Saramonic Air Wireless Lavalier Microphone User Manual

Important Safety Information and Statement

Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: info@saramonic.com

Cautions

1. Disintegration of this device by non-professionals is strictly prohibited.
2. Please keep it away from heat sources such as heaters or ovens.
3. Do not remove the battery without professionals' help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from the dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

General Introduction

The Saramonic Blink500T2 (Saramonic Air) is an incredibly lightweight and easy-to-use 2.4GHz wireless microphone system designed for up to two people, delivering exceptional, broadcast-quality sound. It features built-in rechargeable batteries, providing long battery life (up to 12 hours for the transmitter (TX) and 14 hours for the receiver (RX)). The clip-on design allows for easy attachment to clothing. The system boasts an unobstructed operating range of up to 100 meters (328 feet).

The small and light TX transmitter includes mute and noise cancellation capabilities, a built-in omnidirectional microphone with 360-degree sound pickup, and can also be used with the included SR-M1 professional lavalier microphone. This makes the Blink500T2 TX ideal for video productions, interviews, speeches, and other applications requiring natural-sounding dialogue.

The dual-channel RX receiver offers selectable Mono/Stereo output settings. A 3.5mm headphone jack enables real-time monitoring, and the 3.5mm TRS output ensures compatibility with smartphones, tablets, computers, DSLRs, mirrorless cameras, camcorders, recorders, and mixers.

No technical audio knowledge is required for operation. The Blink500T2 system operates on the interference-free 2.4GHz spectrum, automatically hopping to free channels to avoid static noise and audio dropouts.

Image: Professional Audio Quality features including 20Hz-20KHz Frequency Response, 90dB SNR, 120dB SPL, and 48 KHz/24 Bit Sampling Rate.

Image: Demonstrates 984ft stable transmission and 25ms ultra-low lag for reliable audio sync.

Packing List

The Saramonic Air system comes in two main configurations: Saramonic Air-01 and Saramonic Air-02. Please check your package contents against the list below.

Saramonic Air-01 Package Contents

Image: Contents of the Saramonic Air-01 package.

• Receiver * 1
• Transmitter * 2
• Charging box * 1
• Type C adapter * 1
• USB-C to USB-A cable * 1
• 3.5 mm TRS to TRS cable * 1
• RX back clip * 1
• Windproof fur cover * 2
• Magnet * 2
• Storage bag * 1

Saramonic Air-02 Package Contents

Image: Contents of the Saramonic Air-02 package, including lavalier mics.

• Transmitter * 2
• Receiver * 1
• Lavalier Mic * 2
• Charging case * 1
• 3.5 mm TRS to TRS cable * 1
• USB-C to USB-A cable * 1
• USB-C adapter * 1
• Fur Windshield * 2
• Magnetic * 2
• Receiver clip * 1
• Storage bag * 1
• Silicone plug * 1

Other Adapter Cables (Sold Separately)

Following adapter cables are available for needs of audio output with Lightning/Type-C connector:

• 3.5mm TRS Male Jack to Lightning Audio Adapter Cable (SR-C2000)
• 3.5mm TRS Female Jack to Lightning Audio Adapter Cable (SR-C2018)
• 3.5mm TRS Male Jack to Type-C Audio Adapter Cable (SR-C2001)
• 3.5mm TRS Female Jack to Type-C Audio Adapter Cable (SR-C2003)

Product Structure

Blink500T2 TX: Clip-on Transmitter with Built-in Microphone

Image: Diagram of the Blink500T2 TX Transmitter with labeled parts.

1. Power Button: Long press for 2 seconds to power ON/OFF. Short press for Mute ON/OFF. Long press for 5 seconds in shutdown mode for pairing.
2. Status Indicator: Displays power, pairing status, mute status, noise cancellation status, gain level, low battery, charging status.
3. +/- / NR Button: Press +/- to adjust mic gain (7 levels). Press both +/- simultaneously for Noise Cancellation ON/OFF.
4. Mic in Jack: Connects to a 3.5mm TRS microphone (e.g., included lavalier mic).
5. USB-C Charging Port (DC 5V): For charging the unit.
6. Built-in Microphone
7. Belt Clip

Blink500T2 RX: Clip-on and Shoe-Mountable Receiver

Image: Diagram of the Blink500T2 RX Receiver with labeled parts.

1. Power Button: Long press for 2 seconds to power ON/OFF. Short press for Mute ON/OFF. Long press for 5 seconds in shutdown mode for pairing.
2. Status Indicator: Displays power, pairing status, mute status, low battery, charging status.
3. Mono/Stereo Switch: Selects mono (mixed audio from left/right channels) or stereo (transmitters' audio separated to left/right).
4. USB-C Charging Port (DC 5V): For charging the unit.
5. LINE OUT Jack: Connects to camera, smartphone, computer, mixer, or amplifier.
6. 3.5mm Headphones Output: Connect headphones for audio monitoring.
7. Belt Clip

Setup and Operating Guide

1. Power On/Off

• Long press the power button for 2 seconds on both the transmitter (TX) and receiver (RX) to turn them ON or OFF.

