MEKEDE KA65M95S-A-10Y

Contents

MEKEDE 9-inch Car Multimedia System User Manual

For KIA Ray (2011-2017) Models

Introduction

Thank you for choosing the MEKEDE Car Multimedia System. This manual provides detailed instructions for the safe and effective use of your device. Please read it carefully before installation and operation.

Note: Due to continuous product improvements, some descriptions in this manual may differ from the actual equipment. Specifications are subject to change without notice.

MEKEDE 9-inch Car Multimedia System with Android 14, 8-Core, 4+64GB, 4G LTE, 5G WIFI, DSP+RDS
Figure 1: MEKEDE 9-inch Car Multimedia System Overview
MEKEDE 9-inch Car Multimedia System installed in a KIA Ray dashboard
Figure 2: System installed in a KIA Ray (2011-2017) dashboard

Safety Measures

  • Avoid watching videos or using visual accessories while driving, as this can reduce attention and lead to accidents.
  • This unit is designed for 12V power supply with minus ground. Do not install in vehicles with 24V on-board voltage to prevent damage.
  • Use a specialized cleaning device for screen maintenance.
  • Prevent overheating by avoiding direct sunlight and installation near heating systems. Operate between 0°C and 35°C. Allow vehicle interior to cool or warm to normal operating temperature before use.
  • Use only provided fasteners (screws, mounting frames) for installation to avoid damage and warranty void.
  • Installation and connection should be performed by a qualified specialist.
  • Avoid resetting to factory settings unless absolutely necessary, as this can lead to data loss and incorrect operation.
  • Violation of these measures may cause system malfunction and void the warranty.

Package Contents

Package contents including main unit, power cable, RCA cable, reversing camera, USB cable, GPS antenna, 4G antenna, and microphone
Figure 3: Included components for the multimedia system

The package typically includes:

  • Main Machine Unit
  • Power Cable
  • RCA Cable
  • Reversing Camera (for M90S M95S models)
  • USB Cable (2 or 3 depending on model)
  • GPS Antenna
  • 4G Antenna (for M200S M400S M700S M800S models)
  • Microphone (for M200S M400S M700S M800S models)

Setup and Installation

Connection Diagram

Detailed wiring diagram for the car multimedia system, showing connections for power, speakers, GPS, 4G, USB, and cooling fan
Figure 4: General connection diagram for the device

Refer to the diagram above for connecting the various cables including power, speakers, GPS antenna, 4G antenna, USB ports, and optional cooling fan.

Rear Camera Connection

There are two methods for connecting the rear camera:

  1. Without CANBUS Box:
    • Connect the reversing camera control wire to A5.
    • Connect the camera's 12V power supply to the car's reverse light 12V.
    • Connect the camera's GND to car ground.
  2. With CANBUS Box:
    • If a CANBUS box is used, the yellow reversing control line may not be needed.
    • Connect ACC to A3 ACC.
    • Connect the two red wires of the camera power together, but do not connect with other wires.
    • Connect camera GND to car ground.
Diagram showing how to connect a rear view camera to the multimedia system
Figure 5: Rear camera wiring diagram

CANBUS Box Setup (If applicable)

If original car functions like steering wheel control are not working, a CANBUS box may need to be configured. First, check your CANBUS photo, then select the corresponding CANBUS type in the system settings.

Setup Steps:

  1. Connect the CANBUS box as shown in the picture.
  2. Navigate to Settings > Car Settings > Factory (Password: 8888).
  3. Select Car Model and choose the appropriate CANBUS type.

Cooling Fan Installation (M200S, M400S, M700S, M800S models)

The cooling fan helps prevent abnormal operation due to high temperatures. To enable it:

  1. Connect the cooling fan cable to the designated port on the device.
  2. Go to Settings > Factory (Password: 3368).
  3. Find and enable the cooling fan setting.
Comparison of car multimedia system temperatures with and without a cooling fan, showing significant temperature reduction with the fan
Figure 6: Cooling fan effectiveness comparison

ADAS DVR Installation

To install the ADAS DVR software:

  1. Connect the DVR via USB cable.
  2. Open FileManager on the device.
  3. Locate and install the uCarDvr.apk software.
  4. Once installed, the DVR app will be ready for use.
ADAS DVR anti-collision warning driving recorder features, including front vehicle distance prediction and lane departure warning
Figure 7: ADAS DVR features and installation steps

Operating Instructions

Device Power On/Off

The multimedia system automatically switches on when the ignition is turned on and the engine starts. The display will show the initial screen. The unit activates automatically after the engine is switched off.

