1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Hobbywing EZRUN MAX5 HV G2 250A Brushless Electronic Speed Controller (ESC) and 56118SD Sensored Brushless Motors. This high-performance power system is designed for 1/5 scale RC trucks and cars, offering robust power delivery and advanced features for an optimal driving experience.
Key features include a powerful 12S HV ESC, sensored motor compatibility for smooth control, IP67 waterproof and dustproof protection, a powerful built-in BEC, capacitor upgrades for enhanced protection, and a detachable motor design for easy maintenance. The system also supports real-time data recording via an OTA Bluetooth module and mobile app, and features Turbo timing technology for increased performance.
2. Safety Information
2.1. Instructions for Use
- After opening the package, inspect all components for completeness.
- Handle with care; avoid impact or collision.
2.2. Precautions
- Keep small parts away from children's mouths; keep away from fire sources.
- Store away from high temperatures and humid environments.
- Do not immerse in water or wash with water.
- Store in a location inaccessible to children.
2.3. Warning Statements
- This product is not suitable for children under 14 years of age.
- Do not ingest small parts to prevent choking.
- ATTENTION: For household use only.
- ATTENTION: Not suitable for children under 36 months.
- ATTENTION: To be used under the direct supervision of an adult.
- WARNING: Be aware of potential fire hazards; strictly follow the instruction manual for charging and storage.



3. Setup
3.1. Component Overview
Ensure all components are present and undamaged before installation. The system typically includes the EZRUN MAX5 HV G2 ESC and a 56118SD motor (available in 650KV, 800KV, or 1100KV variants).

Image: EZRUN MAX5 HV G2 ESC and 56118SD Motor installed in an RC car.
3.2. Wiring and Installation
The ESC and motor are designed for perfect compatibility, providing a sensored setup for smooth and precise control. Connect the motor to the ESC using the provided wires, ensuring correct phase connection. Connect the ESC to your receiver and battery according to your RC vehicle's specific requirements.

Image: EZRUN MAX5 HV G2 ESC with connected wires and switch.
The new sensor wire interface enhances the ESC's protection level and addresses waterproof concerns. Ensure the sensor wire is properly connected. Note: This ESC supports sensored motors with common interfaces. A sensor wire needs to be purchased separately if not included.

Image: New sensor wire interface for enhanced waterproof protection.
3.3. ESC Parameter Adjustment
The ESC parameters can be adjusted using a dedicated setting card. This allows customization of various settings, such as reverse speed/power, to suit your driving style and vehicle.
- Power Off: First, turn off the ESC power.
- Disconnect Receiver: Disconnect the ESC plug from the second channel of your receiver.
- Insert Setting Card: Take out the setting card and insert its plug into the ESC, aligning with the marked indicators.
- Power On ESC: Turn on the ESC power. The setting card will light up, indicating it's connected.
- Adjust Parameters: Use the 'ITEM' button to select the parameter you wish to modify. Use the 'VALUE' button to change the parameter's value. Refer to the programming table in the specifications section for available options.
- Save Settings: Once you have adjusted the desired parameters, press the 'OK' button to save the changes.
- Reconnect: After saving, turn off the ESC power. Remove the setting card and plug the ESC back into the receiver.
- Test: Turn on the power and test the modified settings.
Video: Demonstrates how to use the setting card to adjust ESC parameters, specifically showing an increase in reverse speed.
4. Operating Instructions
The EZRUN MAX5 HV G2 ESC is designed to operate in full-sensored mode when paired with the Hobbywing EZRUN 56118 G2 motor, ensuring a smooth and precise control experience. It supports up to 12S LiPo with a maximum output current of up to 250A, providing strong, explosive, and stable power.
- Driving Modes: The ESC meets various application requirements such as violent start-up, straight-line high-speed, flying slopes, and low-speed walking.
- Turbo Timing Technology: The ESC supports up to 24 degrees of Turbo Timing adjustment, offering an approximate 18% increase in performance when paired with the new Hobbywing EZRUN 56118 SD G2 motors. Note: For non-Hobbywing EzRun 56118 G2 motors, Turbo timing cannot be turned on.
- Real-time Data: Connect the ESC to an OTA Bluetooth module (sold separately) and use the mobile phone APP to view real-time data and operating status such as throttle, voltage, current, temperature, and speed. The effective Bluetooth transmission distance is approximately 5 meters.

