MONSTER MQT65

Contents

Monster MQT65 OWS Bluetooth Ear Clip Headphones

Model: MQT65 | Brand: MONSTER

Introduction

The Monster MQT65 OWS Bluetooth Ear Clip Headphones are designed to provide a comfortable, high-fidelity audio experience with the convenience of wireless technology. Featuring an open-ear clip design, Bluetooth 6.0 connectivity, ENC noise reduction, and IPX5 waterproofing, these earbuds are ideal for sports, daily calls, commuting, and general music enjoyment. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Monster MQT65 OWS Bluetooth Ear Clip Headphones in white charging case
Monster MQT65 OWS Bluetooth Ear Clip Headphones with key features highlighted: Bluetooth 6.0, ENC noise reduction, comfortable to wear, ultra-light ear clip, IPX5 waterproof.

Setup

1. Charging Your Headphones

Before first use, ensure your Monster MQT65 headphones and charging case are fully charged.

  • Place the earbuds into the charging case.
  • Connect the charging case to a power source using the provided Type-C charging cable.
  • The indicator light on the charging case will show charging status. A full charge takes approximately 1.5 hours for the case.
  • The earbuds themselves have a battery capacity of 25mAh each, and the charging case has a 220mAh capacity, providing up to 24 hours of total usage time.
Hands holding the Monster MQT65 charging case, showing 220mAh battery capacity
The charging case has a 220mAh battery capacity, extending the earbuds' usage time.
Diagram showing 220mAh charging case and 4 hours single earphone play time
Battery life: approximately 24 hours with the charging case, and about 4 hours for a single earphone. Data from Monster Lab at 50% volume.

2. Bluetooth Pairing

Follow these steps to pair your Monster MQT65 headphones with your device:

  1. Open the charging case. The earbuds will automatically enter pairing mode.
  2. On your device (smartphone, tablet, computer), enable Bluetooth.
  3. Search for "Monster MQT65" in the list of available Bluetooth devices.
  4. Select "Monster MQT65" to connect. Once connected, you will hear a confirmation tone.
  5. The headphones utilize Bluetooth 6.0 Flash Connection technology for fast and stable pairing.
Bluetooth 6.0 Flash Connect technology diagram showing increased transmission speed and improved anti-interference
Bluetooth 6.0 Flash Connect technology offers 88% increased transmission speed and 138% improved anti-interference for a stable connection.

Operating Instructions

Wearing the Earbuds

The MQT65 features an ultra-light ear clip design for comfortable and secure wear. The C-bridge uses double-layer zero-degree silicone and has built-in flexible memory steel wire, ensuring a secure fit that has been tested over 19,999 times for optimal comfort.

Woman wearing Monster MQT65 ear clip headphones, illustrating comfortable experience
The ear clip design provides a comfortable listening experience.
Diagram showing secure fit and soft comfortable design of the ear clip headphones
Comfort test over 19,999 times, resulting in 99% improved fit and comfort. Features a C-bridge with double-layer silicone and flexible memory steel wire.
Diagram showing the imported skin-friendly memory steel wire and high-quality antibacterial TPU material
The earbuds are made with high-quality antibacterial TPU material and imported skin-friendly memory steel wire, which is durable and can be twisted without deformation.

Touch Controls

The Monster MQT65 headphones feature intuitive touch controls on each earbud. Refer to the diagram below for specific functions:

Diagram illustrating touch controls for Monster MQT65 headphones
Control Functions:
  • Tap 1: Left ear volume minus (L), Right ear volume plus (R)
  • Tap 2 times: Pause/play, Answer/hang up calls
  • Tap 3 times: Previous song on left ear (L), Next song on right ear (R)
  • Long press for 2 seconds: Reject call (L), Left ear voice assistant (L), Right ear game mode (R), Right ear music mode (R)

