LILYGO T-Embed SI4732

Contents

LILYGO T-Embed SI4732 ESP32-S3 Radio Development Board User Manual

Model: T-Embed SI4732

Brand: LILYGO

1. Introduction

The LILYGO® T-Embed SI4732 is an upgraded version of the T-Embed series, featuring the SI4732 digital radio receiver chip. This board is designed to support AM, FM, SW, and LW broadcast bands, offering a versatile platform for radio enthusiasts and developers. It boasts high signal sensitivity, low power consumption, and integrated DSP (digital signal processing) capabilities, making it suitable for advanced radio and audio applications.

The T-Embed base unit features a rounded rectangular form factor, integrating a rotary encoder with an LED ring, a 1.9-inch IPS TFT display, an onboard microphone and speaker, a TF card slot, and a power management circuit that supports 3.7V Li-ion battery power. Additionally, it includes GROVE and 2.54mm GPIO headers, providing extensive expandability for various projects.

2. Product Overview

2.1 Key Features

  • Radio Chip: SI4732 digital radio receiver (AM/FM/SW/LW/RDS)
  • Microcontroller: ESP32-S3 Dual-core LX7 microprocessor
  • Wireless Connectivity: 2.4G Wi-Fi 802.11 b/g/n, BLE 5
  • Display: 1.9-inch ST7789 IPS TFT LCD (170x320 resolution)
  • User Interface: Rotary encoder with LED ring
  • Audio: Onboard microphone and speaker
  • Storage: TF card slot
  • Power: 3.7V Li-ion battery support, USB Type-C for power/charging
  • Expansion: GROVE and 2.54mm GPIO headers

2.2 Component Identification

LILYGO T-Embed Si4732 Pinmap
Figure 1: LILYGO T-Embed Si4732 Pinmap and Component Layout. This diagram details the pin assignments for the LCD, Microphone, Encoder, Grove connector, JST connector, USB Type-C port, GPIO, TF Card Slot, and the SI4732 Module Location.
Exploded view of T-Embed SI4732 components
Figure 2: Exploded view showing the internal components and modular design of the T-Embed SI4732.

3. Setup

3.1 Package Contents

Ensure all items are present:

  • LILYGO T-Embed SI4732 Development Board
  • Telescopic Antenna (104mm or 310mm, depending on variant)
  • USB Type-C Cable (may be included)
  • Protective Case (may be included)
T-Embed SI4732 in its protective case with antenna
Figure 3: The T-Embed SI4732 device shown with its protective case and included antenna.

3.2 Antenna Installation

  1. Locate the antenna connector on the device (refer to Figure 1).
  2. Carefully screw the telescopic antenna into the connector until secure.
  3. For optimal reception, extend the antenna fully when operating the radio.
T-Embed SI4732 with antenna attached
Figure 4: The T-Embed SI4732 with the telescopic antenna attached.

3.3 Powering the Device

The T-Embed SI4732 can be powered via its USB Type-C port or an internal 3.7V Li-ion battery (if installed). Connect a USB Type-C cable to a suitable power source (e.g., computer USB port, USB wall adapter) to power the device and charge the battery.

3.4 TF Card Insertion

If you plan to use the TF card slot for data storage or firmware, gently insert a compatible TF card into the designated slot (refer to Figure 1 for location) until it clicks into place.

3.5 Development Environment Setup (for advanced users)

For custom firmware development, the board supports Arduino-IDE and ESP-IDF programming platforms. Refer to the official LILYGO GitHub repository for sample code, libraries, and detailed setup instructions:

4. Operating Instructions

4.1 Power On/Off

Locate the power button (refer to Figure 1, labeled 'Power_On'). Press and hold to power on or off the device.

4.2 Basic Navigation

The rotary encoder with its integrated button is the primary interface for controlling the device:

  • Rotate: Turn the encoder left or right to navigate through menus, adjust frequency, or change volume.
  • Press: Press the encoder button to select an option, confirm a setting, or toggle functions.

4.3 Radio Operation

The 1.9-inch IPS TFT display shows radio information and menu options. The SI4732 chip supports AM, FM, SW, and LW bands.

