Bluavido 11.26" IPS 4K Mirror Dash Cam User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Bluavido 11.26" IPS 4K Mirror Dash Cam. This advanced dual-camera system is designed to enhance your driving safety and provide reliable recording capabilities with features like 4K resolution, a Sony IMX589 sensor, built-in WiFi, GPS, night vision, loop recording, and parking monitoring.

Your Driving Safety, Redefined— Premium 12” 4K Mirror Dash Cam. Tired of grainy dash cam footage? Want real protection on the road and while parked? Meet the ultimate driving companion — a full-screen mirror dash cam built for those who value clarity, safety, and confidence behind the wheel.

2. Safety Information

Please read all safety instructions carefully before using the device. Improper use may result in damage to the product or vehicle. Ensure the device is securely mounted and does not obstruct your view while driving. Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.

3. Package Contents

Verify that all items are present in the box:

• 1 × 4K Mirror Dash Cam (Host)
• 1 × Waterproof Rear Camera
• 1 × Car Charger (Power Cable)
• 1 × GPS Antenna (GPS Module)
• Mounting Straps (Rubber Band)
• Sticker
• 1 × User Manual

4. Specifications

5. Installation Guide

Follow these steps to properly install your mirror dash cam:

1. Prepare for Installation: Ensure the car engine is completely turned off before proceeding.
2. Insert MicroSD Card: Insert a high-speed microSD card (Class 10 or above) into the recorder slot. Use a microSD card with a minimum capacity of 8GB and a maximum capacity of 128GB.
3. Mount the Recorder: Mount the recorder on the rearview mirror using the provided straps.
4. Connect Power: Plug the car charger into the car's lighter socket.
5. Route Charging Cable: Use the charging extension cable to connect the recorder to the car charger. When routing the cable, it can be neatly laid along the edge of the windshield.
6. Attach Rear Camera: Attach the rear camera to the back of the vehicle, ensuring it is installed in the correct direction. Route the wiring along the vehicle's roof, if needed. After installation, connect the rear camera plug to the recorder. The cable length for the rear camera is part of the overall 6-meter cable.
7. Position Lens: Ensure the lens is positioned level with the ground. The front camera is installed on the left side for an aesthetically pleasing look and is adjustable (up, down, left, right). It is also compatible with right-hand drive vehicles.
8. Test Installation: Start the engine. The recorder will start automatically and enter recording mode. The video indicator will flash. Check the display screen to ensure it is functioning properly. If the screen appears inverted, contact customer support.

Note:

• Format the microSD card using the machine's menu for the first time after insertion.
• A detailed user manual in PDF format is available for download: User Manual (PDF).

6. Operating Instructions

6.1. Main Interface Overview

The 11.26-inch IPS touchscreen provides a clear view of the road and easy access to settings. The main interface displays real-time video, recording status, time, and other indicators.

6.2. Basic Functions

• Power On/Off:
  • To turn on: Press and hold the power button for 3 seconds while the device is off.
  • To turn off: While the device is on, press and hold the power button for 3 seconds. The recorder will automatically save video files and shut down.
• Display Backlight:
  • To turn off the backlight: Press the power button briefly to enter sleep mode.
  • To turn on the backlight: Press the power button briefly again.
• Reset: If the device crashes, use the reset button located on the back. Press it briefly and reconnect the power to restore normal function.

6.3. Recording Functions

• Video Lock: Tap the lock icon to lock/unlock the video. A locked icon means the video is locked and will not be overwritten.
• Sound Status: Tap the sound icon to toggle sound recording. A red slash means sound is off.
• Recording Status: Tap the red dot icon (◉) to start or stop recording. A small red dot means the recording is active; no red dot means the recording is stopped.
• Take Photo: Tap the camera icon to take a photo.
• Playback: Tap the playback icon to view recorded videos.
• Loop Recording: Select the recording duration from "Off, 1 min, 3 min, 5 min" to continuously capture the latest video and audio. When the memory card is full, the oldest videos are overwritten automatically.
• Emergency Recording (G-Sensor): Video recorded in emergency recording mode (saved as a file that is less likely to be overwritten). Sudden impacts trigger the G-sensor to lock the footage, keeping it safe from being erased.
• Impact Recording: Automatically records footage before and after an impact occurs.

