Introduction
The Irado UV-98 PLUS is a versatile multi-band walkie-talkie designed for amateur radio enthusiasts, offering a wide range of communication capabilities including GPS APRS, Cross Band Repeater functionality, and reception across various frequency bands like AM, FM, CB, SSB, and HF. With a 10W output power and a large 2.4-inch screen, it provides robust performance and user-friendly operation. This manual provides essential information for the safe and effective use of your device.
Safety Information
Please read and understand all safety instructions before using the Irado UV-98 PLUS. Failure to follow these instructions may result in injury, damage to the device, or voiding your warranty.
- Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
- Do not expose the radio to direct sunlight for extended periods or place it near heating appliances.
- Avoid using the radio if the antenna is damaged, as it may cause minor burns.
- Keep the radio away from medical devices to prevent interference.
- Use only manufacturer-approved batteries and chargers.
- Do not disassemble or modify the radio.
- Ensure proper ventilation when charging.
Package Contents
Verify that all items are present in your package:
- 1 x Irado UV-98 PLUS Radio
- 1 x Antenna
- 1 x Battery
- 1 x Charger Base
- 1 x Belt Clip
- 1 x Type-C USB Cable
- 1 x Power Adapter

Image: Irado UV-98 Plus GPS APRS Walkie Talkie with standard accessories and dimensions.
Product Features
- GPS APRS: Automatically or manually send GPS location information to the APRS Network. Other users can view your real-time location on a map.
- Multi-Band Reception: Supports AM/USB/LSB/CW reception across various bands including SW (2.3-30MHz), MW (520-1710KHz), LW (153-279KHz), and Aviation AM (108-136MHz).
- High Power Output: Up to 10W RF power for strong and clear transmissions.
- Cross Band Repeater: Extend communication range by repeating signals between different frequency bands.
- Large 2.4" Screen: Provides clear display of channel information, frequencies, and settings.
- 1024 Channels + 3 VFO Channels: Ample storage for your preferred frequencies and settings.
- Triple Frequency Standby: Monitor three frequencies simultaneously.
- Triple PTT Transmission: Flexible Push-To-Talk options.
- S9+ Field Strength Indicator: Real-time display of signal strength values.
- One-Click Frequency Measurement & Remote Sub-Tone Scan: Convenient tools for frequency identification.
- Customizable Functions: Personalize keyboard and side key functions.
- Tone Functions: Supports two emission end tones, MDC end tones, and editable 1750 Hz tone to wake up repeaters.
- Editable Device & Channel Names: Manually edit device name (can be used as call sign) and channel names in Chinese and English.
- NOAA Weather Forecast: Access 11 NOAA weather channels (available only in the United States).
- Power-Saving Mode: Gradually deepens power saving ratio over time.
- Scanning Functions: Frequency scan, channel scan, and spectrum scanning.
- VOX Function: Voice Activated Transmit for hands-free operation.
- Monitoring Function: Listen to weak signals.
- Emergency Alarm: For critical situations.
- DTMF Encoding/Decoding: For advanced signaling.
- Type-C Fast Charging: Modern and convenient charging option, in addition to the base charger.

Image: Six-segment RX/TX compatibility on the UV-98 Plus.

Image: 10W RF Power and Shortwave Antenna compatibility.

Image: Air Band RX capability for diverse needs.

Image: Type-C fast charging option for convenience.

