1. Product Introduction
1.1 Product Name
Pure Plastic Desktop Decoration Ornament (Lirili Larila Collectible Toy)
1.2 Product Purpose
This product is a decorative desktop ornament designed for placement on stable indoor desktops. It is used to beautify living and working spaces, enhance decorative ambiance, and match different interior styles.
Important Note:
It shall not be used as a load-bearing tool, children's toy, or for any other non-decorative purposes.
1.3 Product Material
Food-grade safe plastic, free of toxic and harmful substance emissions, in line with the basic safety requirements of EU GPSR for daily decorative products.
2. Setup Instructions
2.1 Correct Placement
Position the product on a stable, dry, and non-inclined desktop or flat surface. Ensure the bearing surface can fully support the product's weight to prevent slipping and falling.
3. Usage and Restrictions
3.1 Cleaning
To remove surface dust, gently wipe with a clean, dry, soft cloth. For stubborn stains, use a slightly dampened soft cloth (without dripping water) and wipe immediately with a dry cloth.
3.2 Strict Usage Restrictions
- Load-bearing Prohibition: This product is for decoration only. Do not place any heavy objects (load-bearing limit ≤ 0.1kg); excessive weight will cause product deformation or breakage.
- Environmental Restrictions:
- Avoid prolonged exposure to direct sunlight (more than 8 hours a day) to prevent plastic discoloration and embrittlement.
- Do not place in high-temperature environments (temperature > 40°C, such as near heaters, stoves) or humid areas (humidity > 70%, such as bathrooms, kitchen sinks).
- For indoor use only; do not use outdoors to avoid damage from rain, wind, and ultraviolet rays.
- Operation Restrictions: Do not disassemble, cut, or modify the product structure; do not use chemical solvents (alcohol, bleach, disinfectant, etc.) for cleaning, which will damage the surface finish.
4. Maintenance
4.1 Storage
When not in use for a long time, place the product in a sealed bag and store it in a cool, dry place to avoid dust accumulation and material aging.
4.2 Cleaning
Refer to section 3.1 for detailed cleaning instructions.
5. Safety Warnings
WARNING:
- If the product contains detachable small parts (size < 3cm), it is not suitable for children under 3 years old to use without adult supervision. Prevent children from accidental ingestion to avoid choking risk.
- The product is made of plastic. Dropping or strong impact may cause breakage, resulting in sharp edges. Do not touch the broken parts to avoid scratching; please discard the damaged product immediately.
- Do not put the product or its parts into the mouth; do not contact food, beverages, or tableware to avoid potential health risks.
- Do not incinerate the product or its waste. It will release toxic gases when burned, which is harmful to the environment and human health. Please dispose of it according to local plastic waste classification regulations.
6. Specifications
| Attribute | Detail |
|---|---|
| Material | Plastic |
| High-concerned chemical | None |
| Origin | Mainland China |
| Dimensions (Height) | 7.2 cm / 2.8 in |
| Dimensions (Width) | 5 cm / 1.9 in |
| Product Weight | 0.037 kg |
| Package Dimensions (L x W x H) | 10 cm x 9 cm x 6 cm |
| Maximum Load-bearing Limit | ≤ 0.1 kg |
| Maximum Operating Temperature | 40°C |
| Maximum Operating Humidity | 70% |
7. Troubleshooting
This decorative item is designed for simplicity and durability. Most issues can be resolved by reviewing the usage and restriction guidelines.
- Product instability: Ensure the placement surface is stable, dry, and non-inclined. The bearing surface must fully support the product's weight.
- Discoloration or embrittlement: This is often caused by prolonged exposure to direct sunlight or high temperatures. Relocate the product to a cooler, shaded indoor area.
- Surface damage: Avoid using chemical solvents for cleaning. Use only a soft, dry, or slightly damp cloth. Do not attempt to disassemble or modify the product.
- Breakage: If the product breaks due to dropping or strong impact, discard it immediately to avoid injury from sharp edges.
8. User Tips
- For best visual appeal, place the Lirili Larila collectible on a contrasting background to make its unique design stand out.
- Consider grouping it with other small decorative items to create a themed display, enhancing its 'weirdcore' aesthetic.
- Regular light dusting with a soft brush or cloth will keep your collectible looking its best.
9. Support Information
9.1 Manufacturer Details
- Manufacturer Name: Shenzhen niuwuwu electronic commerce co., ltd
- Manufacturer Address: Room 101, No.3, Lane 2 Riverside Garden, Shiyan Street, Baoan District, Shenzhen, Guangdong, CN (China)
9.2 EU Responsible Person
- Name: Y & H S.R.L.
- Address: Via Gravina 21, Matera, Puglia, IT (Italy)
9.3 Customer Service
- Email: 1018737211@qq.com
9.4 Additional Documentation
A detailed user manual in PDF format is available. Please refer to the official product page or contact customer support for the direct link to the document: User Manual (PDF)