6.4. Display & General Settings

• Brightness Adjustment: Tap the brightness icon to adjust screen brightness.
• Touch Panel Operation: The 11.26" IPS touchscreen allows easy interaction. Swipe up and down to adjust the lens angle of view, swipe left or right to adjust screen brightness, and swipe left or right to switch between front/rear camera screens.
• Video Size: Set the video resolution to 1080p, 2K, or 4K. Default is 4K.
• Loop Video Length: Set segment length to 1, 2, or 5 minutes. Default is 2 minutes.
• Parking Mode: By default, parking mode is off. Enable it in the menu. The G-sensor detects movement and records for 20 seconds before shutting down. Recorded files are locked and not overwritten.
• Park Video Time Lapse: Records at 1 or 4 frames per second. Requires a special 3-core step-down cable connected to the fuse box. Saves a video file every 30 minutes.
• Timelapse Recording Duration: Set duration to 2, 8, 12, or 24 hours. Requires a special 3-core step-down cable.
• Gravity Sensing: Three sensitivity modes (low, medium, high). Locks current footage upon impact.
• Video Sound: On or off (default is on).
• Back Mirror: Off by default. When on, rearview is displayed. Rear preview should display a mirror image when reversing.
• Preview Mode: Includes pre-recording, post-recording, and split-screen options. Default is post-recording.
• Light Source Frequency: Select between 50 Hz and 60 Hz. Default is 50 Hz.
• Exposure: Adjustable to one of seven levels: 3, 2, 1, 0, -1, -2, -3.
• Formatting: Formats the microSD card. Warning: This deletes all files permanently. Regular formatting (every 1-2 weeks) is recommended for optimal performance.
• Language Setting: Select desired language.
• WiFi Switch: Turn WiFi on or off. Default is off.
• WiFi Information: View QR code for app download, WiFi name, and password.
• System Volume: Adjust to low, medium, or high.
• Automatic Screen Off: Set screen to turn off after 10s, 30s, or 1 min. Default is off.
• Device Time: Set date and time.
• Time Format: Choose 24-hour or 12-hour. Default is 24-hour.
• Equipment Information: View system version and related info.
• Restore Factory Settings: Reset device to factory settings.

7. Advanced Features

7.1. Crystal-Clear 4K UHD Recording

Capture every detail of your drive in stunning 4K (front) and 1080P (rear) resolution. The upgraded Sony IMX589 sensor ensures true clarity day and night — no more fuzzy license plates or washed-out footage.

7.2. Superior Night Vision with Sony IMX589 + HDR/WDR

Equipped with the high-end Sony IMX589 sensor and HDR/WDR technology, this dash cam balances exposure perfectly. Drive with confidence even in low-light or backlit environments, clearly capturing license plates.

7.3. Built-in GPS for Route Tracking

Automatically record your driving route, speed, and time with the embedded GPS module. This feature is perfect for evidence, fleet tracking, or personal driving logs.

7.4. Built-in WiFi and Viidure Mobile App

Forget about removing SD cards! Just connect your phone via WiFi and use the Viidure app to:

• View real-time video.
• Download footage to your phone.
• Change settings remotely.
• A smarter, easier way to manage your dash cam.

Mobile App Download:

1. WiFi Setup and App Installation: On the device, navigate to Settings > General Settings to find the WiFi information. Install the app by scanning the provided QR code.
2. View WiFi Information: Select WiFi Information to display the WiFi name and password. The WiFi Name is a randomly generated name, which can be changed through the mobile app after connection. The WiFi Password is 12345678, which can also be changed via the mobile app.

7.5. 24-Hour Parking Monitor & Motion Detection

Keep your vehicle protected even while parked. The camera wakes up when it detects motion or impact, capturing evidence of any suspicious activity. This feature provides 24-hour parking surveillance.

Video 7.1: Example driving footage captured by the dash cam, demonstrating recording quality and field of view.

8. Troubleshooting

• Device not saving videos: Ensure the device is in normal recording mode. The following may cause video loss or damage: removing the microSD card during recording, power failure during recording, physical damage to the device (e.g., severe collision), or memory card dislodging due to impact.
• Device unresponsive/crashed: If the dash cam malfunctions, press the reset button located on the back to restart it. Reconnect power after pressing the reset button.
• Screen inverted: If the screen appears inverted after installation, contact customer support for assistance.
• MicroSD card issues: Regularly format the microSD card (recommended once every 1-2 weeks) to prevent recording issues due to insufficient capacity. Remember that formatting deletes all files permanently, so back up important data first.
• Screen brightness: Screen brightness can be adjusted via the settings menu by tapping the brightness icon.

9. User Tips

• Optimal Card Maintenance: To ensure continuous and reliable recording, format your microSD card every 1-2 weeks. This prevents issues caused by accumulated locked files or fragmented data. Always back up important footage before formatting.
• Adjusting Brightness: If you find the screen too dim or too bright, you can easily adjust the screen brightness through the device's settings menu by tapping the brightness icon.
• Cable Management: The rear camera cable is 6 meters long, providing ample length for routing. Take your time to neatly tuck the cable along the vehicle's roof lining and trim for a clean and secure installation.
• Parking Mode Setup: For 24-hour parking surveillance and time-lapse recording, remember that a special 3-core step-down cable connected to your car's fuse box is required. This ensures continuous power and proper functionality when the vehicle is off.

10. Warranty and Support

For warranty information, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.