1. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Warning: To prevent electric shock, do not open the enclosure. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Warning: Ensure all connected computers and peripherals are powered off before connecting or disconnecting cables to prevent potential damage.
- Caution: Do not expose the device to extreme temperatures, direct sunlight, or high humidity. Keep away from water sources to avoid short circuits.
2. Package Contents
Please check the package for the following items:
- 1 x KVM Switch (4 PC, 2 Monitors)
- 1 x DC 12V Power Supply
- 4 x USB Cables
- 1 x Wired Remote (1.5m)
- 1 x User Manual

Figure 2.1: Package Contents and Device Dimensions (212mm x 77.5mm x 30mm)
3. Product Overview
The KVM switch features multiple ports and buttons for seamless operation.
Front Panel
- ON/OFF Switch: Power on or off the device.
- USB 3.0 Ports (x3): For connecting USB peripherals such as mouse, keyboard, U-disk, or printer.
- PC 1-4 Selection Buttons: Manually switch between connected computers.
- Wired Remote Port: Connect the included wired remote for convenient switching.
Rear Panel
- DC/12V Power Input: Connect the provided power adapter.
- PC Inputs (x4): Each PC input section includes:
- Input B (HDMI & DP): Connect to the HDMI and DisplayPort outputs of your computer.
- USB3.0 IN: Connect to a USB 3.0 port on your computer.
- Input A (HDMI & DP): Connect to the HDMI and DisplayPort outputs of your computer.
- Monitor Outputs:
- OUT A (DP): Connect to your DisplayPort monitor.
- OUT B (HDMI): Connect to your HDMI monitor.

Figure 3.1: Front and Rear Panel Layout with USB 3.0 Speed Indication
4. Setup Instructions
Follow these steps to connect your computers and monitors to the KVM switch:
- Power Down: Ensure all connected computers and peripherals are powered off.
- Connect Peripherals: Connect your keyboard, mouse, and any other USB peripherals (U-disk, printer) to the USB 3.0 ports on the front panel of the KVM Switch.
- Connect Monitors: Connect your DisplayPort monitor to the OUT A (DP) port and your HDMI monitor to the OUT B (HDMI) port on the rear panel of the KVM Switch.
- Connect Computers: For each computer (PC1 to PC4):
- Connect one HDMI cable from your computer's HDMI output to the corresponding Input A/B (HDMI) port on the KVM switch.
- Connect one DisplayPort cable from your computer's DisplayPort output to the corresponding Input A/B (DP) port on the KVM switch.
- Connect one USB cable from your computer's USB 3.0 port to the corresponding USB3.0 IN port on the KVM switch.
- Connect Power: Plug the DC 12V power adapter into the DC/12V input on the rear panel of the KVM switch, then plug it into a power outlet.
- Power On: Power on the KVM switch using the ON/OFF switch. Then, power on your computers, followed by your monitors.

Figure 4.1: Detailed Wiring Diagram for 4 PCs, 2 Monitors, and Peripherals
5. Operating Instructions
Power On/Off
Press and hold the power button on the front panel for 3 seconds to turn the device on or off.
Switching Between Computers
You can switch between connected computers using the following methods:
- Front Panel Buttons: Press the corresponding PC1, PC2, PC3, or PC4 button on the front panel to switch to that computer.
- Wired Remote: Use the included 1.5m wired remote control to switch between computers conveniently.
Display Modes (Windows OS)
The KVM switch supports both Mirror (Duplicate) and Extended display modes for your monitors. To configure these modes in Windows:
- Press the Windows key + P on your keyboard.
- A sidebar will appear with display options:
- Duplicate (Mirror Mode): Select this option to display the same content on both monitors.
- Extend (Extended Mode): Select this option to extend your desktop across both monitors, allowing you to have different content or drag windows between them.
Video 5.1: How to set output mode (Duplicate/Extend) in Windows OS

Figure 5.1: Visual comparison of Mirror Mode and Extended Mode
6. Maintenance
- Turn off the device when not in use and store it in a dry place.
- Keep the device away from children.
- To clean the device, use a soft, dry cloth. Do not use liquid or aerosol cleaners.
7. Troubleshooting
- No Display or Flickering: Ensure all HDMI and DisplayPort cables are securely connected and are of high quality, especially when using high resolutions (8K/4K). Using certified cables is crucial for stable video output.
- USB Peripherals Not Responding: Check that the USB 3.0 IN cables from each computer are properly connected to the KVM switch. Ensure the KVM switch is powered on.
- Display Issues After Switching: This KVM switch does not support EDID emulation. This means that when you switch between computers, the active computer may detect a change in display configuration, potentially causing windows to rearrange or a brief signal loss. This is normal behavior for KVMs without EDID emulation.
- Power Issues: Ensure the DC 12V power adapter is correctly connected to the KVM switch and a working power outlet.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | KC-KVM402DH |
| Material | Metal |
| USB Version | USB 3.0 |
| USB Transfer Rate | 5Gbps (10x faster than USB 2.0) |
| Video Connectors | HDMI-Compatible, DisplayPort (DP) |
| Max Resolution (HDMI) | 8K@60Hz, 4K@120Hz, 4K@60Hz |
| Max Resolution (DisplayPort) | 4K@144Hz, 4K@120Hz, 4K@60Hz |
| Shielding | Combination |
| Application | Computer, Monitor, Projector, Television |
| Certification | CE |
| Dimensions (L x W x H) | 212mm x 77.5mm x 30mm |
9. User Tips
- Cable Quality is Key: For optimal performance, especially with high resolutions like 4K@144Hz or 8K@60Hz, always use high-quality, certified HDMI and DisplayPort cables. This is crucial for stable video output.
- Wireless Peripherals: Many users report excellent performance with wireless mice, keyboards, and microphones connected via the KVM's USB 3.0 ports.
- USB Device Sharing: The USB 3.0 ports are versatile and can be used to share various USB devices, including external SSDs, printers, and scanners, across all connected computers.
- Switching Convenience: Both the front panel buttons and the wired remote offer reliable and quick switching between computers. Choose the method that best suits your desk setup.
- EDID Behavior: Be aware that this KVM switch does not support EDID emulation. This means your computers may detect a display change when switching, which can sometimes cause window rearrangement. This is expected behavior.
10. Compliance Information
Applicable Directives
This product complies with the following EU Directives:
- Electromagnetic Compatibility (EMC): EN 55032 / EN 55035
- Low Voltage Directive (LVD) / RoHS: EN 62368-1 / Directive 2011/65/EU
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
11. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or visit the official KCEVE website. Please retain your proof of purchase for warranty claims.