Image: Real-time data recording via OTA Bluetooth module and mobile app.
5. Maintenance
- Motor Cleaning: The motor adopts a modular detachable structure design, which is convenient for daily cleaning and maintenance, effectively prolonging its service life and maintaining working efficiency.
- Waterproof Protection: The IP67 waterproof rating provides excellent waterproof and dustproof performance, allowing the power system to drive on various surfaces including mud, sand, ice, and water without damaging the power unit. However, note that the IP67 protection level is splash-resistant, water-resistant, and dust-resistant under normal use, and splash, water, and dust resistance are not permanently effective. The level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.
- Storage: Store the ESC and motor in a dry, cool environment, away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect all wires and connectors for signs of wear or damage. Ensure all connections are secure.

Image: Detachable module design for easy motor maintenance.

Image: High protection level for all-weather operation.
6. Troubleshooting
If you encounter any issues with your Hobbywing EZRUN MAX5 HV G2 ESC or 56118SD Motor, please consider the following general troubleshooting steps:
- Check Connections: Ensure all wires are securely connected to the ESC, motor, receiver, and battery.
- Battery Status: Verify that your battery is fully charged and in good condition.
- Parameter Settings: Review your ESC parameters using the setting card to ensure they are configured correctly for your vehicle and driving style. Incorrect settings can lead to unexpected behavior.
- Overheating Protection: The ESC is equipped with a built-in capacitor thermal protection function to prevent overheating. If the system stops unexpectedly, allow it to cool down. The motor also has an overheat thermal protection function when used with the compatible ESC.
For persistent issues, refer to the detailed troubleshooting guide in the full user manual (PDF) or contact customer support.
7. Specifications
7.1. EZRUN MAX5 HV G2 ESC Specifications

Image: EZRUN MAX5 HV G2 ESC Specifications.
| Feature | Description |
|---|---|
| Product Name | EZRUN MAX5 HV G2 |
| Product Number | 30104200 |
| Type (Scale) | 1/5th |
| Type (Brushed/Brushless) | BL |
| Type (Sensored/Sensorless) | SD |
| Type (Waterproof) | Yes |
| Cont./Peak Current | 250A/1600A |
| Input Voltage | 6-12S Lipo |
| BEC Output | 6V/7.4V/8.4V adjustable, continuous current 8A (Switch-mode) |
| Input Wires | Black-8AWG-200MM*1/Red-8AWG-200MM*1 |
| Input Connectors | 8.0mm Bullet Connectors (Female) |
| ESC Programming via SET Button | Not Supported |
| ESC Programming via LED Program Box | Supported |
| ESC Programming via LCD Program Box | Supported |
| ESC Programming via OTA Programmer | Supported |
| ESC Programming via Program Port | Independent programming port |
| Firmware Upgrade | Supported |
| Size | 94.5*59.4*50.9mm |
| Weight (Included input wires) | 428.5g |
| Applications (Motors) | Sensored / Sensorless Brushless Motor |
| Applications (Vehicles) | 1/5th Buggy, Truck |
| Applications (KV Rating/T Count) | 56118 size motor |
7.2. EZRUN 56118SD G2 Motor Specifications

Image: EZRUN 56118SD G2 Motor Specifications.
| Feature | 650KV | 800KV | 1100KV |
|---|---|---|---|
| Product Number | 30402902 | 30402901 | 30402903 |
| Scale | 1/5th | 1/5th | 1/5th |
| Brushed/Brushless | BL | BL | BL |
| Sensored/Sensorless | SD | SD | SD |
| Pole | 4 | 4 | 4 |
| KV Rating | 650KV | 800KV | 1100KV |
| LiPo Cells | 8-12S LiPo | 8-12S LiPo | 8-12S LiPo |
| No-Load Current(A) | 5.5A | 6.9A | 8.0A |
| O.D.(mm) | 56 | 56 | 56 |
| Length (mm) | 119.2 | 119.2 | 119.2 |
| Shaft Diameter (mm) | 8 | 8 | 8 |
| Connectors (mm) | 8.0mm (male) | 8.0mm (male) | 8.0mm (male) |
| Weight (g) | 1272g | 1277g | 1287g |
| Front Bearing | D22*D8*T7 | D22*D8*T7 | D22*D8*T7 |
| Rear Bearing | D19*D8*T6 | D19*D8*T6 | D19*D8*T6 |
| Applications | 1/5th Buggy, Truck | 1/5th Buggy, Truck | 1/5th Buggy, Truck |
8. User Tips
- Check Components: Upon receiving your product, carefully inspect all components to ensure everything is present and in good condition.
- Customize Settings: Don't hesitate to use the setting card to adjust parameters like reverse speed. Tailoring these settings can significantly improve your RC vehicle's performance and handling to your preference.
- Monitor Performance: Utilize the OTA Bluetooth module and mobile app to monitor real-time data. This can help you understand your system's performance and identify potential issues early.
9. Warranty & Support
If you encounter any issues with the product, please contact the store's customer service immediately for assistance. Keep your purchase records for any warranty claims.