YANFU Thin84

Contents

ColorReco Thin84 Mechanical Keyboard User Manual

Model: Thin84

Introduction

Welcome to the ColorReco Thin84 Mechanical Keyboard user manual. This guide provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new low-profile, dual-mode wireless keyboard. Designed for efficiency and comfort, the Thin84 offers seamless connectivity across various operating systems and devices.

ColorReco Thin84 Mechanical Keyboard with key features highlighted
The ColorReco Thin84 keyboard, showcasing its slim design, aluminum alloy material, multi-device connectivity, adjustable backlight, comfortable typing, and MacOS function keys.

Setup

The ColorReco Thin84 supports both Bluetooth wireless and USB-C wired connections, allowing you to easily switch between different devices and usage scenarios.

1. Initial Power On & Bluetooth Mode

  1. Locate the power switch at the top of the keyboard. Move the switch to the "bluetooth" position.
  2. The power LED will light up red for approximately 3 seconds and then turn off.

2. Bluetooth Pairing

  1. After turning on the keyboard in Bluetooth mode, long press the Fn + Q, W, or E keys for about 3 seconds. This will activate the Bluetooth pairing mode for one of the three available channels.
  2. The LED indicator will start flashing white, indicating it's ready for pairing.
  3. On your host device (computer, tablet, phone), go to Bluetooth settings and select the ColorReco Thin84 keyboard to connect.
  4. To pair with additional devices, repeat the process using a different Fn + Q/W/E key combination. The keyboard can connect to 3-4 devices simultaneously.

3. Wired Mode Connection

  1. Connect the included USB-C cable to the keyboard's USB-C port and to your computer.
  2. The keyboard supports wired connection without an indicator light when the switch is turned to "cable" mode.

4. Charging the Keyboard

  1. Use the included USB-C charging cable to connect the keyboard to a power supply.
  2. Charge for 4-6 hours, or until the red charging light turns green.
  3. When the battery is low, the power indicator will flash red.

5. System Mode Switching

The keyboard supports specific function key layouts for different operating systems:

  • For Windows System Mode: Press Fn + A.
  • For MacOS System Mode: Press Fn + S.
Diagram showing steps for keyboard setup, charging, and system mode switching
Visual guide for initial setup, Bluetooth pairing, charging, and switching between Windows and MacOS system modes.

Operating Instructions

1. Backlight Control

The Thin84 features a colorful RGB backlight with 19 different lighting effects. You can switch between these effects at will to customize your desktop experience.

ColorReco Thin84 keyboard displaying colorful RGB backlight effects
The keyboard illuminated with its vibrant RGB backlight, demonstrating the customizable lighting effects.

2. Function Keys and Hotkeys

The keyboard is equipped with MacOS and iOS designed function hotkeys for efficient work. These keys provide quick access to multimedia controls and system functions.

3. Multi-Device Switching

Once paired with multiple devices (up to 3-4), you can switch between them by pressing the corresponding Fn + Q/W/E key for the desired device.

4. Sleep Mode

If there is no operation for 5 minutes, the keyboard backlight will automatically turn off. After 30 minutes of no operation, the keyboard will enter a sleep state to conserve battery. Press any key to wake it up, and it will automatically reconnect to the last paired device.

Maintenance

To ensure the longevity and optimal performance of your ColorReco Thin84 keyboard, follow these maintenance guidelines:

  • Cleaning: Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface of the keyboard. Avoid harsh chemicals or abrasive materials. For cleaning between keycaps, use compressed air or a small brush.
  • Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Spills: Keep liquids away from the keyboard to prevent damage to internal components. In case of a spill, immediately disconnect the keyboard and allow it to dry completely before reconnecting.
  • Handle with Care: The keyboard features an aluminum alloy body; avoid dropping or subjecting it to strong impacts.

Troubleshooting

Keyboard Not Connecting via Bluetooth

  • Ensure the keyboard is switched to "bluetooth" mode.
  • Verify that Bluetooth is enabled on your host device.
  • Re-enter pairing mode on the keyboard by long-pressing Fn + Q/W/E for 3 seconds until the LED flashes white.
  • Remove the keyboard from your device's Bluetooth list and attempt to pair again.
  • Ensure the keyboard battery is charged.

Keys Not Responding

  • Check if the keyboard is in sleep mode; press any key to wake it up.
  • If using wired mode, ensure the USB-C cable is securely connected to both the keyboard and the computer.
  • Try connecting the keyboard to a different USB port or device to rule out port or device-specific issues.

Backlight Not Working

  • Ensure the keyboard battery is sufficiently charged.
  • Check if the backlight has been turned off or dimmed using the keyboard's function keys.

Specifications

FeatureDetail
Brand NameYANFU (ColorReco)
ModelThin84
Keyboard Standard83 keys
Operation StyleMechanical
Shaft BodyLow shaft
Connection ModeBluetooth Wireless / USB-C Wired
Interface TypeBluetooth, Bluetooth / USB
Charging InterfaceUSB-C
Product MaterialAluminium alloy
Product Dimensions (L*W*H)307.6mm * 118.1mm * 15.1mm
Product Weight560g
Battery IncludedYes
Compatible DevicesMac, Windows, Linux, macOS, Android
LanguageEnglish
Full Size KeyboardNo
Switches Hot SwapNo
Wrist SupportNo
Diagram showing the basic parameters and dimensions of the ColorReco Thin84 keyboard
Basic parameters and dimensions of the Thin84 keyboard.

User Tips

  • For optimal performance, ensure your device's Bluetooth drivers are up to date.
  • Experiment with the different RGB lighting effects to find your preferred aesthetic.
  • Utilize the multi-device switching feature to seamlessly transition between your computer, tablet, and smartphone.
  • If experiencing input lag in wireless mode, try moving closer to your device or ensuring no other wireless devices are causing interference.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or refer to the product's official support channels. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.