1. Warning & Safety Information
Please read the following safety manual and use steps before using this product:
- ▲ Do not expose equipment to rain, fire, and liquids.
- ▲ Don't put anything in the device.
- ▲ Do not repair the equipment or open the casing without professional help.
- ▲ Ensure good ventilation openings to avoid overheating damage to the product.
- ▲ Verify device compatibility before use.
- ▲ Power off before installation to ensure environment safety.
2. Product Introduction
The Qkens GT200 is a 200m Wireless HDMI Transmitter and Receiver system designed for high-speed, high-performance wireless communication between computers and monitors. It utilizes 5G modules, offering high bandwidth capacity and strong error correction capabilities to deliver high-definition video transmission and wireless screen projection.
This system supports wireless casting from various sources like cameras or computer screens to display devices, making it ideal for meetings, classes, reports, and home entertainment.


3. Product Features
- Wireless Transmission: Transmits HDMI signals wirelessly up to 200 meters in an open, barrier-free area (1 TX to 1 RX mode).
- HDMI Loop Bypass: The transmitter includes an HDMI Loop bypass output, allowing for local monitoring of the video source.
- High Definition: Supports 1080P @ 60Hz Full HD resolution for a clear visual experience.
- 5.8GHz Wireless Technology: Utilizes international 5.8GHz wireless transmission for fast speeds and strong anti-interference capabilities.
- Infrared Remote Control Extension: Supports IR remote control extension, enabling convenient control of the source device from the receiver side (only works in 1 TX to 1 RX mode).
- Wide Compatibility:
- Transmitter (TX) compatible with: PS3, PS4, PS5, Xbox, DVD players, Laptops, PCs, HD Cameras, TV Boxes, etc.
- Receiver (RX) compatible with: HDMI-enabled TVs, Projectors, Displays, etc.
- Plug and Play: No additional applications or complex setup required.
- Low Latency: Designed for 5G high smoothness and low latency, ensuring smooth video playback and gaming without stuttering.


4. Setup Instructions
Follow these steps to set up your Qkens GT200 Wireless HDMI Extender:
4.1. One-to-One Transmission (1 TX to 1 RX)
- Connect Transmitter (TX): Connect your video source device (e.g., PC, DVD, game console) to the HDMI IN port of the Transmitter using an HDMI cable. Connect the power supply to the DC12V port of the Transmitter.
- (Optional) HDMI Loop-out: If you wish to monitor the video source locally, connect an HDMI cable from the HDMI OUT port of the Transmitter to a local display.
- Connect Receiver (RX): Connect the HDMI OUT port of the Receiver to your display device (e.g., TV, projector) using an HDMI cable. Connect the power supply to the DC12V port of the Receiver.
- Power On: Ensure both the Transmitter and Receiver are powered on. The devices will automatically pair.
- IR Remote Control Setup (for 1 TX to 1 RX only):
- Connect the IR IN cable to the IR IN port on the Receiver and place the IR receiver head in a location where it can receive signals from your remote control.
- Connect the IR OUT cable to the IR OUT port on the Transmitter and place the IR emitter head near the IR sensor of your source device.


4.2. One-to-Many Transmission (1 TX to up to 4 RXs)
The system supports connecting one Transmitter to multiple Receivers (up to 4). Note that IR remote control extension is not supported in this mode.
- Connect Transmitter (TX): Follow step 1 from the One-to-One Transmission setup.
- Connect Multiple Receivers (RXs): Connect each additional Receiver to its respective display device using an HDMI cable and connect its power supply.
- Power On: Ensure all Transmitters and Receivers are powered on. The devices will automatically connect.

5. Operating Instructions
Once the setup is complete and all devices are powered on, the Qkens GT200 system operates automatically:
- Automatic Connection: The Transmitter and Receiver(s) will automatically establish a wireless connection.
- Video Display: The video signal from your source device will be wirelessly transmitted and displayed on the connected monitor(s).
- IR Control (1 TX to 1 RX only): If IR extension is set up, you can use your source device's remote control from the receiver's location to control the source device.





