1. Introduction
The Xinyi Sini Audio Bluetooth Digital Stereo Amplifier Board (Model XY-C50L) is a high-fidelity, two-channel stereo power amplifier designed for various audio applications. It features Bluetooth 5.0 connectivity, AUX input, and USB input, allowing direct connection to mobile phones, MP3 players, and other audio sources. This board delivers 50W per channel, providing robust sound for speakers ranging from 10W to 200W.
2. Safety Information
- Ensure the power supply voltage is within the specified DC 5-24V range. Incorrect voltage can damage the device.
- Observe correct polarity when connecting the power supply and speakers to prevent short circuits and damage.
- Avoid exposing the amplifier board to moisture, water, or extreme temperatures.
- Do not touch the circuit board components while the device is powered on.
- Keep out of reach of children.
3. Package Contents
- 1x Xinyi Sini Audio Bluetooth Digital Stereo Amplifier Board (XY-C50L)
- 1x Free DC Adapter (as shown in product images)
4. Product Overview
The XY-C50L amplifier board is compact and designed for easy integration into various audio projects. It features a rotary encoder for intuitive control and multiple input options.


5. Setup Instructions
5.1 Wiring Diagram
Refer to the diagrams below for proper connection of power, speakers, and audio inputs.


5.2 Power Supply Connection
- Connect a DC power supply (5-24V) to the DC input terminal on the board. Ensure the positive and negative terminals are connected correctly.
- The board is compatible with a standard DC adapter, often provided.

5.3 Speaker Connection
- Connect your passive speakers (4-16 Ohm, 10W-200W) to the 'SPKL' (Left Channel) and 'SPKR' (Right Channel) terminals.
- Pay close attention to the positive (+) and negative (-) markings for each channel to ensure correct stereo imaging.
5.4 Audio Input Connection
- AUX Input: Connect your audio source (e.g., mobile phone, MP3 player) using a 3.5mm audio cable to the AUX audio input jack.
- USB Input: Insert a U disk (formatted to FAT32, maximum 32GB) into the USB port for direct playback. Alternatively, the USB port can function as a USB sound card input.
- Bluetooth Input: The board will automatically enter Bluetooth pairing mode when powered on.
6. Operating the Amplifier
6.1 Power On/Off
- To Power On: Long press the rotary encoder knob.
- To Power Off: Long press the rotary encoder knob again.
6.2 Playback Control
- Play/Pause: Short press the rotary encoder knob to toggle between play and pause.
- Volume Control: Rotate the encoder knob clockwise to increase volume and counter-clockwise to decrease volume. The stepless tuning provides smooth adjustment.
6.3 Bluetooth Pairing
- Once powered on, the amplifier board will automatically enter Bluetooth pairing mode.
- On your audio device (e.g., smartphone), search for Bluetooth devices and select the amplifier (usually named 'Sinilink' or similar).
- Once paired, audio will stream wirelessly to the amplifier.
6.4 Input Mode Selection
The amplifier automatically detects the active audio input. If multiple sources are connected, it typically prioritizes Bluetooth, then USB, then AUX. Disconnect unused sources if you experience unexpected input switching.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | 5.0 Channel Power Amplifier Dual Board |
| Model | XY-C50L |
| Input Voltage | DC 5-24V |
| Bluetooth Version | 5.0 |
| Output Impedance | 4 ~ 16 Ohm (for speakers) |
| Recommended Speakers | 10W ~ 200W |
| Output Power | 50W * 2 (Dual Channel) |
| Audio Input | AUX (3.5mm), USB, Bluetooth |
| Number of Channels | Two Channels (Stereo) |
| USB Disk Support | FAT32 file system, Max 32GB |
| Dimensions (L x W) | 56mm x 50mm |
8. Troubleshooting
- No Sound:
- Check power supply connection and ensure the board is powered on.
- Verify speaker connections and polarity.
- Ensure the volume is turned up on both the amplifier and the audio source.
- Confirm the correct audio input mode is active (Bluetooth, AUX, or USB).
- Bluetooth Not Connecting:
- Make sure the amplifier is powered on and in pairing mode (usually indicated by a flashing LED).
- Ensure your audio device's Bluetooth is enabled and visible.
- Try restarting both the amplifier and your audio device.
- Move closer to the amplifier to ensure a strong signal.
- Distorted Sound:
- Reduce the volume on both the amplifier and the audio source.
- Check speaker impedance compatibility (4-16 Ohm).
- Ensure speaker wires are securely connected and not frayed.
- USB Playback Issues:
- Verify that the U disk is formatted to FAT32 and does not exceed 32GB.
- Check if the audio files on the U disk are in a supported format.
9. User Tips
- For optimal sound quality, use high-quality speakers within the recommended power range.
- When using the AUX input, ensure the cable is fully inserted into both the amplifier and your audio source to prevent hum or static.
- Consider using a dedicated power supply with sufficient current capacity for maximum output power, especially when driving larger speakers.
- The rotary encoder offers precise volume control; adjust it gradually for the desired sound level.
10. Maintenance
- Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
- Do not use liquid cleaners or solvents, as they may damage the components.
- Store the board in a cool, dry place when not in use.
- Ensure adequate ventilation around the board, especially during prolonged operation, to prevent overheating. The integrated heatsink helps dissipate heat.
11. Warranty and Support
For any issues or technical support, please contact the seller or manufacturer. Keep your purchase records for warranty claims, if applicable. Specific warranty terms may vary by region and seller.