SEQURE M10-12/M10-18/M10-25Q GPS

SEQURE M10 Series GPS Module User Manual

Models: M10-12, M10-18, M10-25Q GPS

Brand: SEQURE

1. Introduction

The SEQURE M10 series GPS modules (M10-12, M10-18, M10-25Q) are designed for fixed-wing racing drones and other RC applications requiring precise and fast positioning. These modules utilize a new generation M10 chip, offering low power consumption and rapid satellite acquisition. Each model features a high-quality ceramic antenna for effective satellite signal reception. The M10-25Q model further enhances functionality by integrating a QMC5883L compass, expanding its application range.

The series offers miniaturized and multi-specification designs, ensuring compatibility and ease of installation across various drone sizes. Connection flexibility is provided through both direct plug-in and soldering pad options.

2. Product Overview

The SEQURE M10 series includes three distinct models: M10-12, M10-18, and M10-25Q, each varying in size and features. All models are equipped with a new generation M10 chip and a high-quality ceramic antenna for strong performance and accurate positioning.

SEQURE M10 Series GPS Modules
The SEQURE M10-25Q, M10-18, and M10-12 GPS modules. These modules feature a new generation M10 chip, high-quality ceramic antenna, strong performance, accurate positioning, small size, low power consumption, and fast satellite search.

Model Features:

  • M10-12 GPS: Miniaturized design, compact and easy to install, suitable for Mini FPV Racing drones, Micro whoops, etc.
  • M10-18 GPS: Supports direct plug-in and pad connection, offering strong compatibility.
  • M10-25Q GPS: Integrated QMC5883L compass for wider application scenarios.
Comparison of M10-12, M10-18, M10-25Q GPS modules
Visual comparison of the M10-12, M10-18, and M10-25Q GPS modules, highlighting their relative sizes.

Physical Dimensions and Weight:

Dimensions of M10-12, M10-18, M10-25Q GPS modules
Dimensions for M10-12 (12*16*4.5mm), M10-18 (18*18*8mm), and M10-25Q (25*25*8mm) GPS modules.
Weights of M10-12, M10-18, M10-25Q GPS modules
Weights for M10-12 (2.3g), M10-18 (7.2g), and M10-25Q (12.2g) GPS modules.

3. Specifications

ParameterM10-12 GPSM10-18 GPSM10-25Q GPS
ChipM10M10M10
FrequencyGPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1
Power Supply5V5V5V
Size12*16*4.5mm18*18*8mm25*25*8mm
Weight2.3g7.2g12.2g
InterfaceSH0.8-4P connector, PCB padSH1.0-4P connector, PCB padSH1.0-6P connector, PCB pad
AntennaCeramic AntennaCeramic AntennaCeramic Antenna
Receiving channels72 search channels72 search channels72 search channels
Baudrate115200115200115200
Output protocolUBLOXUBLOXNMEA/UBLOX dual protocol, I2C(Mag)
Compass//QMC5883L
Output frequency1Hz-10Hz (default 10Hz)1Hz-10Hz (default 10Hz)1Hz-10Hz (default 10Hz)
Speed accuracy0.05m/s0.05m/s0.05m/s
Horizontal positioning accuracy2D ACC 1.5m (open-air)2D ACC 1.5m (open-air)2D ACC 1.5m (open-air)
Receive sensitivityTrace -162dBm, Capture -160dBmTrace -162dBm, Capture -160dBmTrace -162dBm, Capture -160dBm
Working temperature-40°C ~ +85°C-40°C ~ +85°C-40°C ~ +85°C
Storage temperature-40°C ~ +105°C-40°C ~ +105°C-40°C ~ +105°C

4. Setup and Installation

Connection Methods

The GPS modules support two primary connection methods:

  • Direct Plug-in: Utilizing the provided SH connectors for quick and easy installation.
  • Soldering Pad: For more permanent or custom installations, the modules feature soldering pads.

Wiring Diagram

NOTE: Make sure the wiring is correct before powering, otherwise the product may be damaged.

Wiring Diagram for SEQURE M10 GPS Modules
Detailed wiring diagram for both SH Plug-in Socket and Soldering connections for M10-25Q, M10-18, and M10-12 modules to a Flight Controller (FC). Ensure correct connections for 5V, GND, TX, RX, SDA, and SCL.

Firmware Compatibility

Consider the following recommendations for firmware compatibility:

  • M10-12 and M10-18 GPS (without compass): Recommended for use with BF (Betaflight) firmware.
  • M10-25Q GPS (with QMC5883L compass): Recommended for use with INAV firmware.
Firmware compatibility and antenna area comparison
Illustration showing antenna area comparison (M10-25Q > M10-18 > M10-12) and recommended firmware types for each module.