Touch Screen Operation

The device features an interactive touchscreen. Ensure the protective plastic membrane is removed before first use.

  • Touch: Tap an item to start an application or select a menu option.
  • Double Tap: Quickly double-tap to resize images.
  • Touch & Hold: Press and hold an item for 2 seconds to access additional actions.
  • Dragging: Touch and hold an item, then drag it to a new position on the screen.
  • Moving: Rotate the screen by touching and moving your finger in the desired direction.
  • Scroll through: Move your finger on the screen in the desired direction and release to scroll.

Attention: Do not use metal or sharp objects on the touchscreen, and avoid excessive force.

Main Interface Customization

You can customize the position of icons and applications on the main interface for easy access.

  • Change Wallpaper: Long press on the main menu background to select a picture or photo from installed options or a USB memory device.
  • Launcher App Setting: The device supports multicolor illumination. You can set the light color or enable automatic color change via Settings > Launcher App Setting > Lantern settings.
Screenshot of the button light color settings interface on the car multimedia system
Figure 8: Button light color customization

FM/AM Radio

Access the radio by tapping the "Radio" icon on the main menu. Features include automatic and manual search, saving stations, and dragging icons to channel lists.

FM/AM RDS Radio interface showing frequency tuning, station list, and DAB+ support
Figure 9: FM/AM Radio interface

DSP Processor / Equalizer

Access the equalizer (EQ) via the "Equalizer" icon. The DSP chip allows for advanced sound settings:

  • Equalizer Mode: Adjust sound by frequency settings (32 bands). Presets like Rock, Soft, Jazz, Pop, Classical, Hall are available.
  • Automatic Volume Mode: Optimize sound for listener position (Driver, Passenger, Rear, Center).
  • Balance Mode: Adjust speaker volume ratios for comfortable sound.
DSP Processor settings for surround space, bass enhancement, field, and bass filter
Figure 10: DSP Processor sound settings

Multimedia Playback (Music / Video)

Connect a USB storage device or SD card to play music (MP3, WMA, WAV, OGG, FLAC) or videos (MP4, AVI, WMV, MOV, MKV, MPEG, RMVB). Video playback is restricted while the car is in motion for safety.

Bluetooth (BT) Function

Access the BT hands-free interface via the "BT" icon. Pair your phone by searching for new devices, confirming connection, and entering the password (0000). Supports A2DP for music streaming and BT address book transfer.

Car Link allows seamless integration of your iPhone or Android device. Connect your phone via BT (for wireless) or USB cable (for wired) and authorize the connection. This enables satellite navigation, calls, messages, and music playback.

Wireless Car-Play (iOS) and Wireless Auto (Android) connection steps
Figure 11: Car-Play and Android Auto connection guide

Split Screen Function

Display two applications simultaneously on the screen, e.g., navigation and music. To exit, drag the icon between the two screens to the right.

Split screen functionality showing map and music, map and online video, and picture-in-picture modes
Figure 12: Split screen modes

GPS Navigation

The system includes a built-in global positioning system supporting GPS, BDS, and GLONASS for accurate, real-time traffic display and navigation.

GPS Navigation interface displaying a map with real-time traffic conditions
Figure 13: GPS Navigation interface

4G LTE & 5GHz WiFi

The built-in 4G module allows connection to cellular networks. The device also supports 5GHz WiFi (802.11 b/g/n) for fast, stable, and wide-coverage internet access.

5GHz WiFi support with antenna connection details
Figure 14: 5GHz WiFi support
4G LTE module and SIM card insertion direction
Figure 15: 4G LTE module and SIM card slot

Steering Wheel Control

Take control of music and hands-free calling for safer driving. This head unit supports digital steering wheel control (SWC).

Steering wheel control functionality for music and calls
Figure 16: Steering Wheel Control

Additional Features (Optional Accessories)

The following features require additional accessories, which must be purchased separately:

  • DAB+ Radio: EU DAB+ radio for better sound quality and stronger signal.
  • OBD II: On-board diagnostics to monitor car status, real-time data, and fault codes.
  • TPMS: Tire Pressure Monitoring System for real-time tire pressure and temperature statistics.
  • AV Output (M200S, M400S, M700S, M800S): Output displayed content to rear headrest screens via RCA or HDMI for HD video and audio.
  • 360° Camera: Requires a built-in 360 Camera Chip on the motherboard.
  • AHD HD Reversing: Provides clearer rear-view video than ordinary cameras.

