1. Introduction
Thank you for purchasing the GMAIPOP F410 4-Channel WiFi Dashcam. This device is designed to provide comprehensive surveillance for your vehicle, offering 360° recording capabilities with front, left, right, and optional rear cameras. Featuring Full HD 1080P recording, night vision, loop recording, G-sensor, and parking monitoring, this dashcam ensures your driving and parked vehicle are protected. Please read this manual carefully before use to ensure proper installation and operation.

2. Setup
2.1. Package Contents
Before installation, please verify that all items are present in your package:
- GMAIPOP F410 Dashcam Unit
- Suction Mount Bracket
- Car Charger (3m cable)
- Rear Camera (6m cable)
- Hardwire Kit (optional, if purchased)
- User Manual (this document)
- Micro-SD Card (optional, if purchased)

2.2. Dashcam Buttons and Ports
Familiarize yourself with the dashcam's controls and connections:

| No. | Name | Function |
|---|---|---|
| 1 | Reset hole | Resets the Dashcam. |
| 2 | Power button | Long-press for ~3s to turn ON/OFF. |
| 3 | OK button | Short-press to start/stop recording, play/pause video, or enter/save settings. |
| 4 | Up button | Scroll up in menu, switch display windows (front, rear, left/right camera), or scroll to previous video files. |
| 5 | Down button | Scroll down in menu, mute audio, or scroll to next video files. |
| 6 | Menu/Mode | Long-press to enter Menu Settings (non-recording), short-press to exit Menu, or short-press to enter Video Playback Mode (non-recording). |
| 7 | Power slot (USB-C) | Connect a USB cable or car charger for power. |
| 8 | Rear camera port | Connect the rear camera. |
| 9 | TF Card slot | Insert a micro-SD card for recording and saving videos. |
| 10 | Fill light | Lights for right & left cameras, automatically activate in low brightness. |
2.3. Micro-SD Card Installation
Insert a Class 10 or higher micro-SD card (up to 128GB, formatted to FAT32) into the TF Card slot (9) on the dashcam. Ensure it is inserted correctly until it clicks into place.
2.4. Front Dashcam Installation
- Clean the Windshield: Thoroughly clean the area on your windshield where the dashcam will be mounted. Ensure it is free of dust, grease, and any residue.
- Attach Suction Bracket: Insert the suction bracket into the dashcam unit.
- Prepare Suction Cup: Ensure the protective film is removed from the suction cup and the cup itself is clean.
- Mount Dashcam: Attach the dashcam with the suction mount to the cleaned windshield. Adjust the camera lens to point forward and center.
- Secure Mount: Lock the suction bracket tightly to prevent it from falling during recording.


2.5. Car Charger Installation
Connect the car charger to the dashcam's USB-C power slot (7). Route the cable neatly along the car's interior. Always use the original car charger provided to avoid compatibility issues.


2.6. Rear Camera Installation
- Connect Rear Camera: Insert the rear camera cable into the rear camera port (8) on the main dashcam unit.
- Route Cable: Hide the cable into the top panel, then carefully loosen the side panel to insert the cable, especially if airbags are present. Continue inserting the cable along the door's rubber seal until you reach the trunk area.
- Trunk Panel: Loosen the trunk's panel and route the cable as shown in the diagram.
- Connect to Reversing Light (Optional): Connect the rear camera's red cable to the positive pole of your car's reversing light. This enables the reversing image to display automatically when shifting into reverse. If you do not need this feature, you can skip this step.
- Mount Rear Camera: Attach the 3M sticky tape to the rear camera's bracket and secure the rear camera in the middle and above the license plate frame. Adjust the angle as needed.
- Final Connection: Connect the rear camera to the wired cable, ensuring the two arrows align for a proper connection.


2.7. Hardwire Kit Installation (Optional)
If you purchased the hardwire kit for 24-hour parking monitoring, follow these steps. If you are unsure, it is recommended to seek professional assistance.


