FLIPSKY FT85BD ESC

Contents

FLIPSKY FT85BD ESC Instruction Manual

High-Performance Speed Controller for Electric Vehicles

1. Product Overview

The FLIPSKY FT85BD ESC (Electronic Speed Controller) is a dual-drive, high-performance controller designed for various electric vehicles, including electric skateboards, scooters, ebikes, and motorcycles. It features an aluminum case for durability and heat dissipation, and offers advanced control capabilities and protection functions.

FLIPSKY FT85BD ESC with main power and motor wires connected
Figure 1: FLIPSKY FT85BD ESC with main power and motor wires.

2. Specifications

Feature Specification
Firmware V1.2 or above (update via Flipsky ESC Tool)
Voltage Range 14-84V (safe for 4S-20S battery configurations)
Continuous Current 100A / Single; 200A / Dual (dependent on mounting and ambient temperature)
Peak Current 250A / Single; 500A / Dual
Communication Ports USB, CAN, UART, PPM, ADC
Input Signals Support PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present)
Startup Modes Support IPDS (sensorless), HFPI (sensorless), HALL (sensored)
BEC Output 5V@1A
Speed Gear Levels Low, Medium, High, Reverse
External Device Support Front Lights, Rear Brake Lights & Horn
Programmable Yes
Regenerative Capacity Yes
Smart Switch Functions Slide Poweron & Auto shutdown (adjustable)
Self-resetting Switch Diameter 16mm (green LED button)
Power Wire Size 10AWG
Motor Wire Size 12 AWG
Dimensions (Including Alu. Case) L132*W81*H26.5mm
Material Metal
IP Rate IP65
FLIPSKY FT85BD ESC with dimensions labeled
Figure 2: Dimensions of the FT85BD ESC.

3. Features

  • Advanced CPU: Utilizes CPU AT32F403ARCT7 with ARM Cortex-M4 structure, offering a 240MHz clock speed and a max PWM switching frequency of 45KHz for improved motor RPM.
  • Versatile Programmability: Fully programmable via the Flipsky ESC Tool, allowing compatibility with various motor types, battery voltages, and control methods. Also programmable via Flipsky remote controller VX4 (firmware VX4_V1.2.1 or above).
  • Motor Control: Supports Motor FOC (Field-Oriented Control) for low working noise and smooth starting.
  • Real-time Monitoring: Provides real-time data and fault alerts for efficient operation and diagnostics.
  • Adaptive PWM: Features adaptive variable PWM frequency control.
  • Sensor Modes: Supports both sensor mode (HALL) and sensorless modes (IPDS, HFPI).
  • Control Types: Supports Current and Duty Cycle control types.
  • Comprehensive Protection: Includes low and high voltage protection, over-current protection, abnormal temperature protection, MOSFETs over-temperature and over-current protection, battery over-discharge protection, and motor over-temperature protection.
  • Integrated Smart Switch: Supports sliding power-on and automatic shutdown functions. The automatic shutdown time is adjustable via the ESC Tool.
  • Accessory Interfaces: Provides extra interfaces for front lights, rear brake lights, and horn fixtures.

4. Setup and Installation

Careful wiring is crucial for the proper function and safety of your ESC and connected components. Refer to the diagrams below for correct connections.

4.1 Wiring Diagram Overview

Overall wiring diagram for FLIPSKY FT85BD ESC showing connections for battery, motors, power switch, brake light, front light, and horn.
Figure 3: Overall Wiring Diagram. Connect the battery to the main power input, motors to the motor outputs, and accessories to their respective ports.

4.2 Detailed Port Labels

This diagram provides a closer look at the labels for each port on the ESC, indicating their function.

Detailed port labels on the FLIPSKY FT85BD ESC, showing PPM, USB, CAN, UART, ADC, HALL, Power Switch, Brake Light, Front Light, and Horn connections.
Figure 4: Detailed Port Labels. Identify each port for correct accessory and communication connections.

4.3 Detailed Port Pinouts

For advanced users and custom wiring, this diagram shows the pinout configuration for each communication and accessory port.

Detailed pinout diagram for each port on the FLIPSKY FT85BD ESC, including voltage, ground, and signal lines for PPM, USB, CAN, UART, ADC, HALL, and power switch.
Figure 5: Detailed Port Pinouts. Essential for custom wiring and connecting specific sensors or modules.

