1. Product Overview
The PowMr 10.2KW Hybrid Solar Inverter is a versatile power solution designed for both on-grid and off-grid solar applications. It features a pure sine wave output, dual MPPT solar charge controllers, and supports various battery types. This inverter is capable of handling a maximum PV array power of 10200W and provides a stable 220/230V AC output from a 48V DC input.

Figure 1: PowMr 10.2KW Hybrid Solar Inverter - Front View
Key Features:
- Pure sine wave solar inverter
- Capable of running without a battery
- Output power factor 1.0
- High PV input voltage range (90~500VDC)
- WIFI & GPRS connectivity for monitoring (modules sold separately)
- Built-in anti-dusk kit for harsh environments
- Smart battery charge design to optimize battery life
- One-click restoration to factory settings
- Dual output functionality
- Built-in Lithium battery automatic activation
- Intuitive touch button interface
2. Component Identification
Familiarize yourself with the inverter's components and connection ports before installation.

Figure 2: Labeled Diagram of Inverter Components and Ports
- LCD display
- Status indicator
- Charging indicator
- Fault indicator
- Touch Function buttons
- Power ON/OFF switch
- AC input
- Main output
- Second output
- PV 1 and PV 2 input
- RS232/WIFI/Remote LCD Communication Port
- Battery input
- Anti dust cover
3. Installation and Setup
Proper installation is crucial for the safe and efficient operation of your inverter. Ensure all connections are secure and follow local electrical codes.
3.1. Mounting the Inverter
- Choose a suitable location that is well-ventilated, dry, and away from direct sunlight or heat sources.
- Ensure the mounting surface can support the inverter's weight (14.5kg).
- Allow adequate clearance around the inverter for proper airflow and cooling.
3.2. Wiring Connections
Refer to Figure 2 for the location of all connection ports. All wiring should be performed by a qualified electrician.
- Battery Connection (12): Connect the 48V battery bank to the designated battery input terminals. Ensure correct polarity (positive to positive, negative to negative).
- PV Input Connection (10): Connect your solar PV array to the PV1 and PV2 input terminals. Observe the maximum PV array open circuit voltage (500Vdc) and MPPT voltage range (90-500Vdc).
- AC Input Connection (7): Connect the AC utility grid or generator to the AC input terminal.
- AC Output Connection (8, 9): Connect your loads to the Main Output and Second Output terminals.
- Communication Port (11): If using, connect the RS232 cable or optional WiFi/GPRS module for remote monitoring.

Figure 3: Rear View of Inverter with Connection Ports
3.3. Initial Power-Up
- Double-check all wiring connections for correctness and tightness.
- Turn on the battery breaker (if installed).
- Turn on the PV array breaker (if installed).
- Switch the inverter's Power ON/OFF switch (6) to the 'ON' position.
- Observe the LCD display (1) and status indicators (2, 3, 4) for normal operation.
4. Operation
The inverter offers multiple charging and output modes to suit various energy management needs.
4.1. LCD Display and Touch Buttons
The LCD display (1) provides real-time information about the system's status, including input/output voltage, current, power, and battery status. Use the touch function buttons (5) to navigate through menus and adjust settings.

Figure 4: Inverter LCD Display and Touch Buttons
4.2. Charging and Output Modes
The inverter supports three battery charging modes and various output modes:

Figure 5: Multiple Charging and Output Modes
- Battery Charging Modes:
- Solar Priority: Solar power is prioritized for charging the battery.
- Solar + Utility: Both solar and utility power are used to charge the battery.
- Only Solar: Only solar power is used for battery charging.
- Output Modes:
- Solar Priority: Loads are powered primarily by solar energy.
- Utility Priority: Loads are powered primarily by the utility grid.
- SBU Mode: Solar-Battery-Utility priority. Loads are powered by solar, then battery, then utility.
4.3. Remote Monitoring
The inverter supports remote monitoring and control via the "SMARTESS" app on iOS and Android devices. A WiFi module and GPRS data module are required and must be purchased separately.