Sound Features

  • Hi-Fi Fidelity: Experience full-band original sound with the permanent magnet audio unit and composite three-material diaphragm.
  • ENC Dual Microphone Noise Reduction: Intelligent noise reduction technology identifies and filters out over 88% of background noise, improving call clarity by 86%.
  • New Sound Wave Directional Focusing Technology: Reduces sound leakage by more than 95% in daily use, ensuring privacy and an immersive listening experience.
Diagram of the permanent magnet audio unit components for full-band original sound experience
Permanent magnet audio unit with BIO-DIAPHRAGM and MAGNETIC-PL permanent magnet dynamic unit for a full-band original sound experience.
Diagram showing ENC dual microphone noise reduction technology with ambient noise reduction and improved call clarity percentages
ENC dual microphone noise reduction reduces ambient noise by 88% and improves call clarity by 86%.
Diagram illustrating new sound wave directional focusing technology reducing sound leakage
New sound wave directional focusing technology reduces sound leakage by over 95% for enhanced privacy and listening experience.

Maintenance

Cleaning and Care

  • The Monster MQT65 earbuds are IPX5 waterproof, meaning they are resistant to water splashes and sweat. You can wipe them clean with a soft, damp cloth after use, especially after workouts.
  • Important: The charging case is NOT waterproof. Do not expose the charging case to water or excessive moisture.
  • Avoid using harsh chemicals or abrasive materials for cleaning.
  • Store the headphones and charging case in a cool, dry place when not in use.
Monster MQT65 earbuds with water droplets, indicating IPX5 water and sweat resistance
The earbuds are IPX5 water and sweat resistant, suitable for sports and travel. Note that the charging case is not waterproof.

Troubleshooting

If you encounter any issues with your Monster MQT65 headphones, please refer to the following common solutions:

  • No Sound/Cannot Pair:
    • Ensure both earbuds are charged.
    • Turn off and on your device's Bluetooth, then try pairing again.
    • Reset the earbuds (refer to manufacturer's specific reset instructions if available, otherwise place them back in the case and close/open).
    • Ensure the earbuds are within the 10-meter transmission range of your device.
  • One Earbud Not Working:
    • Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again.
    • Check if both earbuds are charged.
    • Try re-pairing the earbuds with your device.
  • Charging Issues:
    • Ensure the charging cable is securely connected to both the case and the power source.
    • Try a different charging cable or power adapter.
    • Clean the charging contacts on the earbuds and inside the case with a dry cotton swab.
  • Poor Call Quality:
    • Ensure the earbuds are properly positioned in your ears.
    • Move closer to your connected device to avoid interference.
    • Check for any obstructions between the earbuds and your device.

Specifications

Monster MQT65 Product Parameters
AttributeValue
ModelMQT65
Brand NameMONSTER
Bluetooth VersionV6.0
CommunicationWireless
StyleOWS ear clip headphones
Connection Range≥10M (Up to 10 meters / 33 feet)
Headset Battery Capacity25mAh*2 (25mAh per earphone)
Headphone Compartment Battery Capacity220mAh
Play Time (Earbuds)About 4 hours (single earphone)
Usage Time (with charging box)About 24 hours
Charge TimeAbout 1.5 hours
Charging PortType-C
InputDC 5V/220mA
Weight of a single earphone3.5g
Waterproof RatingIPX5 (earbuds only)
Vocalism PrincipleDynamic
Frequency Response Range20 - 20000 Hz
Sensitivity125 dB
Resistance32 Ω
Impedance Rangeup to 32 Ω
Max Output10 mW
Total Harmonic Distortion1%
FeaturesWith Microphone, Active Noise-Cancellation (ENC), Volume Control, Control Button, Sound Isolating
Package ListUser Manual, Charging case, Charging Cable
MaterialPlastic (High-quality antibacterial TPU material for ear clip)

Note: All technical information is subject to actual performance and may vary depending on usage conditions.

Warranty and Support

Your Monster MQT65 OWS Bluetooth Ear Clip Headphones come with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or the official Monster customer service. Keep your purchase receipt as proof of purchase.

Package Contents:

  • 2 x Bluetooth Earphones
  • 1 x Charging Case
  • 1 x Charging Cable (Type-C)
  • 1 x User Manual (this document)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.