1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Estardyn 12864 SPI LCD Module. This 128x64 dot matrix graphic display screen is designed for various embedded applications, including Arduino projects, offering clear visual output with an SPI interface.
2. Product Variants
The Estardyn 12864 SPI LCD Module is available in different configurations, primarily distinguished by the presence of a protective iron frame and font library chip integration.


Please verify your specific module type to ensure compatibility with your project requirements.
3. Specifications
| Feature | Description |
|---|---|
| Brand Name | Estardyn |
| Model Number | 12864 SPI LCD Module (GM12864-01A) |
| Type | Standard |
| Resolution | 128*64 dots |
| Display Mode | 1 |
| Display Type | FSTN |
| Driver IC | ST7567A |
| Interface | SPI |
| Operating Temperature | -20°C to 70°C |
| Storage Temperature | -30°C to 80°C |
| Dot Pitch | 0.3mm x 0.3mm |
| Dot Size | 0.28mm x 0.28mm |
| Origin | Mainland China |

4. Setup
4.1 Pin Description
The module features a 10-pin interface for connection to your microcontroller. Refer to the table below and the module's back view for pin identification.
| PIN | DESCRIPTION |
|---|---|
| 1 | GND (Ground) |
| 2 | VCC (Power Supply) |
| 3 | SCL (Serial Clock) |
| 4 | SDA (Serial Data) |
| 5 | DC (Data/Command Selection) |
| 6 | RST (Reset) |
| 7 | CS (Chip Select) |
| 8 | BL (Backlight Control) |
| 9 | CS-F (Chip Select for Flash/Font, if applicable) |
| 10 | OUT (Output, typically not used for basic display) |
4.2 Connection Guidelines
Connect the module to your microcontroller using the SPI interface. Ensure correct voltage levels for VCC and proper signal connections for SCL, SDA, DC, RST, and CS. The BL pin can be connected to a digital pin for backlight control or directly to VCC for constant illumination.

5. Operating Instructions
To operate the 12864 SPI LCD Module, you will typically need a microcontroller (e.g., Arduino) and a compatible library for the ST7567A driver IC. The general steps involve:
- Initialization: Power up the module and initialize the display driver via SPI. This usually involves sending a sequence of commands to set up the display mode, contrast, and other parameters.
- Clearing the Display: Before drawing, clear the display buffer to ensure a clean screen.
- Drawing Graphics/Text: Use library functions to draw pixels, lines, shapes, or display text. The display is monochrome, so pixels are either on or off.
- Updating the Display: After drawing to the buffer, send the buffer content to the LCD module to update the physical display.
Refer to the documentation of your chosen microcontroller and display library for specific code examples and detailed API usage.
6. Maintenance
- Cleaning: Use a soft, dry, anti-static cloth to gently wipe the display surface. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the module in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep it in its original packaging or an anti-static bag when not in use.
- Handling: Handle the module by its edges to avoid touching the display area or the electronic components on the back. Static electricity can damage the module, so use appropriate ESD precautions.
7. Troubleshooting
- No Display/Blank Screen:
- Check all power connections (VCC, GND) and ensure they are stable.
- Verify SPI connections (SCL, SDA, DC, RST, CS) are correct and secure.
- Confirm the backlight (BL) pin is properly powered or controlled.
- Ensure the display initialization code is executed correctly.
- Garbled or Incorrect Display:
- Double-check the SPI communication protocol and timing.
- Verify that the correct display library for the ST7567A driver is being used.
- Ensure the data/command (DC) pin is toggled correctly when sending data versus commands.
- Check for any loose connections or shorts on the PCB.
- Partial Display:
- This could indicate an issue with the display buffer or the update routine. Ensure the entire buffer is being sent to the display.
- Physical damage to the LCD panel can also cause partial display issues.
8. User Tips
- Always start with a simple 'Hello World' or pixel drawing example to confirm basic functionality before integrating into complex projects.
- When experimenting with contrast settings, make small adjustments and observe the display to find the optimal value for your environment.
- Consider using a breadboard for initial prototyping to easily verify and troubleshoot connections.
9. Warranty and Support
Specific warranty details for this product are not provided in the available information. For any technical support, warranty claims, or further inquiries, please contact the seller directly through the platform where the product was purchased. Ensure you have your order details readily available.