Figure 6: Remote Monitoring via SMARTESS App
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
- Cleaning: Keep the inverter's exterior clean and free from dust. The built-in anti-dusk kit helps in harsh environments, but periodic cleaning is still recommended.
- Connection Checks: Periodically inspect all electrical connections (battery, PV, AC input/output) for tightness and signs of corrosion.
- Ventilation: Ensure that the inverter's ventilation openings are not blocked to prevent overheating.
- Firmware Updates: Check the manufacturer's website or app for any available firmware updates to ensure your inverter has the latest features and bug fixes.
6. Troubleshooting
This section provides guidance on common issues. For complex problems, contact technical support.
6.1. Fault Indicators
The fault indicator (4) on the inverter's front panel will illuminate or flash to indicate specific issues. Consult the full product manual for a detailed list of fault codes and their meanings.
6.2. Common Issues and Solutions
- No Power Output:
- Check battery connections and voltage.
- Verify AC input and output breakers are ON.
- Ensure the inverter's ON/OFF switch is in the 'ON' position.
- Low Power Output:
- Inspect PV array for shading or damage.
- Check PV input voltage and current on the LCD display.
- Overload Protection:
- The inverter has built-in overload protection. If activated, reduce the connected load.
- The inverter will attempt to restart after a cool-down period.
- Over-Temperature Protection:
- Ensure adequate ventilation around the inverter.
- Clean any dust or debris from the cooling fins.
6.3. Built-in Protections
The inverter is equipped with comprehensive 360° protection features:

Figure 7: Inverter 360° Protection Features
- Short Circuit Protection
- Over Current Protection
- Over Voltage Protection
- Under Voltage Protection
- Over-Load Protection
- Backfill Protection
- Over-Temperature Protection
- Over Charge Protection
7. Specifications
Detailed technical specifications for the PowMr POW-HVM10.2M Hybrid Solar Inverter.

Figure 8: 10.2KW Hybrid Solar Inverter Key Specifications
| Category | Parameter | Value |
|---|---|---|
| Inverter Model | Model Number | POW-HVM10.2M |
| AC Input | Input Voltage Waveform | Sinusoidal (Utility or generator) |
| Nominal Input Voltage | 230Vac | |
| Nominal Input Frequency | 50/60Hz (Auto detection) | |
| Starting Voltage | 150V | |
| AC Output (Back-Up) | Rated Output Power | 10.2KW |
| Output Voltage Regulation | 230Vac±5% Single phase | |
| Output Frequency | 50Hz | |
| Nominal Output Voltage | 200/230/240VAC | |
| Battery Specification | Battery Type | Lithium and Lead Acid Battery, support user define |
| System Voltage | 48V | |
| Built-in Lithium Battery Activation | Yes | |
| AC Charge & PV Charge Mode | Max. AC Charging Current | 140Amp |
| Max. PV Array Power | 10200W | |
| PV MPPT Voltage Range | 90~500Vdc | |
| Max. PV Array Open Circuit Voltage | 500Vdc | |
| Max. Charging Current (AC+PV) | 160Amp | |
| No-load Power Consumption | 75W | |
| General Specification | Operation Temperature | -10℃ ~50℃ |
| Communication Interface | RS232 (WiFi) | |
| Dimension (L*W*H) | 537*390*130mm | |
| Net Weight | 14.5kg | |
| Inverter Efficiency | 98% | |
| Certifications | Certificate | CE |
8. Warranty and Support
PowMr is committed to providing reliable products and excellent customer service.
8.1. Technical Support
We provide lifetime online support through various channels including WhatsApp, Skype, WeChat, and Email. For any issues after delivery, video call support is available anytime. Our engineers can also provide on-site assistance if necessary.
8.2. Certifications
This product is CE certified, ensuring compliance with European safety, health, and environmental protection requirements.

Figure 9: Product Certifications
9. User Tips
Here are some helpful tips from other users and common inquiries:
- Leverage Support Resources: If you need assistance with installation or operation, remember that English teaching manuals and videos are available. These resources cover every step of machine disassembly, assembly, and operation.
- Performance in Varied Conditions: Users have reported excellent performance even in challenging weather conditions like rain and cloudiness, maintaining good power output with appropriate solar panel configurations.
- Communication is Key: Many users highlight the helpfulness and remarkable communication from the seller's staff, which can be beneficial for any inquiries or support needs.
- Consider Optional Modules: For advanced monitoring and control, remember that the WiFi and GPRS modules for the "SMARTESS" app are optional and need to be purchased separately.