1. Introduction
Thank you for choosing the NEEWER Q4PRO 400Ws 2.4G TTL Flash. This powerful and versatile studio flash is designed for professional photographers, offering advanced features such as 400Ws output, 2.4G wireless control, TTL automatic flash mode, 1/8000s High Speed Sync (HSS), and a 30W modeling lamp. This manual provides detailed instructions to help you get the most out of your Q4PRO flash.

2. Package Contents
Please check the package to ensure all items are present:
- 1x NEEWER Q4PRO Flash Unit
- 1x Flash Tube
- 1x Standard Reflector
- 1x Lithium Battery (2800mAh)
- 1x Battery Charger
- 1x Power Cord
- 1x Protective Cover
- 1x Carry Case
3. Setup Guide
3.1 Installing the Flash Tube
- Ensure the flash unit is powered off.
- Carefully align the pins of the flash tube with the sockets on the flash head.
- Gently push the flash tube into place until it clicks securely.
3.2 Attaching the Reflector and Protective Cover
- To attach the reflector, align its mounting points with the flash head and twist clockwise until locked.
- For transport or storage, attach the protective cover in the same manner.
3.3 Battery Installation and Charging
- Insert the 2800mAh Lithium Battery into the battery compartment on the rear of the flash unit. Ensure it is seated correctly.
- To charge the battery, connect the charger to a power outlet and then to the battery. The charging indicator will show the status.

4. Operating Instructions
4.1 Powering On/Off and User Interface
Press and hold the power button to turn the unit on or off. The Q4PRO features dual color TFT screens for a clear and intuitive user interface. Color groups A-E are used for distinct display and group management.

4.2 Flash Modes
The Q4PRO supports TTL, Manual (M), and Multi (Stroboscopic) flash modes.
- TTL Automatic Flash Mode: Automatically adjusts flash output for correct exposure. Supports ±3 stops of exposure compensation in 1/3 stop increments for fine-tuning.
- Manual (M) Mode: Allows manual control over flash power output from 1/1 to 1/256.
- Multi (Stroboscopic) Mode: Fires a series of rapid flashes during a single exposure to capture multiple movements of a subject.

4.3 High Speed Sync (HSS)
The Q4PRO supports HSS up to 1/8000s. Use HSS when shooting in bright ambient light or with a wide aperture to prevent overexposure and achieve clear fill light on your subject. This mode is also useful for freezing fast motion.
4.4 High Speed Continuous Shooting Mode
This mode allows you to shoot continuously, frame by frame, to precisely record fleeting motions. Access this mode through the menu settings.

4.5 Modeling Lamp
The integrated 30W LED modeling lamp has a color temperature of 5600K±200K and adjustable brightness from 10% to 100%. Use it to preview lighting effects before flashing.

4.6 2.4G Remote Triggering and App Control
The Q4PRO features built-in 2.4G wireless capabilities for remote triggering and app control.
- Remote Triggering: Works with QPRO triggers (not included) for easy connection. It is also compatible with Godox 2.4G X SYSTEM and SEKONIC L-858D Light Meter (RT-GX modules) in RX (receiver) mode.
- App Wireless Control: Use the NEEWER app for easy and quick parameter adjustments, group management, and firmware updates. Ensure your flash has the latest firmware for optimal compatibility.
Note: NEEWER Q and Godox X systems cannot be used at the same time.

4.7 Mask Function
The Mask Function allows for separate exposure of the background and subjects, which can be useful for compositing or achieving specific creative effects.
5. Maintenance
- Keep the flash unit dry. Do not handle with wet hands.
- Clean the flash tube and reflector regularly with a soft, dry cloth to ensure optimal light output and prevent dust buildup.
- Store the unit in its carry case when not in use to protect it from dust and physical damage.
- Avoid extreme temperatures and humidity.
- When replacing the flash tube, ensure the unit is powered off and cooled down. Handle the new tube carefully to avoid touching the glass directly.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash not firing | Low battery; Incorrect trigger settings; Flash in sleep mode; Overheat protection activated. | Charge battery; Check trigger and flash channel/group settings; Wake flash by pressing a button; Allow flash to cool down. |
| Inconsistent flash output | Dirty flash tube; Battery low; Incorrect power settings. | Clean flash tube; Charge battery; Verify manual power settings or TTL compensation. |
| Wireless control not working | Incorrect channel/group; Out of range; Interference; Firmware outdated. | Ensure trigger and flash are on same channel/group; Move closer; Avoid sources of interference; Update firmware via app. |
| Modeling lamp not working | Lamp off; Brightness set to 0%; Overheat protection. | Turn on modeling lamp; Adjust brightness; Allow unit to cool. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | Q4PRO |
| Flash Power | 400Ws |
| Flash Modes | TTL/M/Multi |
| Sync Mode | HSS (up to 1/8000s), First Curtain Sync, Second Curtain Sync |
| Flash Duration (t0.1) | 1/28570s (min), 1/200s (max) |
| Recycle Time | 0.1-2.5s |
| Full Power Flashes | 380 |
| Flash Exposure Compensation (FEC) | ±3 stops (1/3 stop increments) |
| 2.4G Wireless Flash | Master, Slave, Off |
| Wireless ID | 01-99 |
| Channels | 32 (1-32) |
| Groups | 5 (A, B, C, D, E) |
| Transmission Range | 100m / 328ft |
| Modeling Lamp | 30W LED, 5600K±200K, 10-100% adjustable brightness |
| Color Temperature (Flash) | 6000K±100K |
| Color Temperature (Modeling Lamp) | 5600K±200K |
| Battery Capacity | 2800mAh / 14.8V / 41.44Wh |
| Power Output | 1/1 to 1/256 |
| Dimensions (with reflector) | 23.5 x 11.5 x 18cm / 9.25 x 4.53 x 7.09 inches |
| Weight (with battery and reflector) | 2.1kg / 4.63lbs |
8. User Tips
- Always ensure the battery is fully charged before a shoot to avoid interruptions.
- Familiarize yourself with the app control for quick adjustments and firmware updates, which can enhance compatibility and performance.
- When using wireless triggering, double-check that your trigger and flash are set to the same channel and group.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official NEEWER website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.