- Connect Power Interface: Connect the hardwire kit to the dashcam's power interface.
- Open Fuse Box: Locate and open your car's fuse box. The position may vary by vehicle model.
- Install Step-Down Line: Use an electric pen to identify the ACC (switched power) and constant power lines. Connect the red ACC wire of the step-down cable to the car's ACC fuse. Connect the yellow BAT wire to a constant power fuse.
- Connect Ground Wire: Connect the black ground wire to a metal screw on the car's chassis.
- Test Connection: Turn on the car to test the step-down line. The vehicle status light should turn on, and the dashcam should power on. If the ACC is connected correctly, the dashcam will enter parking monitoring mode when the car is off.
- Hide Wires: Neatly hide the wires along the edge of the car's interior.
- Close Fuse Box: Securely close the fuse box cover.
3. Operating Instructions
3.1. Basic Operation
- Power ON/OFF: Long-press the Power button (2) for approximately 3 seconds.
- Start/Stop Recording: In recording mode, short-press the OK button (3) once.
- Menu Navigation: Use the Up (4) and Down (5) buttons to navigate through menu options. Short-press the OK button (3) to select or save settings.
- Video Playback on Dashcam: Stop recording, then short-press the Menu/Mode button (6) to enter Playback Mode. Use Up (4) and Down (5) to browse files. Long-press Menu/Mode to delete or protect files. Short-press Menu/Mode to exit.
- Video Playback on PC: Remove the micro-SD card from the dashcam and insert it into a card reader connected to your PC to view recorded videos.
3.2. WiFi Connection & App Usage
The dashcam features a built-in WiFi module for connecting to a mobile app (Framefox / Viidure) to view and manage recordings. Note that the WiFi is for local data transfer to your phone and does not support remote internet access or SIM cards.

- Download App: Scan the QR code provided in the manual or search for "Viidure" or "Framefox" in your app store.
- Connect to Camera's WiFi:
- For iPhone: Go to your phone's Wi-Fi settings, select the camera's Wi-Fi network, and enter the default password:
12345678. Open the Viidure app to complete device addition. - For Android: Open the Viidure app, tap "Add Camera," and follow the on-screen guide. In your phone's Wi-Fi settings, select the camera's Wi-Fi network and enter the default password:
12345678. Return to the app to complete setup.
- For iPhone: Go to your phone's Wi-Fi settings, select the camera's Wi-Fi network, and enter the default password:
- App Functions:
- Camera: Manage devices, view live preview.
- Photo Album: Access and manage downloaded pictures/videos.
- More: Adjust app settings, language, provide feedback.
- Dashcam Functions via App:
- Taking Photos: Control the dashcam to capture photos.
- Video Playback: Switch between full-screen and zoomed views.
- Camera Files: Access categorized files (Loop Recordings, Photo Files, Emergency Events, Parking Monitoring).
- Camera Settings: Adjust recording resolution, microphone controls.
- Downloading & Managing Files: Navigate to "Camera Files" in the app, select desired media, and tap "Download." Files are arranged by date in the "Photo Album."
- Video Playback Options: Browse videos at various speeds (slow motion to 10x fast-forward).
- Document Editing: Use app features to crop images, apply filters, clip video segments, and add music.
3.3. G-Sensor
The built-in G-sensor automatically detects sudden impacts or collisions. When activated, it locks the current video file (10 seconds before and 30 seconds after the event) to prevent it from being overwritten by loop recording, ensuring critical footage is saved.

3.4. Loop Recording
The dashcam continuously records video in 1/3/5 minute segments. When the micro-SD card is full, the oldest unlocked video files are automatically overwritten to make space for new recordings. Files protected by the G-sensor or manually locked will not be overwritten.

3.5. Parking Monitor
With the hardwire kit installed, the dashcam can monitor your vehicle 24/7. If a collision or shaking is detected while parked, the dashcam will automatically turn on, record, and lock the video file. This feature also supports time-lapse recording to save memory space.

3.6. Night Vision & WDR
The dashcam features advanced night vision capabilities, including an F2.0 aperture and 4 infrared lights on the cabin camera, to capture clear recordings even in low-light or pitch-black conditions. Wide Dynamic Range (WDR) technology balances exposure, ensuring clear images in both very bright and very dark areas of the frame.

3.7. Safe Reversing System
When the rear camera is properly connected to your car's reversing light, the dashcam will automatically display a rear view with guide lines on its screen when you engage reverse gear, assisting you in safe parking and maneuvering.

