K-Snake X10

Contents

K-Snake X10 Three-Mode Wireless Gaming Mouse User Manual

Model: X10 | Brand: K-Snake

Introduction

Thank you for choosing the K-Snake X10 Three-Mode Wireless Gaming Mouse. This advanced e-sports mouse offers versatile connectivity options (2.4G wireless, Bluetooth, and wired USB), a lightweight ergonomic design, adjustable DPI settings up to 10000, and customizable RGB lighting. This manual provides detailed instructions to help you set up, operate, and maintain your mouse for optimal performance.

Setup and Connection

The K-Snake X10 mouse supports three connection modes: 2.4G Wireless, Bluetooth, and Wired USB. Please follow the instructions below to connect your mouse.

1. Charging the Mouse

Before first use, or when the battery is low, connect the mouse to a USB power source using the provided Type-C cable. The mouse features a built-in 400mAh rechargeable battery.

K-Snake X10 mouse connected via Type-C cable for charging, highlighting the 400mAh rechargeable battery.
Figure 1: Charging the K-Snake X10 Mouse via Type-C

2. Connection Modes

Diagram showing three connection modes for the K-Snake X10 mouse: 2.4G wireless with USB receiver, Bluetooth, and wired Type-C. Benefits like low power consumption and low latency are noted.
Figure 2: Three-Mode Connection Options

2.1. 2.4G Wireless Mode

  1. Locate the USB receiver, usually stored in a compartment on the underside of the mouse.
  2. Plug the USB receiver into an available USB port on your computer.
  3. Turn on the mouse using the power switch on the bottom.
  4. The mouse should automatically connect to your computer.

2.2. Bluetooth Mode

  1. Turn on the mouse using the power switch on the bottom.
  2. Long press the mode switch button (refer to Figure 3 for button location) until the indicator light flashes, indicating pairing mode.
  3. On your computer or device, go to Bluetooth settings and search for new devices.
  4. Select "K-Snake X10" (or similar) from the list of available devices to pair.

2.3. Wired USB Mode

  1. Connect the provided Type-C cable to the front port of the mouse and the other end to a USB port on your computer.
  2. The mouse will automatically switch to wired mode and function as a plug-and-play device.

Operating Instructions

1. Button Functions

Diagram illustrating the button layout and functions of the K-Snake X10 mouse, including Left, Right, Middle, Forward, Backward, DPI switch, Mode switch, Bluetooth pairing, and Power switch.
Figure 3: Button and Function Description
  • Left Button: Standard left-click function.
  • Right Button: Standard right-click function.
  • Middle Button/Scroll Wheel: Scroll up/down, middle-click.
  • Forward Button: Navigates forward in web browsers or file explorers.
  • Backward Button: Navigates backward in web browsers or file explorers.
  • DPI Switch Button: Cycles through DPI settings.
  • Mode Switch Button (Short Press): Switches between 2.4G, Bluetooth, and Wired modes.
  • Mode Switch Button (Long Press): Initiates Bluetooth pairing.
  • Mouse Power Switch: Turns the mouse On/Off.

2. DPI Adjustment

The mouse features a 6-speed DPI adjustment, ranging from 800 to 10000 DPI. Press the DPI switch button to cycle through the available settings. Each DPI level is indicated by a different RGB lighting color.

Diagram showing the six-speed DPI adjustment levels (800, 1200, 2400, 3600, 6400, 10000) and their corresponding RGB lighting colors.
Figure 4: Six-Speed DPI Adjustment and RGB Indicators

3. RGB Lighting

The K-Snake X10 mouse features cool colorful RGB lighting. The lighting effects can be adjusted through the dedicated web cloud driver software (see section 4). The RGB lighting also serves as an indicator for DPI settings and connection modes.

Image of the K-Snake X10 mouse showcasing its cool colorful LED light, with a rainbow color wheel icon indicating adjustable lighting effects.
Figure 5: Cool Colorful LED Light

4. Web Cloud Driver

For advanced customization, including custom button assignments, macro recording, and detailed RGB lighting control, download and install the X10 Web Cloud Driver. This driver allows for a personalized gaming and office experience.

Screenshot of the X10 Web Cloud Driver interface, showing options for DPI settings, custom button assignments, and macro recording.
Figure 6: X10 Web Cloud Driver Interface

The driver can be accessed via the following URL: https://z0d21.yjx2012.com/

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the mouse.
  • Battery Care: To prolong battery life, avoid fully discharging the mouse frequently. Recharge when the low battery indicator appears.
  • Storage: Store the mouse in a cool, dry place away from direct sunlight and extreme temperatures.
  • USB Receiver: When not in use, store the USB receiver in its designated compartment on the mouse to prevent loss.

Troubleshooting

  • Mouse not responding:
    • Ensure the mouse is turned on.
    • Check battery level and charge if necessary.
    • For 2.4G mode, ensure the USB receiver is securely plugged in and try a different USB port.
    • For Bluetooth mode, ensure Bluetooth is enabled on your device and the mouse is properly paired. Try re-pairing.
    • For wired mode, ensure the Type-C cable is securely connected to both the mouse and the computer.
    • Try restarting your computer.
  • DPI not changing:
    • Press the DPI switch button firmly.
    • If using the web cloud driver, ensure settings are applied correctly.
  • RGB lighting not working or incorrect:
    • Check the mouse's power status.
    • If customized via the web cloud driver, verify the settings.
  • Lag or intermittent connection:
    • Ensure the mouse is within range of the receiver (for 2.4G) or Bluetooth device.
    • Minimize interference from other wireless devices.
    • Ensure the mouse is fully charged.
    • For 2.4G, try plugging the receiver into a USB port closer to the mouse.

Specifications

Table of parameters for the K-Snake X10 mouse, detailing model, weight, buttons, battery, dimensions, DPI range, colors, and connection methods.
Figure 7: K-Snake X10 Product Parameters
FeatureDetail
ModelX10
Product Weight71g ± 5g
Number of Buttons7
Battery400mAh Rechargeable Battery
Product Dimensions121mm (L) x 64mm (W) x 39mm (H) ± 1mm
DPI Adjustment6-speed (800-10000 DPI)
Product ColorsBlack, Grey, Orange
Connection Method2.4G Wireless, Bluetooth, Wired (Type-C)
Return Rate1000Hz (Wired/2.4G), 125Hz (Bluetooth)
Interface TypeUSB
Power TypeRechargeable

User Tips

  • Ergonomic Comfort: The X10 mouse is designed for comfortable control, fitting the hand shape to prevent fatigue during long periods of use.
  • Lightweight Design: Its lightweight hollow-out design enhances agility and reduces strain, making it ideal for extended gaming sessions or office work.
  • Versatile Connectivity: Utilize the 2.4G wireless mode for high-speed gaming with a 1000Hz return rate, Bluetooth for general use and portability, or wired mode for a stable, zero-latency connection.
  • Customization: Take advantage of the web cloud driver to fine-tune DPI settings, program buttons, and create macros for a truly personalized experience.

Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or retailer from whom you purchased the K-Snake X10 mouse. Please retain your proof of purchase for warranty purposes.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.