1. Introduction
The FGHGF B13C is a high-quality 48V/60V/72V 50A 1500W Sine Wave Split Intelligent Motor Speed Controller designed for electric bicycles. This controller offers a powerful start, excellent climbing capability, and reduced motor noise, providing a smooth and efficient riding experience. It serves as a perfect replacement for old or damaged controllers, ensuring reliable performance for your e-bike.
2. Safety Information
- Always disconnect the battery before performing any installation, maintenance, or troubleshooting.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Avoid exposing the controller to water or extreme temperatures.
- If you are unsure about any installation steps, seek assistance from a qualified technician.
- Wear appropriate safety gear, including eye protection, during installation.
3. Package Contents
Your package should contain the following item:
- 1 x FGHGF B13C Electric Bike Controller
4. Specifications
| Feature | Specification |
|---|---|
| Voltage | 48V / 60V / 72V (Universal) |
| Undervoltage Protection | 42V / 52V / 62V |
| Power | 1500W |
| Current | 50A |
| Dimensions (L x W x H) | Approx. 17.8 x 9 x 4.9 cm |
| Material | Plastic + Metal |
| Brand Name | FGHGF |
| Model Number | B13C Controller |
| Origin | Mainland China |
| Certification | CE |
5. Setup and Installation
Installing the B13C controller requires careful attention to wiring. It is recommended to have basic electrical knowledge or seek professional assistance if you are unfamiliar with e-bike wiring.
General Wiring Guide:
- Preparation: Ensure your e-bike's battery is disconnected. Identify the location for mounting the new controller.
- Identify Connectors: The B13C controller features multiple wire harnesses with various connectors. These typically include connections for the motor (phase wires and Hall sensor wires), battery, throttle, brake levers, display, pedal assist sensor (PAS), and possibly other accessories.
- Match Connections: Carefully match the connectors from your e-bike's components to the corresponding connectors on the controller. Most e-bike components use standardized connectors, making the process straightforward. Pay close attention to color coding and connector shapes.
- Motor Connections: Connect the three thick phase wires (usually green, blue, yellow) from the controller to the motor. Then connect the smaller Hall sensor wires (typically a 5-wire connector) to the motor's Hall sensor port.
- Battery Connection: Connect the main power wires (red for positive, black for negative) from the controller to your e-bike battery. Double-check polarity before connecting.
- Throttle/Brake/PAS: Connect the throttle, brake levers (often with cut-off switches), and pedal assist sensor to their respective ports on the controller.
- Display/Other Accessories: Connect any display units or other accessories as per their specific wiring instructions.
- Secure Wiring: Once all connections are made, ensure they are tight and secure. Use zip ties or cable wraps to organize and protect the wires from damage or snagging.
- Mount Controller: Securely mount the controller to your e-bike frame, ensuring it is protected from physical impact and moisture.
- Initial Test: Reconnect the battery. Power on your e-bike and perform a low-speed test to ensure all functions (throttle, brakes, PAS) are working correctly before riding.
Important: Refer to your e-bike's motor and component manuals for specific wiring diagrams and instructions, as configurations can vary.

Figure 1: Front view of the B13C controller with its comprehensive wiring harness.

Figure 2: Close-up view of various connectors on the controller's wiring harness.
6. Operating Instructions
Once the controller is correctly installed and connected, operating your e-bike is straightforward:
- Power On: Turn on your e-bike's battery and then the main power switch (if applicable). The display (if installed) should light up.
- Throttle Control: Gently twist the throttle to engage the motor. The speed will increase as you twist further.
- Pedal Assist System (PAS): If your e-bike has a PAS, simply start pedaling. The motor will provide assistance based on your pedaling input and the selected assist level (if adjustable via a display).
- Braking: Apply the brakes as usual. Many e-bikes have brake levers with motor cut-off switches, which will disengage the motor when applied.
- Power Off: Turn off the main power switch on your e-bike, then turn off the battery.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your controller:
- Keep Dry: Protect the controller from moisture and direct water exposure. While designed for outdoor use, excessive water can cause damage.
- Clean Connections: Periodically inspect all wire connections for corrosion or looseness. Clean with a dry cloth if necessary.
- Inspect Wires: Check all wires for any signs of fraying, cuts, or damage. Repair or replace damaged wires immediately.
- Avoid Overheating: Ensure the controller has adequate ventilation. Avoid covering it with materials that could trap heat.
- Secure Mounting: Verify that the controller remains securely mounted to prevent vibrations or impacts from causing internal damage.
8. Troubleshooting
If you encounter issues with your B13C controller, consider the following common problems and solutions:
- No Power to Motor:
- Check battery charge level.
- Ensure battery and controller power connections are secure.
- Verify the e-bike's main power switch is on.
- Motor Not Responding to Throttle:
- Check throttle connection to the controller.
- Ensure brake levers are not engaged (some have motor cut-off).
- Inspect throttle wiring for damage.
- Erratic Motor Behavior:
- Check all motor phase wires and Hall sensor wires for secure connections.
- Ensure no wires are pinched or damaged.
- Verify correct voltage setting for your battery.
- Controller Overheating:
- Ensure the controller is not covered and has proper airflow.
- Avoid prolonged high-power usage, especially on steep inclines.
If problems persist after checking these points, it may indicate a faulty component (controller, motor, or battery) and professional diagnosis is recommended.
9. User Tips
- For optimal performance and longevity, ensure your battery voltage matches the controller's operating range (48V, 60V, or 72V).
- Regularly check the tightness of all electrical connections to prevent intermittent issues.
- Consider using waterproof sealant around exposed connections if riding in wet conditions is frequent.
10. Warranty and Support
For any questions, technical support, or warranty claims regarding your FGHGF B13C Electric Bike Controller, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.