KADAX Rainwater Collector With Valve 100mm Graphite

Contents

KADAX Rainwater Collector with Valve 100mm Graphite User Manual

Model: Rainwater Collector With Valve 100mm Graphite

1. Introduction

The KADAX Rainwater Collector with Valve 100mm Graphite is designed to efficiently harvest rainwater from your downpipes. This accessory allows you to collect and store rainwater for various uses, such as garden irrigation, reducing your reliance on tap water. Its robust ABS plastic construction ensures durability and resistance to various weather conditions.

KADAX Rainwater Collector components and assembled view.
Figure 1: Overview of the KADAX Rainwater Collector components and assembled view.

2. Components

The KADAX Rainwater Collector system typically includes the following parts:

  • Main collector body (downpipe section)
  • Valve assembly with adjustable water flow control
  • Outlet connection (3/4" thread)
  • Connecting pipe sections
  • Cap for valve assembly
Top view of the KADAX Rainwater Collector inlet, showing 100mm diameter.
Figure 2: Close-up of the 100mm diameter inlet.

3. Specifications

Feature Detail
Brand KADAX
Model Rainwater Collector With Valve 100mm Graphite
Material ABS Plastic
Color Graphite
Downpipe Diameter Compatibility 100 mm (approx. 10.5 cm outer diameter)
Overall Height 18 cm
Valve Assembly Length 19 cm
Valve Assembly Diameter 41 mm
Outlet Connection 3/4" thread
Total Length (assembled) 29.5 cm
Weight 260 g
Pipe Compatibility PVC and Metal pipes
Detailed dimensions of the KADAX Rainwater Collector.
Figure 3: Detailed dimensions of the rainwater collector.

4. Setup and Installation

The KADAX Rainwater Collector is designed for simple and intuitive assembly. Follow these steps for proper installation:

  1. Choose Location: Select a suitable section of your downpipe where you wish to install the collector. Ensure it is at an appropriate height for your rainwater storage container.
  2. Measure and Cut: Carefully measure the section of the downpipe that needs to be removed to accommodate the main collector body. The collector is designed for 100mm diameter downpipes. Cut the downpipe cleanly.
  3. Insert Collector Body: Place the main collector body into the cut section of the downpipe. Ensure a snug fit.
  4. Assemble Valve Section: Connect the valve assembly components as shown in the diagrams. This typically involves attaching the adjustable valve to the side outlet of the main collector body.
  5. Connect to Storage: Attach a hose or pipe to the 3/4" threaded outlet of the valve assembly, leading to your rainwater storage barrel or tank.
  6. Secure Connections: Ensure all connections are tight and secure to prevent leaks.
Step-by-step assembly diagram for the KADAX Rainwater Collector.
Figure 4: Assembly diagram showing the connection of the valve section to the main collector body.
Assembly diagram of the KADAX Rainwater Collector attached to a downpipe.
Figure 5: Illustration of the collector installed on a downpipe.

5. Operation

The KADAX Rainwater Collector features a built-in valve for controlling water flow:

  • Water Collection: When the valve is open, rainwater flowing down the downpipe will be diverted into the collector and then through the outlet to your storage container.
  • Adjusting Flow: The internal, sealed valve allows for precise adjustment of the water flow. Turn the valve handle to regulate the amount of water diverted.
  • Stopping Collection: To stop collecting water (e.g., when your barrel is full or during winter to prevent freezing), close the valve. This will allow rainwater to continue flowing down the downpipe as normal.
Close-up of the KADAX Rainwater Collector valve and outlet.
Figure 6: Close-up view of the adjustable valve and 3/4" outlet.

6. Maintenance

To ensure the longevity and efficient operation of your KADAX Rainwater Collector, consider the following maintenance tips:

  • Regular Inspection: Periodically check the collector and all connections for any debris, leaves, or blockages that might impede water flow.
  • Cleaning: Clean the collector and valve assembly as needed, especially after heavy rainfall or if you notice reduced efficiency. Use mild soap and water if necessary.
  • Winterization: In regions with freezing temperatures, it is recommended to close the valve and disconnect any hoses leading to storage containers to prevent ice buildup and potential damage to the collector or pipes.
  • Material Care: The ABS plastic is moisture-resistant and durable, but avoid using harsh chemicals or abrasive cleaners that could damage the material.

7. Troubleshooting

Here are some common issues and their potential solutions:

  • Reduced Water Flow:
    • Check if the valve is fully open.
    • Inspect the collector and downpipe for blockages (leaves, twigs, etc.).
    • Ensure the hose leading to the storage container is not kinked or blocked.
  • Leaks at Connections:
    • Ensure all pipe connections are securely fitted.
    • Check for any cracks or damage to the collector body or valve assembly.
    • Verify that the downpipe diameter matches the collector's specifications.
  • No Water Collection:
    • Confirm the valve is in the open position for collection.
    • Check if the downpipe is clear and rainwater is actually flowing.

8. User Tips

No specific user tips are available from reviews or Q&A at this time. However, general advice for rainwater harvesting includes:

  • Consider installing a pre-filter or mesh screen in your downpipe above the collector to prevent larger debris from entering the system.
  • Ensure your rainwater storage container is clean and covered to prevent algae growth and insect breeding.
  • Regularly check the water quality if using for sensitive plants or other specific applications.

9. Warranty and Support

For information regarding warranty, returns, or technical support, please refer to the seller's policies or contact KADAX customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.