COOLLEO B40S DIG V2 CPU Cooler Instruction Manual

Introduction

The COOLLEO B40S DIG V2 is a high-performance CPU air cooler designed to efficiently dissipate heat from your processor. Featuring 4 heat pipes, a 133mm height, and a fan with 44.2 CFM airflow, it offers robust cooling capabilities. A key feature is its intelligent digital display, providing real-time CPU temperature and power consumption data, along with visual warnings for high temperatures. This cooler is compatible with a wide range of Intel and AMD sockets, including LGA1700, 115X, 1200, AM4, and AM5.

Important Note: The digital display requires driver installation to function correctly. The necessary driver software can be downloaded from https://www.coolleo.com/downloads. If you encounter any difficulties, please contact the seller for assistance.

Package Contents

Please verify that all components listed below are included in your package:

Image: Detailed view of all included accessories for installation.

• A: Radiator (x1)
• B: Intel Backplane (x1)
• C: Universal Bracket (x1)
• D: Thermal Grease (x1)
• E: Universal Isolation Column (x4)
• F: 1700 Isolation Column (x4)
• G: Bracket Screws (Intel) (x4)
• H: Bracket Screws (AMD) (x4)

Specifications

Image: Product parameters and fan specifications.

Installation Guide

1. Intel Platform Installation (LGA 115X/1200/1700/1851)

1.1 Backboard Adjustment

1. Locate the Intel backplane (B).
2. Slide the buckle on the Intel backplane to the corresponding platform slot.
3. For LGA115X/1200 platforms, slide the buckle inward.
4. For LGA1700/1851 platforms, slide the buckle outward.

Image: Diagram showing how to adjust the Intel backplane for different socket types.

1.2 Bracket Installation

1. Before installation, peel off the backing tape from the Intel backplane (B).
2. Insert the Intel backplane from the back of your motherboard.
3. From the front of the motherboard, place the universal isolation columns (E) and the universal bracket (C) in sequence.
4. Use the Intel bracket screws (G) to secure the brackets to the backplane. Note: For LGA1700/1851 platforms, use the specific 1700 isolation columns (F) instead of the universal ones.

Image: Step-by-step diagram for installing the Intel mounting bracket.

1.3 Radiator Body Installation

1. Apply thermal grease (D) evenly onto the surface of your CPU.
2. Remove the protective film from the bottom of the radiator.
3. Carefully place the radiator onto the CPU and secure it to the installed bracket using the provided screws.

Image: Diagram showing thermal paste application and radiator mounting.

2. AMD Platform Installation (AM4/AM5)

2.1 Bracket Installation

1. Remove the original AMD plastic retention brackets from your motherboard, but keep the existing AMD backplate.
2. Place the universal isolation columns (E) and the universal bracket (C) onto the motherboard.
3. Fix the bracket to the backplate using the AMD bracket screws (H).

Image: Diagram for installing the AMD mounting bracket.

2.2 Radiator Body Installation

1. Apply thermal grease (D) evenly onto the surface of your CPU.
2. Remove the protective film from the bottom of the radiator.
3. Carefully place the radiator onto the CPU and secure it to the installed bracket using the provided screws.

Image: Diagram showing thermal paste application and radiator mounting for AMD.

Wiring Diagram

1. Insert the 4-pin connector of the fan into the "CPU-FAN" socket on your motherboard.
2. For ARGB versions only: Insert the fan ARGB connector into the "5V_RGB" socket on your motherboard. If you have a non-ARGB version, please ignore this step.

Image: Visual guide for connecting the CPU fan (4-pin) and optional ARGB (5V_RGB) cables to the motherboard.

Digital Display Connection & Software

1. Connect the 9-pin USB interface cable from the digital display screen to a 9-pin USB 2.0 socket on your motherboard. This connection provides both power and data exchange for the display.
2. Download the "COOLLEO Digital" control software from the official website: https://www.coolleo.com/downloads.
3. The software is provided as a free installation version. Download and decompress the file.
4. Double-click the application (e.g., "Cooleo_Sigital") in the startup package. The software is designed to start automatically upon first launch. Please agree to any prompts.
5. Once launched, the software will minimize to the taskbar tray. You can right-click the icon in the tray to access further settings.
6. If the digital display screen shows abnormalities, try unplugging and re-plugging the 9-pin USB interface to restart the hardware, then restart the "COOLLEO Digital" software.

Image: Diagram showing the 9-pin USB 2.0 connection for the digital display.

Operating Instructions

The COOLLEO B40S DIG V2 features an intelligent digital display that provides real-time monitoring of your CPU's performance:

• Real-time Display: The screen visually presents your CPU's current temperature and power consumption.
• Temperature Warning:
  • A yellow prompt is displayed when the CPU temperature exceeds 60°C.
  • A red prompt is displayed when the CPU temperature exceeds 80°C.

These visual cues help you monitor your CPU's usage status and take action if temperatures become critical.

Image: Illustration of the digital display showing temperature and power, with color-coded warning levels.

Maintenance

Regular maintenance helps ensure optimal performance and longevity of your CPU cooler:

• Dust Removal: Periodically clean the fan blades and heatsink fins to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air or a soft brush.
• Thermal Paste: Over time, thermal paste can dry out. If you notice a significant increase in CPU temperatures, consider reapplying fresh thermal paste. This typically involves removing the cooler, cleaning off old paste, and applying new paste before re-mounting.
• Fan Inspection: Check the fan for any signs of wear, damage, or unusual noise. Ensure the fan is securely mounted and spinning freely.

Troubleshooting

• Digital Display Not Working / Showing Abnormalities:
  • Ensure the 9-pin USB 2.0 cable is securely connected to both the display and the motherboard.
  • Try unplugging and re-plugging the USB cable.
  • Restart the "COOLLEO Digital" software.
  • Verify that the correct driver software is installed from https://www.coolleo.com/downloads.
• High CPU Temperatures:
  • Check if the fan is spinning correctly.
  • Ensure the heatsink fins are free of dust and debris.
  • Verify that the cooler is securely mounted to the CPU and that thermal paste was applied correctly.
  • Check your system's airflow and case ventilation.
• Fan Not Spinning:
  • Ensure the 4-pin PWM fan connector is properly plugged into the "CPU-FAN" header on your motherboard.
  • Check your motherboard's BIOS/UEFI settings to ensure the CPU fan header is enabled and configured correctly.
• ARGB Lighting Not Working (if applicable):
  • Ensure the 5V-3pin ARGB connector is properly connected to the corresponding header on your motherboard.
  • Check your motherboard's ARGB control software for lighting settings.

User Tips

• For optimal cooling, ensure good airflow within your PC case. Proper intake and exhaust fan placement can significantly impact cooler performance.
• When installing, double-check that the protective film on the cooler's base is removed before applying thermal paste.
• The tilted neck design allows for easier installation without needing to remove the fan or blocking memory slots. Utilize this feature for a smoother build process.

Image: Diagram illustrating the tilted neck design for improved compatibility and ease of installation.

Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF available for download. You can access the PDF version of this manual via the following link:

View User Manual (PDF)

For technical assistance or product inquiries, please contact the seller or manufacturer directly through their official support channels.