TKLBLS Z8

Contents

TKLBLS Z8 8-Channel Audio Mixer User Manual

Model: Z8 | Brand: TKLBLS

1. Introduction

The TKLBLS Z8 is an 8-channel professional audio mixer designed for a wide range of applications, including live broadcasting, K-song recording, DJ mixing, performances, and conferences. It features a high-fidelity DSP audio processing chip for lower noise and improved sound restoration. Key functionalities include 99 built-in DSP effects, a USB audio interface for PC and mobile connectivity, Bluetooth 5.0 wireless streaming, 48V phantom power, and a 3-band equalizer on each channel.

TKLBLS Z8 8-Channel Audio Mixer front view

Figure 1: TKLBLS Z8 8-Channel Audio Mixer Overview

2. Key Features

  • 8-Channel Input: Multiple microphone and line inputs for versatile connectivity.
  • 99 DSP Effects: Built-in professional reverberation effects for enhanced audio.
  • USB Audio Interface: Supports lossless audio transmission for live broadcasting and recording with PC and mobile devices.
  • Bluetooth 5.0: Quick and stable wireless streaming from compatible devices.
  • 48V Phantom Power: Essential for condenser microphones, ensuring safer and more reliable operation.
  • 3-Band EQ: High, Mid, and Low tone adjustment knobs on each channel for precise sound shaping.
  • Low Cut Button: Attenuates frequencies below 80Hz to reduce unwanted vibration and wind noise from microphones.
  • High-Fidelity DSP Chip: Advanced audio processing for lower noise and superior sound quality.
DSP Intelligent Chip for Hi-Fi Audio Processing

Figure 2: High-Fidelity DSP Chip for superior sound

3. Package Contents

Please check the package for the following items:

  • TKLBLS Z8 Audio Mixer
  • Power Adapter (Inbox adaptor: Yes)
  • User Manual (this document)

4. Setup Guide

4.1 Component Identification

TKLBLS Z8 Mixer labeled diagram of controls and ports

Figure 3: Product Parameter Diagram (Control Layout)

  1. Microphone Input (MIC/LINE): Combo jacks for XLR microphones or 1/4" line-level instruments.
  2. Power Amplification (PAD, HPF): Buttons for input attenuation (PAD) and high-pass filter (HPF).
  3. Gain Knob: Adjusts the input sensitivity for each channel.
  4. Equalizer Knobs (HIGH, MID, LOW): Adjusts treble, mid-range, and bass frequencies.
  5. Auxiliary Knob (AUX): Controls the send level to the AUX output.
  6. Effect Knob (FX): Controls the send level to the internal DSP effects processor.
  7. Pan Knob: Adjusts the stereo position of the channel.
  8. Peak LED: Illuminates when the input signal is too high, indicating potential clipping.
  9. Volume Fader (LEVEL): Adjusts the output level of each channel.
  10. Digital Audio Player: Section for USB playback/recording and Bluetooth functions.
  11. 99 DSP: Display and controls for selecting and adjusting effects.
  12. Main Meters: LED level indicators for the main stereo output.
  13. Phantom Power Switch (48V): Activates 48V phantom power for condenser microphones.
  14. Phones: Headphone output jack and level control.
  15. Stereo Out: Main stereo output jacks (L/R).
  16. FX Send: Output for sending signal to external effects processors.
  17. Aux Send: Auxiliary output.
  18. USB Interface: For connecting to a computer or mobile device.
  19. Power Switch (ON/OFF): Turns the mixer on or off.
  20. Power Interface: Connects the power adapter.

