Head (301) provides versatile camera positioning. The trigger controls all movement of the ball head. Simply unlock and adjust the ball head to pan horizontally (360° panning), rotate the ball (360° ball rotation), or quickly switch between horizontal and vertical shooting. Precision scales are integrated for accurate framing.

Ball head controls for rotation, panning, and vertical shooting
The ball head allows for 360° rotation, panning, and quick switching between horizontal and vertical shooting.

3. Adapting to Terrain

The tripod is designed for all-terrain stability. It features multi-surface foot pads that adapt to varied terrains for stable support. For extremely rugged or soft surfaces, the three-pronged spike design can be deployed to grip soft carpets, ice, or loose ground securely.

Multi-surface foot pads and three-pronged spike design
Choose between multi-surface foot pads or three-pronged spikes for optimal stability on various terrains.

4. Using the Multi-Function Hook

A multi-function hook is integrated into the tripod design. This hook can be used to hang sandbags or backpacks, adding extra weight to the tripod for increased stability, especially in windy conditions.

Multi-function hook for hanging weights
Utilize the multi-function hook to add stability by hanging additional weight.

Maintenance

1. Cleaning

Regularly clean your tripod to remove dust, dirt, and moisture. Use a soft, dry cloth for general cleaning. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials that could damage the carbon fiber or aluminum alloy finishes.

2. Leg Seals

The leg collars feature O-ring seals designed to significantly reduce sand and dust ingress into the leg sections. While these seals offer protection, it is still recommended to clean the leg sections after use in sandy or dusty environments to maintain smooth operation.

3. Storage

When not in use, store the tripod in its dedicated tripod bag. The bag is constructed with CD Yarn and high-density neoprene for reinforced protection. Store in a dry, cool place away from extreme temperatures and direct sunlight.

FALCAM TreeRoot Tripod with its protective carrying bag
The tripod comes with a durable bag for protection and easy transport.

Troubleshooting

1. Legs Not Extending/Retracting Smoothly

Ensure the quick-lock collars are fully disengaged (twisted 1/3 turn) before attempting to extend or retract legs. If there is resistance, check for any debris or sand in the leg sections. Clean as per the maintenance section. Avoid forcing the legs.

2. Ball Head Not Locking Securely

Verify that the F38 Quick Release plate is correctly seated and clicked into the ball head receiver. Ensure the ball head's locking mechanism is fully engaged. If the issue persists, check for any obstructions or loose components on the ball head. The included wrench can be used to check the tightness of the ball head mounting.

3. Tripod Instability

Ensure all leg sections are fully extended and locked. Verify that the leg angle locks are engaged. On uneven terrain, adjust individual leg angles for maximum contact with the ground. Consider using the multi-function hook with added weight for enhanced stability, especially with heavy camera setups or in windy conditions.

User Tips

  • Always ensure your camera and lens are balanced on the ball head before tightening to prevent accidental tipping.
  • When shooting in windy conditions, utilize the multi-function hook to hang a camera bag or sandbag for increased stability.
  • For low-angle photography, fully splay the legs and consider removing the center column for maximum flexibility.
  • Regularly check all locking mechanisms and connections for tightness, especially before important shoots.
  • Practice quick setup and breakdown to become proficient with the quick-lock leg system and F38 quick release.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.