Maintenance

  • Screen Care: Use a special cleaning device to clean the touchscreen. Avoid harsh chemicals or abrasive materials.
  • Temperature Management: To prevent overheating, ensure the device is not exposed to direct sunlight for prolonged periods or installed near heat sources. If the vehicle interior is too hot, cool it down before operating the system. Similarly, at very low temperatures, allow the interior to warm up to normal operating temperature for optimal display performance.
  • Firmware Updates: Regularly check for and install official firmware updates to ensure optimal performance and access to new features.

Troubleshooting

If you encounter issues, try disconnecting and reconnecting your device. If the problem persists, use the Reset button. Refer to the table below for common malfunctions and solutions. If the issue is not resolved, consult your authorized dealer.

SymptomProbable CauseSolution
General Problems
Device does not power on.Ignition key not in "On" position.Turn the key to the "On" position.
Device does not power on.Overheated fuses (15A).Check circuit breaker; replace with a good one of the same nominal size if faulty.
Device does not power on.Incorrect connection of electrical supply wires (black and yellow).Check the connection of the electrical supply.
Bluetooth Problems
Phonebook contacts not transferred.No rights on the phone.After connecting, go to phone's BT settings and authorize phonebook transfer.

Technical Specifications

FeatureSpecification
Mounting Size9"/10"
Screen Resolution1280x720 IPS
Display Size9" and 10"
CPUUIS7862 1.8GHz 8-core (2 cores ARM cortex A75 + 6 cores ARM cortex A55)
RAMDDR3 2GB/3GB/4GB/6GB/8GB
ROM32GB/64GB/128GB
Operating SystemAndroid 11
Maximum Output Power4 x 45 W
Sound AmplifierTDA 7388/Toshiba 001 (M200S M300S), TDA7851/7850/7838 (M400S M500S M600S M700S)
Chip FM TunerNXP TEF6686
Features of the EqualizerLow Pass Filter, Tone Compensation, Balance Mode, Surround Sound Mode, Extended Equalizer settings (32 bands)
CarPlay / Android AutoSupported (add-on Car Link)
Video FormatRMVB, MKV, MOV, WMV, AVI, MPG, TS, H.264 codec and others.
Audio FormatMP3, WMA, WAV, OGG, FLAC
GPSBuilt-in receiver with external antenna
Software for NavigationSupport
Wi-FiSupport
360° CameraSupport
BTA2DP and BT address book transfer
Control of Steering Wheel ButtonsSupport
ADAS DVRActivation in the settings menu
AHD HD ReversingAutomatic activation of video input
4G Internet / 4G LTESupport
DSPSupport
Start Time16s ~ 20s
Voltage during OperationDC 12V
Voltage at Operating Range9V ~ 16V
Electric Current1.5A
Operating Temperature-20°C ~ +70°C
Main Menu LanguageSupport for multiple national languages

Physical Dimensions and Weight

  • Item Weight: 1.5kg
  • Item Size: 9 inch
  • Package Dimensions: Length: 37cm, Width: 31cm, Height: 17cm
  • Package Weight: 1.834kg

Warranty and Support

The product comes with a 365-day free replacement warranty. Terms and conditions apply. For any quality problems, please contact the seller to confirm the issue. After confirmation, return the item to the seller, and upon receipt, a new item will be sent.

365 Days free replacement warranty process: Buyer contacts seller, confirms quality problems, buyer returns item, seller receives return, seller sends new item
Figure 17: Warranty process for free replacement

For further assistance or to view the full user manual in PDF format, please refer to the official document: User Manual (PDF).

User Tips

  • Pre-Installation Check: Before starting installation, it is recommended to take a photo of your car's CD location and send it to the seller if you are unsure about compatibility.
  • SIM Card Insertion: When inserting the 4G SIM card, ensure the chip is facing the system module and the bevel is outward.
  • Optimal Performance: For models supporting a cooling fan, ensure it is properly installed and enabled in settings to maintain optimal operating temperature, especially in warmer climates.
  • Software Updates: Keep the system's software updated to benefit from the latest features and performance improvements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.