1. Introduction
Welcome to the Aairsk GT300 Electric Bicycle user manual. This manual provides essential information for the assembly, safe operation, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

2. Important Safety Warnings
⚠ WARNING:
- Please be aware of potential fire risks and strictly follow the instructions for charging and storage of the battery.
- Always wear appropriate protective equipment, such as a helmet, knee pads, and elbow pads, while using the product.
- Fully comply with all applicable local laws and regulations regarding electric bicycle usage.
- Do not modify the electric bicycle or its components, as this may compromise safety and void the warranty.
- Ensure all bolts and quick releases are securely tightened before each ride.
3. Package Contents
Upon opening the package, please verify that all items are present and undamaged. If anything is missing or damaged, contact your seller immediately.

- Aairsk GT300 Electric Bicycle (main frame, wheels, handlebars, seat)
- Battery Charger
- Multi-tool Kit
- User Manual (this document)
- Pedals
- Front Fender (if applicable)
4. Assembly and Initial Setup
Your Aairsk GT300 Electric Bicycle comes partially assembled. Follow these steps to complete the assembly:
- Unpack the Bicycle: Carefully remove all packaging materials and lift the bicycle out of the box.
- Install the Handlebars: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
- Install the Front Wheel: Mount the front wheel into the fork dropouts. Ensure the quick-release skewer or axle nuts are properly tightened.
- Install the Pedals: Identify the left (L) and right (R) pedals. Thread the 'L' pedal counter-clockwise into the left crank arm and the 'R' pedal clockwise into the right crank arm. Tighten firmly with a wrench.
- Install the Seat Post: Insert the seat post into the frame's seat tube. Adjust the seat height for comfortable riding and secure it with the quick-release lever or bolt.
- Check Brakes and Gears: Ensure both front and rear brakes are functioning correctly. Test the gear shifter to confirm smooth transitions through all 7 speeds.
- Inflate Tires: Inflate the tires to the recommended pressure indicated on the tire sidewall.
The Aairsk GT300 features a lightweight geometry frame with built-in wiring for stability and a sleek design.

5. Operating Instructions
5.1. Powering On/Off and Display
The Aairsk GT300 is equipped with a Smart LCD Screen that offers 5 levels of pedal-assisted mode. To power on the bike, press and hold the power button on the LCD display. The display will show your current speed, battery level, and assist level.

Speed Gears (PAS Modes):
- Speed 1: Max 12 km/h
- Speed 2: Max 15 km/h
- Speed 3: Max 18 km/h
- Speed 4: Max 21 km/h
- Speed 5: Max 25 km/h
5.2. Riding Modes
Your e-bike offers three versatile working modes for different riding preferences:

- Bicycle Mode: Ride like a regular bicycle for exercise, with no electrical assistance.
- Pedal Assist Mode (PAS): The motor provides assistance as you pedal. Choose from 5 speed gears (levels) to match your desired effort and terrain.
- Throttle Mode: Twist the throttle on the right-hand grip to power your ride without pedaling.
5.3. Gear Shifting
The Aairsk GT300 is equipped with a Shimano 7-Speed Derailleur for smooth and precise gear changes. Use the shifter on the handlebars to select the appropriate gear for your speed and terrain. Shift down for climbing hills and up for flat terrain or descents.

5.4. Braking System
The bike features dual disc brakes (front and rear 160mm discs) for sensitive, quick, stable, and powerful progressive braking, ensuring a safer ride.

5.5. Suspension System
Experience a good riding experience with the adjustable shock absorbing front fork and lockable fork suspension. This system effectively filters riding shock and reduces bumps and vibrations, making cycling smoother and more controllable.


6. Battery and Charging
The Aairsk GT300 is powered by a built-in 36V 10AH Lithium-ion battery, designed for a longer battery life. The battery is equipped with multiple protections including over-temperature, over-voltage, over-charger, and full battery outage protection.