Image: GPS APRS functionality for real-time location sharing.
Setup and Initial Use
1. Battery and Antenna Installation
Ensure the battery is securely attached to the back of the radio. Screw the antenna clockwise onto the antenna connector until it is finger-tight. Do not overtighten.
2. Charging the Battery
The UV-98 PLUS offers two charging methods:
- Base Charger: Place the radio into the provided charging base. Ensure the charging contacts align. The indicator light on the charger will show charging status.
- Type-C USB Charging: Connect the provided Type-C USB cable to the radio's Type-C port and then to a compatible USB power source (e.g., power adapter, computer, car charger).
3. Programming Channels
To program channels and customize settings, you will need a dedicated Type-C interface Programming Cable provided by the manufacturer. Channel programming is performed using the UV-98 PLUS frequency writing software on a computer. A regular mobile phone data cable or generic write frequency cable cannot establish a communication connection. If you require the frequency writing software, please contact customer support.
Operating Instructions
Frequency Bands and Modes
The radio supports a wide range of frequencies and modes. Note that some frequency ranges require a compatible antenna to be replaced before use.
- CB (Citizen Band): 27MHz RX/TX
- FM Radio: 64-108MHz RX
- Shortwave (SW): 2.3-30MHz RX (AM/USB/LSB/CW reception)
- Mediumwave (MW): 520-1710KHz RX
- Longwave (LW): 153-279KHz RX
- VHF/UHF Transmit/Receive: 18-64MHz TX/RX, 136-520MHz TX/RX
- Extended Receive (RX only): 18-620MHz, 840-1000MHz (AM/FM/SSB)
- Aviation AM: 108-136MHz RX
Transmitting Bands (Region Specific):
- FCC Version: UHF 420-450MHz, VHF 144-148MHz
- CE/UKCA Version: UHF 430-440MHz, VHF 144-146MHz
- NORMAL Version: UHF 400-470MHz, VHF 136-174MHz, UHF 350-400MHz
- IC Version: UHF 430-450MHz, VHF 144-148MHz
Channel Management
- 1024 Channels: Store your most used frequencies.
- Three VFO Channels: For direct frequency input and experimentation.
- Triple Frequency Standby: Monitor up to three different frequencies simultaneously.
Advanced Functions
- Cross Band Repeater: Activates the radio to repeat signals between different frequency bands. Refer to the full programming guide for detailed setup.
- Triple PTT Transmission: Utilize multiple Push-To-Talk buttons for different channels or functions.
- S9+ Field Strength Indicator: Observe real-time signal strength on the display.
- Scanning Functions: Use frequency scan to find active signals, channel scan to monitor programmed channels, and spectrum scan for visual frequency analysis.
- VOX (Voice Activated Transmit): Enables hands-free transmission when voice is detected. Adjust sensitivity in settings.
- Monitoring Function: Temporarily disable squelch to listen for very weak signals.
- Emergency Alarm: Activate the alarm function in urgent situations.
- Tone Functions: Send 1750 Hz tone to activate repeaters. Utilize DTMF encoding for selective calling or remote control functions.
- Customization: Customize keyboard and side key functions for quick access to features. Edit device name (call sign) and channel names directly on the device. Personalize the startup logo and prompt.
- Power-Saving Mode: Enable this feature to conserve battery life, with the radio gradually deepening its power-saving ratio over time.
Specifications
General
| Parameter | Value |
|---|---|
| Frequency Range | Radio: FM 64-108MHz, SW 2.3-30MHz, MW 520-1710KHz, LW 153-279KHz RX: 18-620MHz, 840-1000MHz TX: 18-32MHz, 136-174MHz, 400-520MHz |
| Channel Capacity | 1024 Channels + 3 VFO Channels |
| Channel Spacing (W/N) | Analog: 25kHz/12.5kHz, Digital: 12.5K |
| Voltage | 7.4V DC |
| Working Mode | Same frequency simplex, different frequency simplex |
| Antenna | Removable Antenna |
| Frequency Stability | ±2.5ppm |
| Working Temperature | -20°C to +60°C |
| Dimensions | 149 x 64 x 37 mm (approx.) |
| Weight | Approx. 307g |
| Battery Capacity | 2400mAh |
| Material | Plastic |
| Waterproof / Water-Resistant | No |
| Display | Yes |
| Maximum Range | 5km-10km |
| Certification | CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee |
Receiving Part
| Parameter | Value |
|---|---|
| RX Current | ≤350mA |
| Standby Current | ≤100mA |
Transmitting Part
| Parameter | Value |
|---|---|
| Modulation Mode | F3E |
| Maximum Frequency Deviation (W/N) | ≤5KHz/≤2.5KHz |
| Output Power (UHF/VHF) | ≤10W |
| TX Current | 2500mA |
| Intermodulation (W/N) | 65dB/60dB |
| Audio Distortion | <5% |
| Audio Output Power | 1W (16Ω) |
Note: The above specifications may change due to technical improvement without prior notice or liability.
Troubleshooting and Important Notes
- Programming Cable: The walkie-talkie requires a dedicated Type-C interface Programming Cable from the manufacturer for computer connection and channel programming. Standard data cables will not work.
- GPS Functionality: The GPS function may not work in some specific regions (e.g., certain areas in Russia) due to local regulations or signal availability.
- Antenna Compatibility: When switching frequency ranges, especially for 18-64MHz (e.g., CB 27MHz or 50MHz), you must replace the antenna with one compatible with that specific frequency range to ensure proper operation and prevent damage.
- Frequency Range Switching: The working range of the frequency band is 18-64MHz, 64-642MHz, and 840-1000MHz. These three ranges cannot work simultaneously.
User Tips
- Always ensure your antenna is correctly attached and compatible with your selected frequency band before transmitting to prevent damage to the radio.
- Familiarize yourself with the customizable keyboard and side key functions to optimize your radio's usability for your specific needs.
- When experiencing issues with GPS, consider local signal conditions or regional restrictions.
- For optimal battery life, utilize the power-saving mode, especially during periods of less active use.
Support
For technical assistance, software downloads, or further inquiries, please contact your seller or refer to the official product support channels. Keep your purchase receipt for any support claims.