ThinkRider XX PRO

Contents

ThinkRider XX PRO Intelligent Direct Drive Indoor Bicycle Trainer

Model: XX PRO

Brand: ThinkRider

1. Introduction

Welcome to the ThinkRider XX PRO Intelligent Direct Drive Indoor Bicycle Trainer manual. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new smart trainer. The XX PRO is designed to offer a realistic and immersive indoor cycling experience with its powerful brushless motor, high power accuracy, and smart connectivity features. It boasts a maximum power output of 2500W, simulates gradients up to 25%, and provides power accuracy within ±1%.

The XX PRO also features self-power generation, allowing for use without a constant power source, and supports ANT+ FE-C and BLE FTMS wireless communication protocols for broad compatibility with popular cycling applications.

2. Setup Instructions

2.1 Package Contents

Before assembly, please verify that all components are present in the package:

ThinkRider XX PRO Package Contents

Image: ThinkRider XX PRO Package Contents, showing the trainer unit and various accessories.

  • XX-PRO Trainer Unit
  • 8-9-10 Flywheel Washer
  • Power Adapter
  • Instruction Manual (Specification)
  • Base Screw
  • Bucket Shaft Non-Drive Side Converter
  • Bucket Shaft Drive Side Converter
  • Quick Release Lever
  • Quick Remove Drive Side Special Pull
  • Quickly Remove Non-Drive Side Converter

2.2 Assembly and Bicycle Mounting

Follow these steps to set up your trainer and mount your bicycle:

  1. Place the trainer on a stable, level surface. Ensure adequate space around the unit for safe operation.
  2. Extend the base legs of the trainer for maximum stability.
  3. Remove the rear wheel from your bicycle.
  4. Carefully align the bicycle's rear dropouts with the trainer's axle.
  5. Secure the bicycle to the trainer using the quick release lever or appropriate thru-axle adapters. Ensure the connection is firm and secure.
  6. Ensure the bicycle chain is correctly seated on the trainer's cassette.
  7. If you intend to use the trainer with external power, connect the power adapter to the trainer and a suitable power outlet. The trainer can also generate its own power for unplugged use.

Video: Demonstration of bicycle mounting and initial setup on the ThinkRider XX PRO trainer.

3. Operating Instructions

3.1 Powering On and Self-Power Generation

  • If connected to a power source, the trainer will power on automatically.
  • The XX PRO features improved self-power generation efficiency. You can use it without being connected to a power source. Except for starting after an extended pause, the experience is almost indistinguishable from when plugged in.

3.2 Smart Interaction and Connectivity

The XX PRO supports built-in ANT+ FE-C and BLE FTMS wireless communication protocols, enabling seamless connectivity with various cycling applications and devices.

ThinkRider XX PRO Smart Interaction Connectivity

Image: Smart Interaction features, highlighting WiFi, Bluetooth (BLE), and ANT+ connectivity.

  • Compatible Apps: Connect to popular cycling apps such as Zwift, Trainerroad, and Rouvy.
  • Bike Computers: Compatible with select bike computers from Garmin, Wahoo, iGPSPORT, and more.
  • Note: Wi-Fi connectivity is only available in the Pro version and requires an Over-The-Air (OTA) update.

3.3 Riding Experience

  • Realistic Feel: The trainer provides a realistic road-riding pedal feel, enhancing your indoor training sessions.
  • Quiet Operation: It operates quietly, minimizing disturbance to others in your household or neighbors.
  • Accurate Power Data: Experience accurate power data with ±1% power output accuracy, providing true riding power metrics.
ThinkRider XX PRO Accurate Power Data Graph

Image: Graph illustrating accurate power data output from the ThinkRider XX PRO.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ThinkRider XX PRO trainer.

  • Cleaning: After each use, wipe down the trainer with a soft, damp cloth to remove sweat and dust. Avoid using abrasive cleaners or solvents.
  • Check Connections: Periodically inspect all bolts, screws, and fasteners for tightness. Tighten any loose components.
  • Drivetrain Inspection: Regularly check your bicycle's chain and cassette for wear and proper alignment. A well-maintained drivetrain ensures smooth operation on the trainer.
  • Storage: When not in use, store the trainer in a dry, cool environment away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your ThinkRider XX PRO, refer to the following common problems and solutions:

  • No Power / Trainer Not Responding:
    • If using external power, ensure the power adapter is securely connected to both the trainer and a working power outlet.
    • If using self-power generation, ensure you are pedaling at a sufficient speed to activate the trainer.
  • Connectivity Issues (Bluetooth/ANT+):
    • Ensure Bluetooth and/or ANT+ is enabled on your connecting device (smartphone, tablet, computer, bike computer).
    • Check that no other devices are currently connected to the trainer, as it may only support a limited number of simultaneous connections.
    • Try restarting the trainer and your connecting device.
    • Verify that your cycling application or bike computer is compatible with ANT+ FE-C and BLE FTMS protocols and is updated to the latest version.
  • Unusual Noises During Operation:
    • Check for any loose components on the trainer or your bicycle.
    • Ensure your bicycle is properly mounted and secured to the trainer.
    • Inspect the chain and cassette for proper alignment, lubrication, and wear.
  • Inaccurate Power Readings:
    • Ensure the trainer is placed on a perfectly level surface.
    • Check for any obstructions or issues with your bicycle's drivetrain that might affect power transfer.
    • The XX PRO features no calibration required, simplifying setup and ensuring consistent accuracy.

6. Specifications

ThinkRider XX PRO Product Information Table

Image: Product Information table detailing specifications for the ThinkRider XX PRO.

AttributeValue
Product ModelThinkRider XX-Pro
ColorBlack/White
Transmission ModeMotor self-drive
Maximum Power2500W
Power Accuracy±1%
Maximum Slope25%
Output DataPower/tread frequency/speed/left/right balance
Wireless TransmissionWifi & Bluetooth & ANT+
Downhill SimulationPlug in support
Power CalibrationNo calibration required
Frame Compatibility (Highroad)24/650c/700c
Frame Compatibility (Mountain)24"/26"/650B/29"
Software CompatibilityZwift
Dimension (Expanded)480 * 500 * 520mm
Net Product Weight16kg
MaterialMetal
Drive ModeDirect drive
CertificationCE
OriginMainland China, Jiangsu, China

7. User Tips

  • For optimal performance, ensure your trainer's firmware is always up to date. Check the ThinkRider website or companion app for the latest updates.
  • Consider using a trainer mat to protect your floor from sweat and scratches, and to further reduce noise and vibration during intense workouts.
  • Regularly check your bike's chain and cassette for wear and proper lubrication to ensure smooth and efficient operation on the trainer.
  • Experiment with different cycling apps to find the one that best suits your training goals and preferences.

8. Warranty and Support

For technical support, warranty claims, or any questions regarding your ThinkRider XX PRO trainer, please contact customer service using the details below:

Customer Service Contact Information

Image: Contact information for customer service.

  • WhatsApp: +86 16633953613
  • Email: jinpin13@126.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.