5. Operating Instructions

Satellite Acquisition

The M10 series GPS modules are designed for fast satellite search and positioning. The larger the antenna area, the faster the search speed for satellites. The M10-25Q has the largest antenna area, followed by M10-18, and then M10-12.

Output Protocol and Frequency

  • M10-12 and M10-18: Utilize the UBLOX output protocol.
  • M10-25Q: Supports NMEA/UBLOX dual protocol and I2C (Mag) for compass data.
  • All models have an adjustable output frequency from 1Hz to 10Hz, with a default setting of 10Hz.

6. Maintenance

To ensure the longevity and optimal performance of your SEQURE M10 GPS module, follow these general maintenance guidelines:

  • Keep Dry: Protect the module from moisture and humidity. Water damage can lead to malfunctions.
  • Avoid Extreme Temperatures: Operate and store the module within the specified temperature ranges (-40°C to +85°C for operation, -40°C to +105°C for storage).
  • Handle with Care: The modules are small and contain delicate electronic components. Avoid dropping or subjecting them to physical shock.
  • Cleanliness: Keep the module free from dust and debris. Use a soft, dry brush or compressed air if cleaning is necessary.

7. Troubleshooting

If you encounter issues with your GPS module, consider the following troubleshooting steps:

  • No GPS Lock or Slow Acquisition:
    • Ensure the drone has a clear, unobstructed view of the sky.
    • Verify all wiring connections (5V, GND, TX, RX) are secure and correctly matched to your flight controller.
    • Check for potential electromagnetic interference from other electronic components on your drone.
  • Incorrect Positioning or Drifting:
    • For the M10-25Q (with compass), ensure the compass is properly calibrated according to your flight controller's instructions.
    • Minimize magnetic interference by positioning the GPS module away from power wires, motors, and ESCs.
  • Module Not Detected by Flight Controller:
    • Double-check the TX and RX connections between the GPS module and the flight controller. They should be cross-connected (GPS TX to FC RX, GPS RX to FC TX).
    • Verify that the baud rate setting in your flight controller's firmware matches the GPS module's baud rate (115200).
    • Ensure the module is receiving the correct 5V power supply.
  • Module Damaged After Powering:
    • Immediately disconnect power.
    • Carefully review your wiring against the provided diagram to ensure no incorrect voltage or polarity connections were made.

8. User Tips

  • The M10-25Q model includes a QMC5883L compass, which is beneficial for applications requiring precise heading information. Ensure proper calibration for optimal performance.
  • For mini FPV racing drones and micro whoops, the miniaturized M10-12 is ideal due to its compact size and light weight.
  • Always double-check wiring connections before applying power to prevent damage to the module or flight controller.
  • Consider the antenna area: larger antennas (M10-25Q) generally provide faster satellite acquisition.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Related Documents - M10-12/M10-18/M10-25Q GPS

Preview FlyfishRC M10 Mini GPS Module: Setup and Configuration Guide
A comprehensive guide to setting up and configuring the FlyfishRC M10 Mini GPS module with Betaflight for enhanced drone stability and GPS rescue functionality.
Preview Troubleshooting GPS Module Magnetometer and Barometer Issues with GEP-M8Q and M10-DQ
A guide to resolving common issues with GEP-M8Q and M10-DQ GPS module magnetometers and barometers not working, covering wiring, firmware configuration, and I2C bus settings in Betaflight.
Preview GEP-M8Q GPS Module: GEPRC User Manual, Specs, Wiring & Setup Guide
Comprehensive guide for the GEPRC GEP-M8Q GPS module, covering its features, technical specifications, wiring, installation, and configuration for FPV drones and models. Learn how to set up and use this high-precision GPS module with integrated magnetometer and barometer for stable flight.
Preview RF Test Report for Botslab Battery Camera (BC-BD06-M10 Series) - FCC ID 2A22Z-W520
Detailed RF test report for the Botslab Battery Camera, covering DFS parameters, test results, and equipment specifications according to FCC Part 15.407 and ANSI C63.10-2013 standards. Includes model numbers BC-BD06-M10 series and FCC ID 2A22Z-W520.
Preview UBX-M8030 GNSS Receiver User Manual v3.2
User manual for the UBX-M8030 GNSS Receiver from QGP Supply, detailing its features, specifications, and setup for various platforms including Windows and Raspberry Pi.
Preview MAX-M10S Standard Precision GNSS Module Integration Manual
Discover the u-blox MAX-M10S, an ultra-low-power, standard precision GNSS module for high-performance asset tracking. Features multi-constellation support, Super-S technology, and exceptional battery life.