4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the dashcam lens and screen. Avoid using abrasive cleaners or solvents.
- SD Card Management: Regularly format your micro-SD card (at least once a month) to ensure optimal performance and prevent data corruption. Back up important files before formatting.
- Firmware Updates: Check the manufacturer's website or app for any available firmware updates to improve performance and add new features.
- Power Source: Always use the original car charger or a compatible hardwire kit. Do not use generic USB cables or phone chargers, as they may not provide sufficient power and can cause malfunctions.

5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dashcam does not power on. | No power supply; faulty charger/cable. | Ensure original car charger is securely connected. Check car's cigarette lighter or hardwire kit connection. |
| WiFi connection issues with app. | Incorrect password; out of range; app malfunction. | Ensure correct password (12345678). Stay within 20m of the camera. Restart app/phone/dashcam. Reinstall app if necessary. |
| Rear camera not recognized or not displaying. | Loose connection; incorrect wiring. | Check all rear camera cable connections, especially the connection to the main unit and the reversing light (if applicable). Ensure arrows align on connectors. |
| Recordings are not saving or SD card is full. | SD card full; card error; incompatible card. | Format the SD card regularly. Ensure it's a Class 10, FAT32, max 128GB card. Replace if faulty. |
| Date/time settings are incorrect after power off. | Internal battery depleted or faulty. | The internal 150mAh battery is mainly for menu settings. Ensure continuous power supply to maintain settings. If issues persist, contact support. |
| Parking monitor not working 24/7. | Not hardwired; internal battery insufficient. | 24-hour parking monitoring requires the hardwire kit to be correctly installed and connected to constant power. The internal battery only supports short-term operation. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | GMAIPOP |
| Model | F410 |
| Assembly Mode | Portable Recorder |
| Number Of Lenses | 4 (Front, Left, Right, Rear) |
| Camera Resolution | Front 1920x1080P, Left/Right/Rear 720P |
| Pixels | 200Mega |
| View Angle | 170° (Front), 100° (Left/Right/Rear) |
| Maximum Video Frame Rate | 30 fps |
| Video Code | H.264 |
| Video Format | AVI |
| Display Size | 3"-5" (3.5 inch IPS) |
| Screen Ratio | 16:9 |
| Touch Screen | No |
| Rear Camera | Yes |
| Interface | AV-In, Wi-Fi, Micro SD/TF |
| Max External Memory | 128G (Class 10, FAT32) |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| NightShot Function | Yes |
| Special Features | G-Sensor, Display Rotate |
| GPS logger | NONE |
| Power Source | Corded electric (DC12-24V Input, DC5V 1A Output) |
| Battery | Built-in Lithium battery (150mAh) |
| Battery Life | Requires continuous power supply |
| Working Temperature | -20℃ to 65℃ |
| APP Compatibility | Framefox / Viidure |
| Weight | 0.5Kg |
| Cable Length | Car charger: 3 m; Rear cable: 6 m |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), English, French, Japanese, Korean, Russian, Spanish |
| Certification | CE, FCC |

7. User Tips
- Power Supply: Always use the original car charger or the dedicated hardwire kit. The internal battery is small (150mAh) and primarily for saving menu settings, not for continuous operation or extended parking monitoring. The device requires a constant power source to function.
- SD Card: Ensure your micro-SD card is Class 10 or higher, formatted to FAT32, and does not exceed 128GB for optimal performance. Regularly format the card to prevent issues.
- WiFi Connectivity: The dashcam's WiFi is designed for local connection to the mobile app for file transfer and live viewing. It does not provide remote internet access or support SIM cards. Maintain close proximity (within 20m) to the camera for a stable connection.
- Installation: While basic installation with the cigarette lighter is straightforward, hardwiring for 24-hour parking mode can be more complex. If you are not comfortable with electrical wiring, consider professional installation for the hardwire kit.
- Rear Camera: If the rear camera is not recognized, double-check all cable connections, ensuring they are secure and correctly aligned.
- Language Settings: The dashcam supports multiple languages including English, Chinese, Korean, Russian, Japanese, French, and Spanish. You can change this in the menu settings.

8. Warranty & Support
For any issues or questions regarding your GMAIPOP F410 Dashcam, please contact our professional after-sales team. When contacting support, please describe the problem you encountered and provide videos or photos if possible. You will not suffer any loss during the camera warranty period.
After-sales email: ricardozed23@gmail.com
You can also refer to the official item guides and documents for additional information: