IPEGA PG-SW2185

Contents

IPEGA PG-SW2185 Joycon Charging Dock Station User Manual

Model: PG-SW2185

Introduction

The IPEGA PG-SW2185 is a 4-in-1 charging dock station designed for Nintendo Switch Joy-Con controllers. This dock allows you to conveniently charge up to four Joy-Cons simultaneously, ensuring your controllers are always ready for gameplay. It is specifically designed to be compatible with the Nintendo Switch 2 original base.

Setup Instructions

  1. Assemble the Charging Dock: Connect the two parts of the charging dock (the L-shaped base and the main charging unit) as shown in the video.
  2. Connect to Nintendo Switch 2 Base: Carefully insert the assembled charging dock into the USB port of your Nintendo Switch 2 original base. Ensure a snug fit.
  3. Secure the Product: Remove any protective film from the fixed surface of the host and ensure the charging dock is firmly attached to the Switch 2 base.
  4. Power Connection: The charging dock requires the original Nintendo Switch 2 power adapter for operation. Connect the power adapter to your Switch 2 base.

For a visual guide, please refer to the setup demonstration video below:

Instructional video demonstrating the assembly, connection, and charging process of the IPEGA PG-SW2185 dock.

Images illustrating the product and its components:

Side view of the IPEGA PG-SW2185 charging dock without controllers, showing the four charging slots and the detachable L-shaped base.
Side view of the charging dock components.
Rear view of the IPEGA PG-SW2185 charging dock, showing the USB-C input port.
Rear view showing the USB-C input.

Operating Instructions

  1. Power On: Once the product is powered on and connected to the Switch 2 base, the four Joypad charging indicator lights (A, B, C, D) will illuminate blue, indicating standby mode.
  2. Charging Joy-Cons: Insert your Joypad controllers into any of the four available charging slots. The design allows for reversible insertion.
  3. Charging Indication: While a Joy-Con is charging, its corresponding indicator light will turn orange.
  4. Full Charge Indication: Once the Joy-Con is fully charged, its indicator light will change back to blue.

Visual representation of the charging dock in use:

IPEGA PG-SW2185 4-in-1 Charging Dock Station for Switch2, showing the dock with four Joy-Cons inserted and a detached L-shaped base.
Charging dock with Joy-Cons inserted.
Angled view of the IPEGA PG-SW2185 charging dock with four Joy-Cons, showing the 'iPega' branding and LED indicators.
Close-up of charging indicators.

Maintenance

  • Keep the charging dock clean and dry. Use a soft, dry cloth to wipe away dust or smudges.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
  • Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the product's finish.
  • When not in use for extended periods, store the charging dock in a safe, cool, and dry place.
  • Ensure no foreign objects enter the charging slots.

Troubleshooting

  • Controllers not charging:
    • Ensure the charging dock is properly connected to the Nintendo Switch 2 original base.
    • Verify that the original Nintendo Switch 2 power adapter is connected and functioning correctly.
    • Check if the Joy-Cons are correctly inserted into the charging slots. Try re-inserting them.
  • Indicator lights not working:
    • Confirm that the charging dock is receiving power.
    • If only specific lights are not working, try inserting a different Joy-Con into that slot to rule out a controller issue.
  • Loose connection to Switch 2 base:
    • Ensure the charging dock is securely and fully seated in the USB port of the Switch 2 base.
    • Check for any obstructions in the USB port or on the dock's connector.

Specifications

FeatureDetail
BrandIPEGA
ModelPG-SW2185
Compatible BrandNintendo
Compatible Nintendo ModelNintendo Switch
Charging Capacity4 Joy-Con controllers simultaneously
Indicator LightsBlue (standby/charged), Orange (charging)
OriginMainland China
Package Length22 cm
Package Width13 cm
Package Height5 cm
Package Weight0.163 kg

User Tips

  • For optimal charging speed and stability, always ensure a stable connection to the original Nintendo Switch 2 dock and use its dedicated power adapter.
  • The reversible design of the charging slots offers convenience, allowing you to insert Joy-Cons without worrying about orientation.
  • Keep an eye on the LED indicators: blue means ready or fully charged, orange means actively charging. This helps quickly identify charging status.

Warranty and Support

For any product support, warranty claims, or technical assistance, please contact the retailer or refer to the official IPEGA website for their customer service contact information. Keep your proof of purchase for warranty purposes.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.