MYAMi MY-MPPT5600F

Contents

MYAMi MY-MPPT5600F Solar Charge Controller User Manual

Model: MY-MPPT5600F

1. Product Overview

The MYAMi MPPT Solar Charge Controller is designed for solar off-grid power generation systems to automatically regulate battery charging and discharging. It utilizes advanced tracking algorithms to maximize power extraction from solar panels and efficiently charge the battery. Its low voltage disconnect (LVD) function prevents battery damage from over-discharge.

The controller features a full-color LCD display for clear and intuitive operation data and charging status. It also includes an intelligent temperature-controlled fan and multiple protection functions to ensure safe and reliable operation.

MYAMi MPPT Solar Charge Controller highlighting 5 major advantages
Figure 1: MYAMi MPPT Solar Charge Controller with 5 Major Advantages listed: 1. Lithium battery activation function, 2. Intelligent multiple protection, 3. Intelligent control charging, 4. Intelligent temperature controlled fan, 5. Full color multifunctional display.
Diagram showing product application in various scenarios like solar panel, electricity, wind power, UPS, RV, and indoor settings.
Figure 2: Product Application Diagram, illustrating the controller's use in diverse off-grid power systems including RVs, homes, and industrial setups.

2. Setup and Installation

Please read all instructions carefully before installation. Ensure all connections are secure and correct to prevent damage to the controller or other components.

2.1 Safety Precautions

  • It is strictly prohibited to input high voltage into the solar controller. The input voltage of the solar panel (Voc) cannot exceed 150V.
  • It is strictly prohibited to charge low voltage batteries with high voltage settings. The battery type and voltage settings must be consistent with the battery being charged.
  • Always distinguish between positive and negative poles for all DC equipment. Incorrect polarity will damage the controller.
  • Ensure wiring insulation and take waterproof measures. Keep out of reach of children.

2.2 Connection Steps

  1. Connect the Solar Panel: Connect the positive and negative electrodes of the solar panels to the designated PV input terminals on the controller. Ensure the output voltage gear is properly set before connecting to the battery.
  2. Connect the Battery: Connect the positive and negative terminals of the battery to the designated battery charge terminals on the controller. Carefully confirm the positive and negative polarity repeatedly.
  3. Verify Connections: After connecting the solar panel and battery, the controller's display screen should light up if connected correctly. If not, check all positive and negative connections.
Wiring diagram showing connections for battery and solar panel to the MPPT controller, with labeled positive and negative terminals, fan, and fuse.
Figure 3: Detailed Wiring Diagram. Connect the solar panel positive electrode to the solar positive input, solar negative electrode to the solar negative input. Connect the battery positive pole to the battery positive input, and battery negative pole to the battery negative input.
Front and back view of the MPPT controller with LCD display, battery voltage adjustment button, battery type switching button, intelligent controlled fan, PV panel input, and battery charge terminals labeled.
Figure 4: Panel Description and Connections. Shows the LCD display, battery voltage adjustment button, battery type switching button, intelligent controlled fan, PV panel input, and battery charge terminals.

2.3 Setting Battery Type and Voltage

The factory default setting is a 24V lead-acid battery in a locked state. If your battery type or voltage differs, you must adjust the settings:

  1. Enter Setting Mode: Long press the 'Set' button on the panel until the setting state lock icon disappears.
  2. Select Voltage Gear: Use the panel gear selector switch to choose the appropriate voltage:
    • 12V gear (top): For 12V systems.
    • 24V gear (middle): For 24V systems (factory default).
    • 48V gear (bottom): For 48V systems.
  3. Select Battery Type: If using a lithium battery, after setting the voltage gear, short press the 'Set' button to cycle through battery types (Lead-acid, Gel, Lithium Iron Phosphate, Ternary Lithium) and charging voltages until you find the correct one.
  4. Lock Settings: Once the desired voltage gear and battery type are selected, long press the 'Set' button to lock the setting parameters.

Refer to the 'Comparing table between voltage gear and switchable voltage and battery type' in the Specifications section for detailed voltage and battery type configurations.

3. Operating Instructions

The controller features a full Chinese color LCD display that provides real-time operational data and charging status. Power and electricity generation are automatically displayed alternately.

3.1 LCD Display Information

MYAMi MPPT Solar Charge Controller with an enlarged view of the LCD display showing photovoltaic voltage, charging current, charging voltage, power, temperature, MPPT status, and battery status.
Figure 5: LCD Display showing real-time data including photovoltaic voltage, charging current, charging voltage, power, temperature, MPPT status, and battery status (e.g., SLA Charging Full).
  • Photovoltaic Voltage: Displays the current voltage from the solar panels.
  • Charging Current: Shows the current flowing into the battery.
  • Charging Voltage: Indicates the current voltage of the battery.
  • Power: Displays the instantaneous power being generated.
  • Cumulative Power Generation: Shows the total power generated over time.
  • Controller Temperature: Displays the internal temperature of the controller.
  • Battery Status: Indicates the battery's charge level and status (e.g., 'Charging Full').
  • MPPT Status: Confirms if Maximum Power Point Tracking is active.
  • Fan Status: An icon indicates when the intelligent temperature control fan is running.
  • Setting Status Lock: An icon indicates if the settings are locked or unlocked.