T-Embed SI4732 display showing radio interface
Figure 5: The T-Embed SI4732 display showing the radio interface with frequency, band, mode, step, BFO, AGC, and volume settings. Menu options for 'Brightness setting', 'lights off', 'Gradient', 'rotate', and 'independant' are also visible.
  1. Select Band: Use the rotary encoder to navigate to the 'Band' setting and select your desired band (VHF/FM, AM, SW, LW).
  2. Tune Frequency: Rotate the encoder to adjust the frequency within the selected band. The display will show the current frequency.
  3. Adjust Volume: Navigate to the 'VOL' setting and rotate the encoder to increase or decrease the volume.
  4. DSP Features: The SI4732 chip includes DSP for enhanced audio quality and signal processing. Specific DSP settings may be accessible via the device's menu.

4.4 Display Settings

As shown in Figure 5, the device's menu allows for customization of the display:

  • Brightness setting: Adjust the screen brightness.
  • Lights off: Turn off the display backlight.
  • Gradient: Potentially refers to a display color gradient or effect.
  • Rotate: Change the screen orientation.
  • Independant: Further display customization options.

4.5 Audio Input/Output

  • Microphone: The onboard microphone can be used for audio input, depending on the loaded firmware.
  • Speaker: Audio output is provided via the onboard speaker.
  • External Audio: The GROVE and GPIO headers may allow for external audio connections with appropriate modules.

5. Maintenance

5.1 Cleaning

Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing.

5.2 Battery Care

  • Charge the 3.7V Li-ion battery regularly to maintain its health.
  • Avoid fully discharging the battery for extended periods.
  • If storing the device for a long time, charge the battery to approximately 50% and store in a cool, dry place.

5.3 Firmware Updates

Periodically check the LILYGO GitHub repository for firmware updates. Updating the firmware can provide new features, bug fixes, and performance improvements. Follow the instructions provided on the GitHub page for safe firmware flashing.

6. Troubleshooting

6.1 No Power

  • Ensure the device is charged or connected to a stable USB Type-C power source.
  • Check the USB cable for damage and try a different cable or power adapter.
  • If using battery power, ensure the battery is properly connected and charged.

6.2 Poor Radio Reception

  • Ensure the telescopic antenna is fully extended and positioned for optimal signal.
  • Try moving to a different location, away from potential interference sources (e.g., other electronic devices, large metal objects).
  • Check the selected radio band and frequency for accuracy.

6.3 Display Issues

  • Check display brightness settings via the menu.
  • If the screen is unresponsive, try restarting the device.

6.4 Further Assistance

For more complex issues or technical support, visit the LILYGO GitHub community:

7. Specifications

T-Embed SI4732 Specifications
Figure 6: Detailed specifications for the T-Embed SI4732.
ComponentSpecification
MCUESP32-S3 Dual-core LX7 microprocessor
Wireless Connectivity2.4G Wi-Fi 802.11 b/g/n, BLE 5
Programming PlatformArduino-IDE, ESP-IDF
Flash16MB
PSRAM8MB
Radio ICSi4732-A10 CMOS AM/FM/SW/LW/RDS radio receiver IC
Display1.9 inch ST7789 IPS TFT LCD
Display InterfaceSPI
Display TypeTFT LCD, Full color
Display Drive ChipST7789
Display Resolution170(H)RGB x 320(V)
FM Band64-108 MHz (Worldwide)
AM Band520-1710 kHz (Worldwide)
SW Band2.3-26.1 MHz
LW Band153-279 kHz
Antenna Length Options104mm or 310mm
Dimensions (L x W x H)98mm x 39mm x 39mm
Weight0.174 kg
T-Embed SI4732 product dimensions
Figure 7: Physical dimensions of the T-Embed SI4732 device and its telescopic antenna.

8. User Tips

  • Experiment with Antenna Position: For optimal reception, especially on SW and LW bands, try different antenna orientations and extensions.
  • Explore GitHub: The LILYGO GitHub repository is an invaluable resource for community-contributed projects, alternative firmware, and advanced usage examples.
  • Customization: The GROVE and GPIO headers allow for extensive customization. Consider adding external sensors, displays, or other modules to expand the device's functionality.

9. Warranty and Support

For technical support, documentation, and community engagement, please refer to the official LILYGO GitHub page:

Please note that as a development board, support primarily focuses on hardware functionality and providing resources for software development. Specific warranty details may vary; please consult your point of purchase for warranty information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.