4.2 Connecting Devices

  1. Power Connection: Connect the provided power adapter to the Power Interface on the rear of the mixer and then to a suitable power outlet. Ensure the Power Switch is in the OFF position before connecting.
  2. Microphones/Instruments: Connect microphones to the MIC/LINE inputs using XLR cables. For instruments or line-level devices, use 1/4" TRS/TS cables.
  3. Speakers/Amplifiers: Connect your main speakers or power amplifier to the STEREO OUT (L/R) jacks.
  4. Headphones: Plug your headphones into the PHONES jack for monitoring.
  5. Computer/Mobile Device (USB): Connect a USB cable from the mixer's USB interface to your computer or mobile device (OTG adapter may be required for mobile). The mixer will function as an external sound card.
  6. Bluetooth Device: Ensure no USB device is connected to the Digital Audio Player section. Press the 'MODE' button until 'BLUE' is displayed. On your Bluetooth device, search for 'TKLBLS Z8' and pair.
TKLBLS Z8 Mixer connected to a laptop via USB

Figure 4: Computer Wired Connection

TKLBLS Z8 Mixer with Bluetooth and USB input icons

Figure 5: Bluetooth Wireless Streaming and USB Input

5. Operating Instructions

5.1 Powering On and Initial Setup

  1. Ensure all connections are secure and all channel LEVEL faders are at their minimum position.
  2. Turn on the mixer using the Power Switch.
  3. If using condenser microphones, activate the 48V PHANTOM power switch. A red LED will indicate it is active.
  4. Slowly raise the main STEREO LEVEL faders to a comfortable listening level.

5.2 Channel Control

  1. Gain Adjustment: For each active channel, speak or play into the microphone/instrument. Slowly increase the GAIN knob until the PEAK LED flashes only occasionally. Avoid constant illumination of the PEAK LED to prevent distortion.
  2. Equalization (EQ): Use the HIGH, MID, and LOW knobs to shape the tone of each channel.
    • HIGH (Tweeter adjustment): Adjusts frequencies around 10kHz (+/-15dB).
    • MID (Mid tone adjustment): Adjusts frequencies around 2.5kHz (+/-15dB).
    • LOW (Bass adjustment): Adjusts frequencies around 80Hz (+/-15dB).
  3. Low Cut Filter: Press the HPF (High-Pass Filter) button to activate the low cut function, which attenuates frequencies below 80Hz. This is useful for reducing rumble and wind noise.
  4. Pan Adjustment: Use the PAN knob to position the channel's sound within the stereo field (left to right).
  5. Level Adjustment: Use the channel LEVEL fader to set the individual volume of each channel in the main mix.
Close-up of EQ knobs and 48V Phantom Switch

Figure 6: Detailed view of EQ and Phantom Power controls

5.3 DSP Effects

The mixer features 99 built-in DSP effects. To use them:

  1. Select Effect: Rotate the PROGRAM knob in the 99 DSP section to browse through the available effects (00-99).
  2. Confirm Effect: Once you've found the desired effect number, rotate the PROGRAM knob again to confirm the selection.
  3. Adjust Effect Level: Use the FX knob on each channel to send the desired amount of that channel's signal to the effects processor.
  4. Effect List:
    00-39: REVERB
    80-84: CHORUS+ECHO
    40-49: PINGPONG DELAY
    50-59: FLANGER
    60-69: KEY ECHO
    70-79: AUTO WAH+ECHO
    90-93: VOICE CHANGER
    94-96: TREMOLO
    97-99: ROTARY SPEAKER
Diagram showing 99 DSP effects list and selection

Figure 7: DSP Effects Processor and Effect List

5.4 USB Audio Interface (Recording/Playback)

When connected to a computer or mobile device via USB, the mixer acts as an external sound card.

  1. PC Connection: Connect the mixer to your PC via USB. Your operating system should automatically detect it. Select the mixer as your audio input/output device in your recording software or system settings.
  2. Mobile Connection: Connect the mixer to your mobile phone via USB (an OTG adapter may be required). The mixer supports lossless transmission for live broadcasting and recording.

