HUIDA OP-23

Contents

HUIDA Portable USB Oxygen Pump OP-23 Instruction Manual

Model: OP-23

1. Introduction

Thank you for choosing the HUIDA Portable USB Oxygen Pump Model OP-23. This ultra-silent, dual-purpose oxygen pump is designed to provide essential aeration for small aquariums, turtle tanks, and is also suitable for outdoor fishing scenarios and fresh transportation. Its compact size and USB charging capability make it highly versatile and convenient.

HUIDA Portable USB Oxygen Pump with accessories and fish in an aquarium
The HUIDA Portable USB Oxygen Pump OP-23, showcasing its dual-purpose design for mute and power-saving operation.

2. Package Contents

Please check the package to ensure all items are present:

  • 1 x Oxygen Pump (Model OP-23)
  • 1 x Charging Cable (USB)
  • 1 x 1-meter Air Tube
  • 1 x Air Stone

3. Specifications

FeatureSpecification
ModelOP-23
MaterialABS
Gas Volume2 L/min
Air OutletSingle Hole
Dimensions (L x W x H)9.7 cm x 6.5 cm x 3.5 cm (3.81 in x 2.55 in x 1.37 in)
Weight0.217 kg
Sound LevelUltra-quiet (20-40 dB)
TypeFish (Aquarium)
UsesTwo uses (Continuous/Intermittent)
ColorWhite
CompatibilityFreshwater and Saltwater Aquariums
Dimensions of the HUIDA Portable USB Oxygen Pump OP-23
Detailed dimensions of the oxygen pump.
Ultra Quiet feature of the HUIDA Portable USB Oxygen Pump OP-23 with decibel comparison chart
The OP-23 operates at an ultra-quiet 20-40dB, significantly lower than typical environmental sounds.

4. Setup

  1. Connect one end of the 1-meter air tube to the air outlet of the oxygen pump.
  2. Attach the air stone to the other end of the air tube.
  3. Place the air stone into the aquarium or water container.
  4. Important Safety Note: It is crucial to place the oxygen pump above the water level line to prevent water backflow into the pump. The air pump is not waterproof. Placing it in a higher position than the fish tank avoids water backflow that could damage the unit. Damage caused by water backflow is not covered by warranty.
Installation diagram showing the oxygen pump placed above the water level to prevent backflow
Proper installation requires the oxygen pump to be positioned above the water level.

5. Operating Instructions

The HUIDA OP-23 features continuous and intermittent dual-mode operation, easily switched with a single button.

  1. Power On/Off: Press and hold the power button (located on the top of the pump) for a few seconds to turn the pump on or off.
  2. Switch Modes: Once the pump is on, short press the power button to cycle between continuous and intermittent modes. The blue indicator lights will show the current mode and battery level.
  3. Battery Indicator: The blue bars on the display indicate the remaining battery charge.
Video demonstrating how to power on, switch modes, and observe the battery indicator on the oxygen pump.
HUIDA Portable USB Oxygen Pump OP-23 in an outdoor fishing setting, highlighting continuous and intermittent modes
The pump offers continuous and intermittent modes, suitable for various applications like outdoor fishing.
HUIDA Portable USB Oxygen Pump OP-23 suitable for both freshwater and saltwater aquariums
The oxygen pump is versatile, functioning effectively in both freshwater and saltwater environments.

6. Charging

The oxygen pump is conveniently charged via a standard USB connection.

  1. Connect the provided USB charging cable to the charging port on the oxygen pump.
  2. Connect the other end of the USB cable to a compatible power source such as a wall charger, mobile power bank, car charger, or a computer's USB port.
  3. The battery indicator lights on the pump will illuminate to show that it is charging.
  4. Avoid overcharging the device to prolong battery life.
USB power charging options for the HUIDA Portable USB Oxygen Pump OP-23
The pump can be charged using various USB power sources including wall chargers, power banks, and car chargers.

7. Maintenance

  • Air Stone: Regularly check and clean the air stone to prevent blockages and ensure optimal bubble production. Replace if heavily clogged or damaged.
  • Air Tube: Inspect the air tube for any kinks, cracks, or blockages that could restrict airflow.
  • Pump Unit: Keep the oxygen pump unit dry and clean. Wipe with a soft, dry cloth. Do not immerse the pump in water.
  • Storage: When not in use for extended periods, ensure the pump is fully charged and stored in a cool, dry place.

8. Troubleshooting

ProblemPossible CauseSolution
No bubbles or weak airflow
  • Air stone clogged
  • Air tube kinked or blocked
  • Low battery
  • Pump not turned on
  • Clean or replace air stone
  • Straighten or clear air tube
  • Charge the pump
  • Press and hold power button to turn on
Pump not turning on
  • Battery depleted
  • Faulty charging cable/adapter
  • Charge the pump fully
  • Try a different USB charging cable or adapter
Water backflow into pumpPump placed below water levelAlways ensure the pump is placed above the water level. Consider using a check valve (not included) for added protection.

9. User Tips

  • Many users appreciate the quiet operation of this pump, making it suitable for bedrooms or quiet environments.
  • To maximize battery longevity, avoid leaving the pump connected to a charger for excessively long periods after it's fully charged.
  • The compact design makes it highly portable for various uses, including temporary aeration during power outages or for live bait during fishing trips.

10. Warranty & Support

For any issues or inquiries regarding your HUIDA Portable USB Oxygen Pump OP-23, please contact the seller or refer to your purchase documentation for warranty information. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.