HuBDIC Hmb-1000A

Contents

HuBDIC Wave Pulse Advance Hmb-1000A Low-Frequency Stimulator Instruction Manual

Model: Hmb-1000A

1. Introduction

The HuBDIC Wave Pulse Advance Hmb-1000A is a state-of-the-art low-frequency stimulator designed for personal use to alleviate muscle pain and promote relaxation. This device delivers gentle electrical pulses through self-adhesive pads, targeting various body parts to provide a soothing massage experience. Its portable design and user-friendly interface make it an ideal solution for at-home therapy.

HuBDIC Wave Pulse Advance Hmb-1000A main unit with four electrode pads
Figure 1: HuBDIC Wave Pulse Advance Hmb-1000A main unit with four electrode pads.

2. Package Contents

Please check the package to ensure all components are present:

  • Main Unit (Hmb-1000A)
  • Connection Cables (2 pcs)
  • Electrode Pads (4 pcs)
  • USB Charging Cable
  • Storage Pouch
  • Instruction Manual

If you purchased the Hmb-1000A + WP-400 Suction Pad Set, it will also include:

  • WP-400 Suction Cups (4 pcs)
  • Sponge Pads (4 pcs)
Hmb-1000A main unit with four electrode pads and a set of orange suction cups (WP-400)
Figure 2: Hmb-1000A with optional WP-400 Suction Pad Set.

3. Product Features

  • Low-Frequency Stimulation: Provides effective muscle pain relief and relaxation.
  • Flexible Self-Adhesive Pads: Can be attached to various curved body parts without additional gel.
  • Multiple Massage Modes: 12 distinct massage modes to choose from.
  • Adjustable Intensity: 15 intensity levels for personalized comfort.
  • Adjustable Timer: 15 time settings to control session duration.
  • Large LCD Display: Clear and easy-to-read display for mode, intensity, and remaining time.
  • USB Rechargeable: Convenient charging with a standard phone charger.
  • Portable Design: Compact and easy to carry for use anytime, anywhere.
Promotional image showing the Hmb-1000A device and pads, highlighting its features like flexible pads, 12 modes, 15 intensity levels, and 15 time settings.
Figure 3: Key features of the HuBDIC Wave Pulse Advance.

4. Setup and Charging

4.1 Initial Charging

Before first use, fully charge the device. Connect the USB charging cable to the main unit and a compatible USB power source (e.g., phone charger, computer USB port). The battery icon on the LCD will blink during charging and stop blinking when fully charged.

  • The device cannot be used while charging.
  • If the charging cable is connected during use, the device will automatically turn off.

4.2 Connecting Pads

  1. Connect the connection cables to the main unit.
  2. Attach the electrode pads to the other end of the connection cables.
  3. Carefully peel off the protective film from the electrode pads.
  4. Apply the pads to the desired area of your body. Ensure the skin is clean and dry for optimal adhesion.
User applying electrode pads to the shoulder, holding the main unit
Figure 4: Proper application of electrode pads.

5. Operating Instructions

The Hmb-1000A features a user-friendly interface with a large LCD display and intuitive buttons.

Close-up of the Hmb-1000A main unit display and control buttons
Figure 5: Hmb-1000A control panel and display.
  1. Power On/Off: Press the Power button (labeled "전원" in Korean) to turn the device on or off.
  2. Select Mode:
    • Use the Mode Selection buttons (labeled "순환" for Circulation, "회복" for Recovery, "집중" for Concentration) to choose a general massage type.
    • Further refine your selection using the Body Part Selection buttons (labeled "어깨" for Shoulder, "등" for Back, "팔다리" for Leg/Arm, "관절" for Joint, "발바닥" for Sole, "복부" for Abdomen).
    • You can also choose between Automatic ("자동") or Manual ("수동") modes. Manual mode allows selection of specific massage techniques like "누르기" (Pressing), "두드리기" (Tapping), "주무르기" (Kneading), "마사지" (Massage).
  3. Adjust Intensity: Use the Intensity Adjustment buttons (up/down arrows next to "강도") to set the desired intensity level from 1 to 15.
  4. Set Time: Use the Time Adjustment buttons (up/down arrows next to "남은시간") to set the session duration from 1 to 15.
  5. Start Massage: Once settings are configured, the massage will begin.
  6. End Session: The device will automatically turn off after the set time. You can also manually turn it off by pressing the Power button.

6. Maintenance and Storage

6.1 Cleaning

  • Main Unit: Wipe the main unit with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Electrode Pads: After each use, gently wipe the adhesive surface of the pads with a damp cloth (water only) to remove any skin oils or debris. Allow them to air dry completely before reattaching the protective film.

6.2 Storage

  • Always reattach the protective film to the electrode pads after use to maintain their adhesive quality and prolong their lifespan.
  • Store the main unit, pads, and cables in the provided storage pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep out of reach of children.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is depleted.
Charging cable is connected.
Charge the device fully.
Disconnect the charging cable before attempting to power on.
No sensation or weak sensation.Pads are not properly attached.
Intensity level is too low.
Pads have lost adhesion.
Ensure pads are firmly attached to clean, dry skin.
Increase the intensity level gradually.
Clean pads or replace with new ones if adhesion is lost.
Device turns off automatically during use.Session time has expired.
Charging cable was connected during use.
This is normal operation. Restart if desired.
Ensure charging cable is disconnected before and during use.

8. Specifications

FeatureDetail
ModelHmb-1000A
Item TypeMassage & Relaxation
Usage ModeElectric
MaterialABS
Power SourceUSB Rechargeable
Massage Modes12
Intensity Levels15
Time Settings15
Package Dimensions (approx.)20 cm (L) x 15 cm (W) x 5 cm (H)
Package Weight (approx.)1.0 kg
OriginMainland China

9. Warranty and Support

HuBDIC provides a direct operational responsibility guarantee for its products.

  • Warranty Period: Free A/S (After-Sales Service) is provided for product defects within 1 year from the date of purchase.
  • Exclusions: Consumable items such as electrode pads and batteries are not covered under the free A/S warranty.
  • Genuine Product: Ensure you purchase from an official HuBDIC seller. A/S and technical support may not be provided for products purchased from non-official distributors.
  • Customer Negligence: Product failures due to customer negligence may be subject to paid A/S.

Contact Information:

  • HuBDIC Customer Center: 1644-9981
  • HuBDIC A/S Center: 1644-3375
HuBDIC warranty and customer service contact information
Figure 6: HuBDIC Warranty and Support Information.

10. User Tips

  • For best results, ensure your skin is clean and dry before applying the electrode pads.
  • Start with a low intensity level and gradually increase it to find your comfortable setting.
  • Take advantage of the various massage modes and body part selections to customize your therapy.
  • Always reattach the protective film to the pads after use to maintain their stickiness and extend their life.
  • The device is designed for portability; remember to charge it fully before travel for uninterrupted use.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.