4.4 Initial Setup Steps

  1. Connect Battery: Ensure your battery is within the 4S-20S range (14-84V). Connect the main power wires (10AWG) from the battery to the ESC's battery input. Observe correct polarity.
  2. Connect Motors: Connect your motors to the ESC's motor outputs using 12AWG wires. Ensure phase wires are correctly matched.
  3. Connect Power Switch: Install the 16mm self-resetting switch to the designated power switch port.
  4. Connect Accessories (Optional): If using, connect front lights, rear brake lights, and horn to their respective ports as shown in the wiring diagrams.
  5. Connect Communication (Optional): For remote control, connect your FLIPSKY VX4 or VX3Pro remote via UART. Other communication methods like PPM, CAN, or USB can also be used depending on your setup.
  6. Initial Configuration: Use the Flipsky ESC Tool via USB to configure motor parameters, battery settings, and other preferences. Ensure the firmware is V1.2 or above.

5. Operating Instructions

  • Power On: The ESC supports 'Slide Poweron'. Gently push your electric vehicle forward to activate the ESC. Alternatively, press the self-resetting switch if configured for manual power-on.
  • Speed Control: Utilize your connected remote controller (e.g., FLIPSKY VX4/VX3Pro) to control the speed. The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse.
  • Braking: The ESC supports regenerative braking, which helps recharge the battery during deceleration.
  • Accessory Control: If connected, control front lights, rear brake lights, and horn via your remote or other integrated controls.
  • Automatic Shutdown: The ESC features an 'Auto shutdown' function. If the vehicle is inactive for a set period (adjustable via ESC Tool), the ESC will power off automatically to conserve battery.

6. Maintenance

  • Regular Inspection: Periodically check all wiring connections for looseness or damage. Ensure the ESC is securely mounted.
  • Cleanliness: Keep the ESC and its surroundings clean from dust, dirt, and debris. While the ESC has an IP65 rating for dust and water resistance, excessive exposure to harsh conditions should be avoided.
  • Firmware Updates: Regularly check the official FLIPSKY website for new firmware versions. Updating the firmware via the Flipsky ESC Tool can improve performance and add new features.
  • Temperature Monitoring: Ensure adequate airflow around the ESC, especially during high-current operation, to prevent overheating.

7. Troubleshooting

  • No Power:
    • Check battery connections and ensure the battery is charged.
    • Verify the power switch is correctly wired and functioning.
    • Ensure the 'Slide Poweron' feature is enabled or try manually activating the switch.
  • Motor Not Spinning/Irregular Operation:
    • Check motor phase wire connections.
    • Verify sensor (HALL) connections if using sensored mode.
    • Use the Flipsky ESC Tool to check motor detection and configuration.
    • Check for fault alerts in the ESC Tool.
  • Overheating:
    • Ensure the ESC has sufficient airflow.
    • Reduce load or check for motor/battery issues that might cause excessive current draw.
    • Verify motor parameters in the ESC Tool.
  • Communication Issues:
    • For USB, ensure drivers are installed and the cable is functional.
    • For UART/CAN, check wiring and ensure correct baud rates/settings in the ESC Tool.
    • Ensure your remote's firmware is compatible (e.g., VX4_V1.2.1 or above for VX4).
  • Protection Triggered: The ESC has various protection functions (voltage, current, temperature). If the ESC shuts down unexpectedly, check the ESC Tool for fault codes to identify the specific protection that was triggered. Address the underlying cause (e.g., low battery, excessive load, high temperature).

8. User Tips

  • Accessory Inclusion: Note that while the ESC supports various accessories like lights and horns, these items and their connecting wires may not be included with all ESC variants. Always check the product description of your specific purchase to confirm included accessories.
  • Firmware Management: Keep your ESC firmware updated using the official Flipsky ESC Tool for optimal performance and access to the latest features.
  • Remote Compatibility: If using a Flipsky remote, ensure its firmware version meets the requirements for full compatibility with the FT85BD ESC.

9. Warranty and Support

For warranty information, technical support, and further assistance, please refer to the official FLIPSKY website or contact your retailer. Keep your purchase records for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.