1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your new Fujitsu Air Conditioner Remote Control. Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity. This remote is designed to be a high-quality replacement or secondary control unit for various Fujitsu air conditioner models.
2. Setup
2.1 Battery Installation
Your remote control requires two AAA/R03/LR03 batteries (not included). Follow these steps to install them:
- Open the battery compartment cover located on the back of the remote control by sliding it downwards.
- Insert two AAA/R03/LR03 batteries, ensuring that the (+) and (-) polarities are aligned correctly as indicated inside the compartment.
- Close the battery compartment cover by sliding it upwards until it clicks into place.
Important: Do not mix old batteries with new ones. Do not use batteries of different types together.
3. Operating Instructions
Point the remote control directly at the air conditioner's receiver. Ensure there are no obstructions between the remote and the unit.
3.1 Button Functions
- START/STOP: Turns the air conditioner ON or OFF.
- AUTO/COOL/DRY/FAN/HEAT: Selects the operating mode.
- MASTER CONTROL: Cycles through main operating modes.
- SET TEMP ▲/▼: Adjusts the temperature setting.
- FAN CONTROL: Adjusts the fan speed (AUTO, HIGH, MED, LOW, QUIET).
- SET: Confirms settings or enters specific menus.
- SWING: Controls the louver swing direction.
- RESET: Resets the remote control settings.
- TIMER: Sets the ON/OFF timer function.
- SLEEP: Activates or deactivates sleep mode.
- ON/OFF (Timer): Used in conjunction with the TIMER button to set specific on/off times.
- CANCEL: Cancels current timer settings or other functions.
- COIL DRY: Activates the coil dry function to prevent mold growth.
- TEST RUN: Initiates a test run of the air conditioner (for service personnel or initial setup).
- ENERGY SAVING: Activates energy-saving mode.
4. Maintenance
Proper maintenance ensures the longevity and reliable operation of your remote control.
- Cleaning: Regularly clean the remote control with a soft, dry cloth to avoid button damage and accumulation of dust. Do not use liquid cleaners or abrasive materials.
- Environment: Avoid exposing the remote control to damp, high, or low-temperature environments. Extreme conditions can damage internal components.
- Battery Replacement: When the remote control batteries are depleted, replace them promptly with new AAA/R03/LR03 batteries. Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Drop Protection: The shell is made of high-strength ABS+PC alloy material, designed to resist wear and withstand drops from up to 1.5 meters. However, excessive force or repeated drops can still cause damage.
5. Troubleshooting
If you encounter issues with your remote control, try the following steps:
- Remote Not Responding:
- Check if the batteries are correctly inserted with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Make sure you are within the effective range of the air conditioner's IR receiver.
- Display Not Working:
- Check or replace batteries.
- If the display is faint, batteries may be low.
- Incorrect Temperature/Mode:
- Press the RESET button on the remote control to return to default settings.
- Ensure the correct mode (COOL, HEAT, FAN, DRY, AUTO) is selected.
If problems persist after attempting these troubleshooting steps, please contact customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | YXIXTZZG (Compatible with Fujitsu) |
| Model Numbers | AR-RCD1C, AR-RCD1E, AR-RCE1E, AR-RCE1C, AR-RCC2J, AR-RCG2J |
| Use | Air Conditioner |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 8 |
| Support APP | No |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package | No (Remote Controller only, batteries not included) |
| Material | High-strength ABS+PC alloy |
| Drop Test Resistance | 1.5 meters |
| Button Life Test | 100,000 presses |
| Product Weight | 0.2 kg |
| Package Dimensions (L x W x H) | 10 cm x 5 cm x 10 cm |
7. User Tips
- Optimal Range: For best performance, operate the remote control within 8 meters (26 feet) of the air conditioner and ensure a clear line of sight.
- Battery Life: To maximize battery life, avoid pressing buttons unnecessarily. Consider using rechargeable AAA batteries for environmental benefits.
- Display Clarity: If the display appears dim, it's a good indicator that the batteries are running low and should be replaced soon.
- Mode Selection: Familiarize yourself with the different operating modes (Cool, Heat, Dry, Fan, Auto) to efficiently manage your indoor climate.
- Energy Saving: Utilize the 'ENERGY SAVING' mode to reduce power consumption, especially during prolonged use.
8. Warranty and Support
For any questions, concerns, or technical support regarding your remote control, please do not hesitate to contact the seller or manufacturer directly. They are equipped to provide assistance and resolve any issues you may encounter.
Please retain your purchase receipt as proof of purchase for any support inquiries.