5.5 Bluetooth Function

  1. Ensure no USB device is connected to the Digital Audio Player section.
  2. Press the 'MODE' button on the Digital Audio Player until 'BLUE' is displayed on the screen.
  3. On your Bluetooth-enabled device (e.g., smartphone), search for available Bluetooth devices and select 'TKLBLS Z8' to pair.
  4. Once paired, you can stream audio wirelessly from your device to the mixer.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the mixer's surface. Do not use liquid cleaners or solvents.
  • Storage: Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ventilation: Ensure proper ventilation around the mixer to prevent overheating. Do not block any vents.
  • Power Off: Always turn off the mixer and disconnect the power adapter when not in use for extended periods.

7. Troubleshooting

No Sound Output:
  • Check all cable connections (inputs, outputs, power).
  • Ensure the mixer is powered on.
  • Verify that channel LEVEL faders and main STEREO LEVEL faders are raised.
  • Check GAIN settings for each channel; ensure PEAK LEDs are not constantly lit.
  • Confirm that your speakers/headphones are connected and powered on.
Distorted Sound:
  • Reduce GAIN settings on input channels if PEAK LEDs are constantly lit.
  • Lower channel LEVEL faders or main STEREO LEVEL faders.
  • Check input sources for distortion.
  • Ensure cables are not damaged.
Bluetooth Connection Issues:
  • Ensure no USB device is connected to the Digital Audio Player.
  • Verify the mixer is in 'BLUE' mode.
  • Make sure your Bluetooth device is within range and not connected to another device.
  • Try unpairing and re-pairing the device.
Phantom Power Not Working:
  • Ensure the 48V PHANTOM switch is engaged and its indicator light is on.
  • Check if your microphone requires phantom power.

8. Specifications

TKLBLS Z8 Mixer dimensions and detailed specifications table

Figure 8: Product Dimensions and Technical Specifications

CategoryParameterValue
GeneralDimensions (L x W x H)24cm x 26cm x 5.5cm
Net Weight1.3kg
Input/OutputTRIM range0dB to +10dB
Line InputElectronically balanced
Bandwidth10 Hz to 60kHz ±3dB
Distortion (THD & N)0.01% at 4 dBu, 1kHz, Bandwidth 80 kHz
Line level range+10dBu to -40dBu
EqualizationHi Shelving10kHz +/-15dB
Mid Range2.5kHz +/-15dB
Lo Shelving80Hz +/-15dB
Master Mix SectionMax Output+22 dBu balanced
Control Room Out+22 dBu unbalanced
Signal-To-Noise Ratio112dB, all channels at Unity Gain
Power SupplyUSA/Canada~120V AC, 60 Hz
U.K./Australia~240V AC, 50 Hz
China~220V AC, 50 Hz
ConnectivityBluetooth Version5.0
FeaturesDSP Effects99 built-in
Phantom Power48V

9. User Tips

  • Gain Staging: Always set your input gain (TRIM/GAIN knob) correctly first. Aim for the PEAK LED to flash only occasionally. This ensures a strong signal without distortion.
  • EQ for Clarity: Use the 3-band EQ to fine-tune the sound of each input. A slight cut in the mid-range can often help vocals sit better in a mix, while boosting highs can add presence.
  • Experiment with DSP: The 99 DSP effects offer a wide range of creative possibilities. Experiment with different reverb types for vocals or instruments, and try delay or chorus for unique textures.
  • Monitor with Headphones: Use the PHONES output to monitor your mix closely, especially when setting levels and effects, to catch any subtle issues before they reach your main output.
  • USB for Recording: When using the USB audio interface for recording, ensure your computer's audio settings are configured to use the mixer as the input device for optimal quality.

10. Safety Information

  • Do not expose this device to rain or moisture.
  • Do not remove the cover or attempt to service the unit yourself. Refer all servicing to qualified personnel.
  • Ensure the power supply voltage matches the requirements specified for your region.
  • Avoid placing the unit near heat sources or in direct sunlight.
  • Keep out of reach of children.
  • Always disconnect the power adapter before cleaning or moving the unit.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.