2. Pairing

The system is pre-paired from the factory. It should connect automatically upon power-on. If they are disconnected, follow these steps:

1. Long press the power button of both TX and RX for 5 seconds while in shutdown mode. They will enter pairing mode, and their indicators will blink blue 3 times rapidly.
2. The transmitter and receiver will successfully pair within 10 seconds. Their indicators will then light up static blue.

Note:

• If a specific transmitter fails to pair, turn off any already paired transmitters, then attempt to re-pair the specific transmitter and receiver.

3. Connecting to Recording Devices

• For cameras, recorders, or mixers: Connect the receiver's LINE OUT jack to the mic input of your device using the supplied 3.5mm TRS to TRS cable.
• For smartphones, tablets, or computers: Connect the receiver's LINE OUT jack to your device using the supplied 3.5mm TRS to TRRS cable (or appropriate adapter, sold separately, for Lightning/USB-C ports).

4. Audio Monitoring

• Plug headphones into the 3.5mm Headphones Output jack on the receiver for real-time audio monitoring.

5. Adjusting Mic Gain and Noise Cancellation

• Mic Gain: Use the +/- buttons on the transmitter to adjust the microphone gain (7 levels available). Settings are retained even after power off. Long press or continuously press +/- for maximum/minimum gain.
• Noise Cancellation (NC): Press both the "+" and "-" buttons on the transmitter simultaneously to toggle noise cancellation ON/OFF. The default setting is OFF.

Image: Various ways to wear the microphone, including using the LAV MIC, magnetic attachment, and clip.

Image: Illustrates universal compatibility with USB-C devices (iPhone 15/16, Android, Laptops, Tablets) and cameras (3.5mm TRS output).

Image: Shows the auto power sync feature with a camera, including auto wake-up and shut-down.

Image: Demonstrates real-time audio monitoring using headphones connected to the receiver.

Image: Close-up of the 1.05" OLED Color screen, showing audio levels, battery status, pairing, and noise cancellation settings.

Image: Illustrates the double-tap shoot control feature on the transmitter for compatible cell phones.

Image: Shows how one receiver can link to two devices simultaneously for recording.

Image: Explains the difference between Mono mode (concentrated sound) and Stereo mode (wide scenes, layered listening experience).

Image: Shows the Saramonic Central app interface for intelligent control and adjustment of microphone settings.

User Tips

• Noise Suppression: The system offers two noise cancellation modes: "Light NC" to minimize indoor noise while preserving ambient sound, and "Strong NC" for background-free voice clarity. Experiment with both to find the best setting for your environment.
• Optimal Placement: For the best sound pickup, avoid holding your hand over the microphone capsule cover. Utilize the belt clip or magnetic attachment for discreet and effective placement on clothing.
• Monitoring Audio: Always use headphones connected to the receiver's 3.5mm jack to monitor your audio in real-time. This allows for immediate adjustments to gain or noise cancellation, ensuring optimal recording quality.
• Range Awareness: The wireless range is up to 100 meters (328 feet) in unobstructed environments. Be mindful of physical barriers like walls and buildings, which can attenuate the signal.
• EQ Customization: Use the Saramonic Central app to fine-tune your sound with the 3-Band EQ customization, allowing you to boost lows, enhance highs, and optimize vocals to fit your style.

Image: Illustrates the 3-Band EQ customization feature accessible via the Saramonic app, allowing users to boost lows, enhance highs, and optimize vocals.

Troubleshooting

• Pairing Issues: If a transmitter fails to pair, ensure all other paired transmitters are turned off, then attempt to re-pair the specific transmitter and receiver.
• Signal Interference/Dropouts: The 2.4GHz wireless frequency can be susceptible to interference. Try to avoid obstacles like walls and buildings. Keep the system away from other 2.4GHz devices such as high-power Wi-Fi antennas and radios.
• Low Battery: The status indicator will blink red slowly when the battery is low. Charge the transmitter or receiver promptly. If a transmitter is in low battery status, it will automatically shut off within 10 minutes.
• Distorted Audio: If audio sounds distorted, especially in loud environments, ensure the Smart Limiter feature is enabled. This helps prevent clipping and maintains clear audio.
• No Audio Monitoring: Check headphone connections and ensure the volume on your monitoring device (if applicable) is adequate.

Image: Explains the Dual Safe Audio Guard feature, including a limiter to prevent clipping and a -6dB safety track for managing loud audio.

Specifications

Maintenance

• Cleaning: Clean the device with only a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Storage: When storing, keep the device away from dust and moisture. Store in a cool, dry place.
• Battery Care: Do not attempt to remove or replace the built-in battery without professional assistance. Charge the device regularly to maintain battery health, especially if storing for extended periods.

Image: The transparent metal charging case displaying battery life for RX (9.5h screen on, 6.5h screen off), TX (10h), and total with charging case (25h).

Warranty and Support

For technical support or warranty inquiries, please contact your retailer or email Saramonic directly at info@saramonic.com.

For a better recording experience, the application SmartRecorder is recommended. You can scan the QR code in the original PDF manual for more information or to follow Saramonic on WeChat.

A detailed user manual in PDF format is available for download: Saramonic Blink500T2 User Manual (PDF).

Manufacturer Contact Information:
Shenzhen Jiayz Photo Industrial., Ltd
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley, Power, Guanlan, Longhua District, Shenzhen, China
Phone: 400-613-1096
Website: www.saramonic.com