Charging Instructions:
- Ensure the bicycle is turned off before charging.
- Locate the charging port on the bicycle frame.
- Connect the charger to the charging port, then plug the charger into a standard wall outlet.
- The indicator light on the charger will typically show red during charging and turn green when fully charged.
- Do not overcharge the battery. Disconnect the charger once charging is complete.
- Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your Aairsk GT300 Electric Bicycle.
- Tire Pressure: Check tire pressure before each ride and inflate to the recommended PSI.
- Brakes: Regularly inspect brake pads for wear and ensure brake levers are responsive. Adjust or replace as needed.
- Chain: Keep the chain clean and lubricated to ensure smooth gear changes and prevent rust.
- Bolts and Fasteners: Periodically check all bolts, nuts, and quick releases for tightness.
- Battery Care: Avoid fully discharging the battery. Charge it regularly, even if not in use for extended periods.
- Cleaning: Clean the bicycle with a damp cloth. Avoid using high-pressure washers directly on electrical components.
- Professional Service: For complex repairs or electrical issues, consult a qualified bicycle technician.
8. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Battery low or disconnected; loose wiring; display issue. | Charge battery; check battery connection; inspect wiring; contact support. |
| Motor not assisting | PAS level set to 0; brake levers engaged; motor connection loose. | Increase PAS level; ensure brake levers are fully released; check motor wiring. |
| Short battery range | Under-inflated tires; riding uphill frequently; heavy load; old battery. | Inflate tires to correct pressure; use lower PAS levels; reduce load; consider battery replacement if very old. |
| Brakes squealing or ineffective | Dirty brake pads/rotors; worn brake pads; misaligned calipers. | Clean brake components; replace worn pads; adjust calipers. |
9. Specifications
The Aairsk GT300 Electric Bicycle is available in 26-inch and 24-inch wheel sizes, offering slightly different dimensions to suit various rider heights.
| Feature | Detail |
|---|---|
| Model Number | Aairsk GT300 |
| Certification | CE |
| Rated Passenger Capacity | One Seat |
| Style | Standard Type |
| Max Speed | <25km/h |
| Range per Power (General) | 10 - 30 km (Note: Pedal-assisted mode offers 35-55 km) |
| Wattage | 200 - 250w |
| Power Supply / Source | Lithium Battery (36V 10AH) |
| Motor Type | Brushless |
| Folded | No |
| Frame Material | Carbon Steel |
| Gears | Shimano 7-Speed |
| Brakes | Dual Disc Brakes (160mm) |
| Suspension | Adjustable & Lockable Front Fork Suspension |
9.1. Dimensions (26-inch Model)

| Measurement | Value |
|---|---|
| Wheel Size | 26 inches |
| Recommended Height | 5'4" - 6'4" |
| Bicycle Weight | 58.6 LBS |
| Max Load Capacity | 330 LBS |
| Total Length (A) | 69 inches |
| Seat to Ground Height (B) | 41 inches |
| Handlebar to Ground Height (C) | 43 inches |
| Seat to Ground Height (D) | 33 inches |
| Top Tube Length (E) | 33 inches |
| Stand Height (F) | 21 inches |
9.2. Dimensions (24-inch Model)

| Measurement | Value |
|---|---|
| Wheel Size | 24 inches |
| Recommended Height | 60 - 70 inches |
| Bicycle Weight | 58.6 LBS |
| Max Load Capacity | 330 LBS |
| Total Length (A) | 59.06 inches |
| Seat to Ground Height (B) | 37.40 inches |
| Handlebar to Ground Height (C) | 43.31 inches |
| Seat to Ground Height (D) | 33.07 - 37.80 inches |
| Top Tube Length (E) | 29.53 inches |
| Stand Height (F) | 19.69 inches |
10. User Tips
- For optimal battery life, avoid storing the bike in extremely hot or cold conditions.
- Regularly check and tighten all bolts, especially after the first few rides, as components can settle.
- Experiment with different PAS levels to find the most comfortable and efficient riding experience for your commute or leisure rides.
- When riding in wet conditions, be extra cautious and allow for longer braking distances.
11. Warranty and Support
For warranty information, technical support, or to order replacement parts, please contact your original seller or refer to the product's purchase documentation. Keep your proof of purchase for any warranty claims.
For return and refund policies, please refer to the seller's specific terms and conditions.