Product showcase video demonstrating the Qkens GT200 Wireless HDMI Extender.
6. Maintenance
To ensure the longevity and optimal performance of your Qkens GT200 Wireless HDMI Extender, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the devices. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure the devices are placed in a well-ventilated area to prevent overheating. Do not block the ventilation openings.
- Storage: When not in use for extended periods, store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Management: Keep all cables neatly organized and avoid sharp bends or kinks that could damage them.
- Power Supply: Only use the provided power adapters. Using incompatible power supplies can damage the device.
7. Troubleshooting
If you encounter issues with your Qkens GT200, refer to the following common troubleshooting steps:
- No Signal/Black Screen:
- Ensure both the Transmitter and Receiver are powered on and their power indicator lights are active.
- Check all HDMI cable connections. Ensure they are securely plugged into the correct ports.
- Verify that the input source on your display (TV/monitor) is set to the correct HDMI input.
- Ensure the distance between the Transmitter and Receiver is within the specified range and there are no significant obstructions.
- Try restarting both the Transmitter and Receiver by unplugging and re-plugging their power adapters.
- Poor Video Quality/Stuttering:
- Reduce the distance between the Transmitter and Receiver.
- Minimize obstructions (walls, furniture) between the units.
- Ensure there are no strong 5.8GHz wireless interference sources nearby.
- If using multiple receivers, note that transmission distance decreases with more receivers.
- IR Remote Control Not Working:
- Ensure the IR IN and IR OUT cables are correctly connected to the Receiver and Transmitter, respectively.
- Verify that the IR receiver head is positioned to receive signals from your remote and the IR emitter head is directly facing the IR sensor of your source device.
- Remember that IR remote control extension only works in 1 TX to 1 RX mode.
- Overheating:
- Ensure the devices have adequate ventilation. Do not cover them or place them in enclosed spaces.
- If overheating persists, power off the device and allow it to cool down before resuming use.
8. Specifications
| Feature | Description |
|---|---|
| Product Name | 200m Wireless HDMI Transmitter and Receiver |
| Brand | Qkens |
| Model | GT200 |
| Connector Type | Wireless |
| Origin | Mainland China |
| Certification | CE |
| Max Resolution | 1080P @ 60Hz Full HD |
| Wireless Frequency | 5.8GHz |
| Transmission Distance (1 TX to 1 RX) | Up to 200m (barrier-free) |
| Transmission Distance (1 TX to 2 RX) | Up to 60m |
| Transmission Distance (1 TX to 3 RX) | Up to 30m |
| Transmission Distance (1 TX to 4 RX) | Up to 20m |
| HDMI Cable Max Input/Output Distance | < 5 meters (1920x1080P@60HZ) |
| IR Remote Control Extension | Supported (1 TX to 1 RX mode only) |
| Power Supply | DC12V |
| Package Weight | 1.0 kg |
| Package Dimensions (L x W x H) | 11 cm x 11 cm x 11 cm |

9. Package Content
The standard package for 1 TX and 1 RX includes:
- 1 x 200M HDMI Transmitter
- 1 x 200M HDMI Receiver
- 2 x DC12V Power Adapters
- 2 x IR Cables (1 IR IN, 1 IR OUT)
- 1 x User Manual
If you purchased additional receivers, each additional receiver package typically includes:
- 1 x HDMI Receiver
- 1 x DC12V Power Adapter
- 1 x IR Cable (IR IN)

10. User Tips
- For optimal performance, especially for gaming or high-refresh-rate content, ensure the Transmitter and Receiver are in direct line of sight with minimal obstructions.
- When using the IR remote control extension, carefully position the IR emitter head directly over the IR sensor of your source device for reliable control.
- While the system supports multiple receivers, be aware that increasing the number of receivers will reduce the effective transmission distance. Plan your setup accordingly.
- If experiencing signal drops, try relocating the units slightly to find a clearer wireless path.
11. Warranty & Support
The Qkens GT200 Wireless HDMI Extender is a 100% genuine original product. For any support or warranty inquiries, please contact the official brand agent: YiBao Trading Ltd Store / YiBaohk Trading LTD Store / Qkens Store.
Please retain your proof of purchase for warranty claims.