3.2 Intelligent Features

  • MPPT High Efficiency Charging: The controller uses a floating point DSP-MCU as its digital control core, enabling high-precision numerical control MPPT algorithm for optimal power generation efficiency (up to 99% peak efficiency, 98% conversion rate).
  • Intelligent Temperature Control Fan: The cooling fan automatically turns on when the controller's internal temperature exceeds 45°C and turns off when it drops below 40°C, ensuring optimal operating temperature.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar charge controller.

  • Fuse Replacement: If a fuse needs replacement, always use a fuse with the exact same specifications and parameters. It is strictly prohibited to replace fuses with larger sizes or with copper wires, as this can lead to severe damage or fire.
  • Connections Check: Periodically inspect all wiring connections for tightness and corrosion. Loose or corroded connections can lead to power loss and overheating.
  • Cleaning: Keep the controller clean and free from dust and debris. Ensure the fan vents are unobstructed to allow for proper cooling.
  • Environmental Conditions: Ensure the controller is installed in a stable environment, protected from direct sunlight, excessive moisture, and extreme temperatures.

5. Troubleshooting

The controller is equipped with multiple protection features to prevent damage. If you encounter issues, check the following:

5.1 Common Issues and Solutions

  • Controller Not Powering On:
    • Check all wiring connections, especially the battery and solar panel connections, for correct polarity and secure contact.
    • Ensure the solar panel is receiving sufficient sunlight and generating voltage.
    • Verify the battery has enough charge to power the controller's display.
  • Battery Not Charging:
    • Confirm the solar panel input voltage is within the controller's operating range (18-145V).
    • Check the battery type and voltage settings on the controller match your battery.
    • Inspect the solar panels for any shading or damage.
    • Ensure the charging current is not being limited by a protection mechanism.
  • Overcharge Protection: The controller prevents overcharging. If the battery is full, the controller will stop charging. This is normal operation.
  • Reverse Connection Protection: The controller has reverse connection protection. If the battery or solar panel is connected with reverse polarity, the controller will not operate and may trigger a protection state. Correct the wiring immediately.
  • High Temperature Protection: If the controller's internal temperature becomes too high, it will reduce charging power or shut down to prevent damage. Ensure proper ventilation and that the cooling fan is operating.
  • Over-Power Protection: If the input power from the solar panels exceeds the controller's capacity, it will limit the power to prevent damage.
Diagram illustrating multiple protection features of the MPPT controller: Polarity Protection, Over-Charging Protection, Over-Temperature Protection, Over-Load Protection.
Figure 6: Multiple Protection Features, including polarity, over-charging, over-temperature, and over-load protection.

6. Specifications

6.1 General Specifications

AttributeValue
Model NumberMY-MPPT5600F
ApplicationSolar System Controller
Is Smart DeviceNo
High-concerned chemicalNone
OriginMainland China
Product NameMPPT Solar Charge Controller
MPPT Efficiency97% (Peak efficiency 99%, conversion rate up to 98%)
DisplayLCD Display (Full Chinese color LCD)
ProtectionOCP/OLP/SCP/OTP (Over Current, Over Load, Short Circuit, Over Temperature Protection)
is_customizedYes

6.2 Model-Specific Parameters (MY-MPPT5600F)

ParameterValue
Input Voltage18-150V
Controller TypeMPPT
Charging Current100A
Controller Power (12V)1400W
Controller Power (24V)2800W
Controller Power (48V)5600W
Size26.5 * 10 * 19.5 cm
Weight2.9 kg
Battery TypeLead acid/Gel/Phosphate/Ternary battery
Table showing specifications for MY-MPPT2800F and MY-MPPT5600F models, including input voltage, controller type, charging current, controller power for 12V, 24V, 48V, size, and weight.
Figure 7: Model Specifications for MY-MPPT2800F and MY-MPPT5600F.
Table showing specifications for MY-MPPT700F and MY-MPPT1400F models, including input voltage, controller type, charging current, controller power for 12V, 24V, 48V, size, and weight.
Figure 8: Model Specifications for MY-MPPT700F and MY-MPPT1400F.

6.3 Voltage Gear and Battery Type Comparison

Voltage GearSetting Voltage and Battery Type
12V gear (top)
  • Lead-acid battery: Charging full voltage 14.6V
  • 4 string Lithium Iron Phosphate battery: Charging full voltage 14.6V
  • 3 string Ternary Lithium battery: Charging full voltage 12.6V
  • 4 string Ternary Lithium battery: Charging full voltage 16.8V
24V gear (middle)
  • Lead-acid batteries: Charging full voltage 29.2V (factory default)
  • 8 string Lithium Iron Phosphate battery: Charging full voltage 29.2V
  • 7 string Ternary Lithium battery: Charging full voltage 29.4V
48V gear (bottom)
  • Lead-acid batteries: Charging full voltage 58.4V
  • 16 string Lithium Iron Phosphate battery: Charging full voltage 58.4V
  • 15 string Lithium Iron Phosphate battery: Charging full voltage 54.7V
  • 14 series Ternary Lithium battery: Charging full voltage 58.8V

7. User Tips

No specific user tips were available from reviews or Q&A content.

8. Additional Resources

For a comprehensive guide, you can refer to the official user manual PDF: User Manual (PDF).

8.1 Product Video

Video: MYAMi Solar Boost Charge Controller 1200W Product Overview and Connection Guide. This video demonstrates the physical features, input/output connections, and the HD LCD color screen display of the controller.

9. Warranty and Support

For warranty information or technical support, please contact the seller directly through the platform where the product was purchased. Keep your purchase records for reference.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.